DMA ch status register offset change in acp7.0 platform
Incorrect DMA channel status register offset check lead to firmware boot failure.
[ 14.432497] snd_sof_amd_acp70 0000:c4:00.5: ------------[ DSP dump start ]------------ [ 14.432533] snd_sof_amd_acp70 0000:c4:00.5: Firmware boot failure due to timeout [ 14.432549] snd_sof_amd_acp70 0000:c4:00.5: fw_state: SOF_FW_BOOT_IN_PROGRESS (3) [ 14.432610] snd_sof_amd_acp70 0000:c4:00.5: invalid header size 0x71c41000. FW oops is bogus [ 14.432626] snd_sof_amd_acp70 0000:c4:00.5: unexpected fault 0x71c40000 trace 0x71c40000 [ 14.432642] snd_sof_amd_acp70 0000:c4:00.5: ------------[ DSP dump end ]------------ [ 14.432657] snd_sof_amd_acp70 0000:c4:00.5: error: failed to boot DSP firmware -5 [ 14.432672] snd_sof_amd_acp70 0000:c4:00.5: fw_state change: 3 -> 4 [ 14.433260] dmic-codec dmic-codec: ASoC: Unregistered DAI 'dmic-hifi' [ 14.433319] snd_sof_amd_acp70 0000:c4:00.5: fw_state change: 4 -> 0 [ 14.433358] snd_sof_amd_acp70 0000:c4:00.5: error: sof_probe_work failed err: -5
Update correct register offset for DMA ch status register.
Fixes: bff3c2a4062d ("ASoC: SOF: amd: add support for acp7.0 based platform")
Signed-off-by: Venkata Prasad Potturu venkataprasad.potturu@amd.com --- sound/soc/sof/amd/acp.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/sof/amd/acp.c b/sound/soc/sof/amd/acp.c index ce10d128de25..f7814dadf3ba 100644 --- a/sound/soc/sof/amd/acp.c +++ b/sound/soc/sof/amd/acp.c @@ -342,11 +342,19 @@ int acp_dma_status(struct acp_dev_data *adata, unsigned char ch) { struct snd_sof_dev *sdev = adata->dev; unsigned int val; + unsigned int acp_dma_ch_sts; int ret = 0;
+ switch (adata->pci_rev) { + case ACP70_PCI_ID: + acp_dma_ch_sts = ACP70_DMA_CH_STS; + break; + default: + acp_dma_ch_sts = ACP_DMA_CH_STS; + } val = snd_sof_dsp_read(sdev, ACP_DSP_BAR, ACP_DMA_CNTL_0 + ch * sizeof(u32)); if (val & ACP_DMA_CH_RUN) { - ret = snd_sof_dsp_read_poll_timeout(sdev, ACP_DSP_BAR, ACP_DMA_CH_STS, val, !val, + ret = snd_sof_dsp_read_poll_timeout(sdev, ACP_DSP_BAR, acp_dma_ch_sts, val, !val, ACP_REG_POLL_INTERVAL, ACP_DMA_COMPLETE_TIMEOUT_US); if (ret < 0)