256FS sysclk gives the best audio quality per nau8825 datasheet.
Loud headphone pop happens if there is no sysclk during nau8825 playback power up sequence. Currently Skylake does not output MCLK/FS when the back-end DAI op hw_param is called, so we cannot switch to MCLK/FS in hw_param. This patch reduces pop by leting nau8825 keep using its internal VCO clock during widget power up sequence, until SNDRV_PCM_TRIGGER_START when MCLK/FS is available.
---
diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index 0f89602..6ad8f52 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -70,14 +70,7 @@ return -EIO; }
- if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -272,25 +265,7 @@ .startup = skl_fe_startup, };
-static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - int ret;
- ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); - - return ret; -} - -static struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, -};
static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_params *params) @@ -306,6 +281,33 @@ return 0; }
+static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + } + + return ret; +} + +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, +}; + static unsigned int channels_dmic[] = { 2, 4, };