On Fri, 28 Jul 2017, Richard Fitzgerald wrote:
This adds the generic core support for Cirrus Logic "Madera" class codecs. These are complex audio codec SoCs with a variety of digital and analogue I/O, onboard audio processing and DSPs, and other features.
These codecs are all based off a common set of hardware IP so can be supported by a core of common code (with a few minor device-to-device variations).
Signed-off-by: Charles Keepax ckeepax@opensource.wolfsonmicro.com Signed-off-by: Nikesh Oswal Nikesh.Oswal@wolfsonmicro.com Signed-off-by: Richard Fitzgerald rf@opensource.wolfsonmicro.com
Changes since V3:
- Fixed missing Kconfig dependency on PINCTRL
- commented purpose of madera_name_from_type(), call it earlier in probe and store the string in a member of struct madera
- removed the madera_get_num_micbias and madera_get_num_childbias exported functions and introduced static madera_set_micbias_info to init this information in members of struct madera
- adjusted the commenting on the switch that adds the LDO1 child driver
- squashed the two switches on hardware ID into one (we used to re-read the HWID after reset hence the second switch on it but as we don't do that now the two switches can be combined)
- pre-init ret to remove the else ret = 0 in madera_get_reset_gpio
Changes not made to V3 review comments:
- left the dev_dbg messages in runtime_suspend and runtime_resume, they are only _dbg and they've been useful in the past for debugging
MAINTAINERS | 3 + drivers/mfd/Kconfig | 27 ++ drivers/mfd/Makefile | 4 + drivers/mfd/madera-core.c | 611 +++++++++++++++++++++++++++++++++++++++ drivers/mfd/madera-i2c.c | 135 +++++++++ drivers/mfd/madera-spi.c | 135 +++++++++ drivers/mfd/madera.h | 54 ++++ include/linux/mfd/madera/core.h | 179 ++++++++++++ include/linux/mfd/madera/pdata.h | 61 ++++ 9 files changed, 1209 insertions(+) create mode 100644 drivers/mfd/madera-core.c create mode 100644 drivers/mfd/madera-i2c.c create mode 100644 drivers/mfd/madera-spi.c create mode 100644 drivers/mfd/madera.h create mode 100644 include/linux/mfd/madera/core.h create mode 100644 include/linux/mfd/madera/pdata.h
diff --git a/MAINTAINERS b/MAINTAINERS index f70d218..f335b2a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3376,7 +3376,10 @@ L: patches@opensource.wolfsonmicro.com T: git https://github.com/CirrusLogic/linux-drivers.git W: https://github.com/CirrusLogic/linux-drivers/wiki S: Supported +F: Documentation/devicetree/bindings/mfd/madera.txt F: include/linux/mfd/madera/* +F: drivers/mfd/madera* +F: drivers/mfd/cs47l*
CLEANCACHE API M: Konrad Rzeszutek Wilk konrad.wilk@oracle.com diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 94ad2c1..9ca7174 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -208,6 +208,33 @@ config MFD_CROS_EC_SPI response time cannot be guaranteed, we support ignoring 'pre-amble' bytes before the response actually starts.
+config MFD_MADERA
- bool
- select MFD_CORE
- select REGMAP
- select REGMAP_IRQ
- select MADERA_IRQ
+config MFD_MADERA_I2C
- bool "Cirrus Logic Madera codecs with I2C"
- select MFD_MADERA
- select REGMAP_I2C
- depends on I2C
- depends on PINCTRL
- help
Support for the Cirrus Logic Madera platform audio SoC
core functionality controlled via I2C.
+config MFD_MADERA_SPI
- bool "Cirrus Logic Madera codecs with SPI"
- select MFD_MADERA
- select REGMAP_SPI
- depends on SPI_MASTER
- depends on PINCTRL
- help
Support for the Cirrus Logic Madera platform audio SoC
core functionality controlled via SPI.
config MFD_ASIC3 bool "Compaq ASIC3" depends on GPIOLIB && ARM diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 080793b..71c658a 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -73,6 +73,10 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o obj-$(CONFIG_MFD_WM8994) += wm8994.o
+obj-$(CONFIG_MFD_MADERA) += madera-core.o +obj-$(CONFIG_MFD_MADERA_I2C) += madera-i2c.o +obj-$(CONFIG_MFD_MADERA_SPI) += madera-spi.o
obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c new file mode 100644 index 0000000..2d83a57 --- /dev/null +++ b/drivers/mfd/madera-core.c @@ -0,0 +1,611 @@ +/*
- Core MFD support for Cirrus Logic Madera codecs
- Copyright 2015-2017 Cirrus Logic
No author?
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/madera/core.h> +#include <linux/mfd/madera/registers.h>
+#include "madera.h"
+#define CS47L35_SILICON_ID 0x6360 +#define CS47L85_SILICON_ID 0x6338 +#define CS47L90_SILICON_ID 0x6364
+#define MADERA_32KZ_MCLK2 1
+static const char * const madera_core_supplies[] = {
- "AVDD",
- "DBVDD1",
+};
+static const struct mfd_cell madera_ldo1_devs[] = {
- { .name = "madera-ldo1" },
+};
+static const char * const cs47l35_supplies[] = {
- "MICVDD",
- "DBVDD2",
- "CPVDD1",
- "CPVDD2",
- "SPKVDD",
+};
+static const struct mfd_cell cs47l35_devs[] = {
- { .name = "madera-pinctrl", },
- { .name = "madera-irq", },
- { .name = "madera-micsupp", },
- { .name = "madera-gpio", },
- { .name = "madera-extcon", },
- {
.name = "cs47l35-codec",
.parent_supplies = cs47l35_supplies,
.num_parent_supplies = ARRAY_SIZE(cs47l35_supplies),
- },
+};
+static const char * const cs47l85_supplies[] = {
- "MICVDD",
- "DBVDD2",
- "DBVDD3",
- "DBVDD4",
- "CPVDD1",
- "CPVDD2",
- "SPKVDDL",
- "SPKVDDR",
+};
+static const struct mfd_cell cs47l85_devs[] = {
- { .name = "madera-pinctrl", },
- { .name = "madera-irq", },
- { .name = "madera-micsupp" },
- { .name = "madera-gpio", },
- { .name = "madera-extcon", },
- {
.name = "cs47l85-codec",
.parent_supplies = cs47l85_supplies,
.num_parent_supplies = ARRAY_SIZE(cs47l85_supplies),
- },
+};
+static const char * const cs47l90_supplies[] = {
- "MICVDD",
- "DBVDD2",
- "DBVDD3",
- "DBVDD4",
- "CPVDD1",
- "CPVDD2",
+};
+static const struct mfd_cell cs47l90_devs[] = {
- { .name = "madera-pinctrl", },
- { .name = "madera-irq", },
- { .name = "madera-micsupp", },
- { .name = "madera-gpio", },
- { .name = "madera-extcon", },
- {
.name = "cs47l90-codec",
.parent_supplies = cs47l90_supplies,
.num_parent_supplies = ARRAY_SIZE(cs47l90_supplies),
- },
+};
+/* Used by madera-i2c and madera-spi drivers */ +const char *madera_name_from_type(enum madera_type type) +{
- switch (type) {
- case CS47L35:
return "CS47L35";
- case CS47L85:
return "CS47L85";
- case CS47L90:
return "CS47L90";
- case CS47L91:
return "CS47L91";
- case WM1840:
return "WM1840";
- default:
return "Unknown";
- }
+} +EXPORT_SYMBOL_GPL(madera_name_from_type);
+#define MADERA_BOOT_POLL_MAX_INTERVAL_US 5000 +#define MADERA_BOOT_POLL_TIMEOUT_US 25000
+static int madera_wait_for_boot(struct madera *madera) +{
- unsigned int val;
- int ret;
- /*
* We can't use an interrupt as we need to runtime resume to do so,
* so we poll the status bit. This won't race with the interrupt
* handler because it will be blocked on runtime resume.
*/
- ret = regmap_read_poll_timeout(madera->regmap,
MADERA_IRQ1_RAW_STATUS_1,
val,
(val & MADERA_BOOT_DONE_STS1),
MADERA_BOOT_POLL_MAX_INTERVAL_US,
MADERA_BOOT_POLL_TIMEOUT_US);
- if (ret)
dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
- /*
* BOOT_DONE defaults to unmasked on boot so we must ack it.
* Do this unconditionally to avoid interrupt storms
*/
- regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
MADERA_BOOT_DONE_EINT1);
- pm_runtime_mark_last_busy(madera->dev);
- return ret;
+}
+static int madera_soft_reset(struct madera *madera) +{
- int ret;
- ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
- if (ret != 0) {
dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
return ret;
- }
- /* Allow time for internal clocks to startup after reset */
- usleep_range(1000, 2000);
- return 0;
+}
+static void madera_enable_hard_reset(struct madera *madera) +{
- if (madera->reset_gpio)
gpiod_set_value_cansleep(madera->reset_gpio, 0);
+}
+static void madera_disable_hard_reset(struct madera *madera) +{
- if (madera->reset_gpio) {
gpiod_set_value_cansleep(madera->reset_gpio, 1);
usleep_range(1000, 2000);
- }
+}
+#ifdef CONFIG_PM +static int madera_runtime_resume(struct device *dev) +{
- struct madera *madera = dev_get_drvdata(dev);
- int ret;
- dev_dbg(dev, "Leaving sleep mode\n");
- ret = regulator_enable(madera->dcvdd);
- if (ret) {
dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
return ret;
- }
- regcache_cache_only(madera->regmap, false);
- regcache_cache_only(madera->regmap_32bit, false);
- ret = madera_wait_for_boot(madera);
- if (ret)
goto err;
- ret = regcache_sync(madera->regmap);
- if (ret) {
dev_err(dev, "Failed to restore 16-bit register cache\n");
goto err;
- }
- ret = regcache_sync(madera->regmap_32bit);
- if (ret) {
dev_err(dev, "Failed to restore 32-bit register cache\n");
goto err;
- }
- return 0;
+err:
- regcache_cache_only(madera->regmap_32bit, true);
- regcache_cache_only(madera->regmap, true);
- regulator_disable(madera->dcvdd);
- return ret;
+}
+static int madera_runtime_suspend(struct device *dev) +{
- struct madera *madera = dev_get_drvdata(dev);
- dev_dbg(madera->dev, "Entering sleep mode\n");
- regcache_cache_only(madera->regmap, true);
- regcache_mark_dirty(madera->regmap);
- regcache_cache_only(madera->regmap_32bit, true);
- regcache_mark_dirty(madera->regmap_32bit);
- regulator_disable(madera->dcvdd);
- return 0;
+} +#endif
+const struct dev_pm_ops madera_pm_ops = {
- SET_RUNTIME_PM_OPS(madera_runtime_suspend,
madera_runtime_resume,
NULL)
+}; +EXPORT_SYMBOL_GPL(madera_pm_ops);
+#ifdef CONFIG_OF +const struct of_device_id madera_of_match[] = {
- { .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
- { .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
- { .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
- { .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
- { .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
- {},
+}; +EXPORT_SYMBOL_GPL(madera_of_match);
+unsigned long madera_get_type_from_of(struct device *dev) +{
- const struct of_device_id *id = of_match_device(madera_of_match, dev);
- if (id)
return (unsigned long)id->data;
- else
return 0;
+} +EXPORT_SYMBOL_GPL(madera_get_type_from_of);
I think this costs more lines than it saves.
Just do this in both the I2C and SPI files.
+#endif
+static int madera_get_reset_gpio(struct madera *madera) +{
- int ret = 0;
- /* We use 0 in pdata to indicate a GPIO has not been set */
- if (dev_get_platdata(madera->dev) && (madera->pdata.reset > 0)) {
/* Start out with /RESET asserted */
ret = devm_gpio_request_one(madera->dev,
madera->pdata.reset,
GPIOF_DIR_OUT | GPIOF_INIT_LOW,
"madera reset");
if (!ret)
madera->reset_gpio = gpio_to_desc(madera->pdata.reset);
- } else {
madera->reset_gpio = devm_gpiod_get_optional(madera->dev,
"reset",
GPIOD_OUT_LOW);
if (IS_ERR(madera->reset_gpio))
ret = PTR_ERR(madera->reset_gpio);
- }
- if (ret == -EPROBE_DEFER)
return ret;
- if (ret) {
dev_err(madera->dev, "Failed to request /RESET: %d\n", ret);
return ret;
- }
- if (!madera->reset_gpio)
dev_warn(madera->dev,
"Running without reset GPIO is not recommended\n");
- return 0;
+}
+static void madera_set_micbias_info(struct madera *madera) +{
- /*
* childbias is an array because future codecs can have different
* childbiases for each micbias
*/
- switch (madera->type) {
- case CS47L35:
madera->num_micbias = 2;
madera->num_childbias[0] = 2;
madera->num_childbias[1] = 2;
return;
- case CS47L85:
- case WM1840:
madera->num_micbias = 4;
return;
- case CS47L90:
- case CS47L91:
madera->num_micbias = 2;
madera->num_childbias[0] = 4;
madera->num_childbias[1] = 4;
return;
- default:
return;
- }
+}
+int madera_dev_init(struct madera *madera) +{
- struct device *dev = madera->dev;
- unsigned int hwid;
- int (*patch_fn)(struct madera *) = NULL;
- const struct mfd_cell *mfd_devs;
- int n_devs = 0;
- int i, ret;
- dev_set_drvdata(madera->dev, madera);
- BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
- madera_set_micbias_info(madera);
- if (dev_get_platdata(madera->dev)) {
memcpy(&madera->pdata, dev_get_platdata(madera->dev),
sizeof(madera->pdata));
- }
- ret = madera_get_reset_gpio(madera);
- if (ret)
return ret;
- regcache_cache_only(madera->regmap, true);
- regcache_cache_only(madera->regmap_32bit, true);
- for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
madera->core_supplies[i].supply = madera_core_supplies[i];
- madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
- /*
* On some codecs DCVDD could be supplied by the internal LDO1.
* For those we must add the LDO1 driver before requesting DCVDD
*/
- switch (madera->type) {
- case CS47L35:
- case CS47L90:
- case CS47L91:
break;
- case CS47L85:
- case WM1840:
ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
madera_ldo1_devs,
ARRAY_SIZE(madera_ldo1_devs),
NULL, 0, NULL);
if (ret) {
dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
return ret;
}
break;
- default:
/* no point continuing if the type is unknown */
Nit: s/no/No/
dev_err(madera->dev, "Unknown device type %d\n", madera->type);
return -ENODEV;
- }
- ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
madera->core_supplies);
- if (ret) {
dev_err(dev, "Failed to request core supplies: %d\n", ret);
goto err_devs;
- }
- /*
* Don't use devres here because the only device we have to get
* against is the MFD device and DCVDD will likely be supplied by
* one of its children. Meaning that the regulator will be
* destroyed by the time devres calls regulator put.
*/
- madera->dcvdd = regulator_get_exclusive(madera->dev, "DCVDD");
- if (IS_ERR(madera->dcvdd)) {
ret = PTR_ERR(madera->dcvdd);
dev_err(dev, "Failed to request DCVDD: %d\n", ret);
goto err_devs;
- }
- ret = regulator_bulk_enable(madera->num_core_supplies,
madera->core_supplies);
- if (ret) {
dev_err(dev, "Failed to enable core supplies: %d\n", ret);
goto err_dcvdd;
- }
- ret = regulator_enable(madera->dcvdd);
- if (ret) {
dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
goto err_enable;
- }
- madera_disable_hard_reset(madera);
- regcache_cache_only(madera->regmap, false);
- regcache_cache_only(madera->regmap_32bit, false);
- /*
* Verify that this is a chip we know about before we
* starting doing any writes to its registers
*/
- ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
- if (ret) {
dev_err(dev, "Failed to read ID register: %d\n", ret);
goto err_reset;
- }
- switch (hwid) {
- case CS47L35_SILICON_ID:
if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
switch (madera->type) {
case CS47L35:
patch_fn = cs47l35_patch;
mfd_devs = cs47l35_devs;
n_devs = ARRAY_SIZE(cs47l35_devs);
break;
default:
break;
}
}
break;
- case CS47L85_SILICON_ID:
if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
switch (madera->type) {
case CS47L85:
case WM1840:
patch_fn = cs47l85_patch;
mfd_devs = cs47l85_devs;
n_devs = ARRAY_SIZE(cs47l85_devs);
break;
default:
break;
}
}
break;
- case CS47L90_SILICON_ID:
if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
switch (madera->type) {
case CS47L90:
case CS47L91:
patch_fn = cs47l90_patch;
mfd_devs = cs47l90_devs;
n_devs = ARRAY_SIZE(cs47l90_devs);
break;
default:
break;
}
}
break;
- default:
dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
ret = -EINVAL;
goto err_reset;
- }
- if (!n_devs) {
dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid,
madera->type_name);
ret = -ENODEV;
goto err_reset;
- }
- /*
* It looks like a device we support. If we don't have a hard reset
* we can now attempt a soft reset
*/
- if (!madera->reset_gpio) {
ret = madera_soft_reset(madera);
if (ret)
goto err_reset;
- }
- ret = madera_wait_for_boot(madera);
- if (ret) {
dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
goto err_reset;
- }
- ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
&madera->rev);
- if (ret) {
dev_err(dev, "Failed to read revision register: %d\n", ret);
goto err_reset;
- }
- madera->rev &= MADERA_HW_REVISION_MASK;
- dev_info(dev, "%s silicon revision %d\n", madera->type_name,
madera->rev);
- /* Apply hardware patch */
- if (patch_fn) {
ret = patch_fn(madera);
if (ret) {
dev_err(madera->dev, "Failed to apply patch %d\n", ret);
goto err_reset;
}
- }
- /* Init 32k clock sourced from MCLK2 */
- ret = regmap_update_bits(madera->regmap,
MADERA_CLOCK_32K_1,
MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
- if (ret) {
dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
goto err_reset;
- }
- pm_runtime_set_active(madera->dev);
- pm_runtime_enable(madera->dev);
- pm_runtime_set_autosuspend_delay(madera->dev, 100);
- pm_runtime_use_autosuspend(madera->dev);
- ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
mfd_devs, n_devs,
NULL, 0, NULL);
- if (ret) {
dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
goto err_pm_runtime;
- }
- return 0;
+err_pm_runtime:
- pm_runtime_disable(madera->dev);
+err_reset:
- madera_enable_hard_reset(madera);
- regulator_disable(madera->dcvdd);
+err_enable:
- regulator_bulk_disable(madera->num_core_supplies,
madera->core_supplies);
+err_dcvdd:
- regulator_put(madera->dcvdd);
+err_devs:
- mfd_remove_devices(dev);
- return ret;
+} +EXPORT_SYMBOL_GPL(madera_dev_init);
+int madera_dev_exit(struct madera *madera) +{
- /* Prevent any IRQs being serviced while we clean up */
- disable_irq(madera->irq);
- /*
* DCVDD could be supplied by a child node, we must disable it before
* removing the children, and prevent PM runtime from turning it back on
*/
- pm_runtime_disable(madera->dev);
- regulator_disable(madera->dcvdd);
- regulator_put(madera->dcvdd);
- mfd_remove_devices(madera->dev);
- madera_enable_hard_reset(madera);
- regulator_bulk_disable(madera->num_core_supplies,
madera->core_supplies);
- return 0;
+} +EXPORT_SYMBOL_GPL(madera_dev_exit); diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c new file mode 100644 index 0000000..80c2304 --- /dev/null +++ b/drivers/mfd/madera-i2c.c @@ -0,0 +1,135 @@ +/*
- I2C bus interface to Cirrus Logic Madera codecs
- Copyright 2015-2017 Cirrus Logic
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/device.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/of.h>
Nit: Alphabetical.
+#include <linux/mfd/madera/core.h>
+#include "madera.h"
+static int madera_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
+{
- struct madera *madera;
- const struct regmap_config *regmap_16bit_config = NULL;
- const struct regmap_config *regmap_32bit_config = NULL;
- unsigned long type;
- const char *name;
- int ret;
- if (i2c->dev.of_node)
type = madera_get_type_from_of(&i2c->dev);
- else
type = id->driver_data;
- switch (type) {
- case CS47L35:
if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
}
break;
- case CS47L85:
- case WM1840:
if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
}
break;
- case CS47L90:
- case CS47L91:
if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
}
break;
- default:
dev_err(&i2c->dev,
"Unknown Madera I2C device type %ld\n", type);
return -EINVAL;
- }
- name = madera_name_from_type(type);
- if (!regmap_16bit_config) {
dev_err(&i2c->dev,
"Kernel does not include support for %s\n", name);
return -EINVAL;
- }
- madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
- if (!madera)
return -ENOMEM;
- madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
- if (IS_ERR(madera->regmap)) {
ret = PTR_ERR(madera->regmap);
dev_err(&i2c->dev,
"Failed to allocate 16-bit register map: %d\n", ret);
return ret;
- }
- madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
- if (IS_ERR(madera->regmap_32bit)) {
ret = PTR_ERR(madera->regmap_32bit);
dev_err(&i2c->dev,
"Failed to allocate 32-bit register map: %d\n", ret);
return ret;
- }
- madera->type = type;
- madera->type_name = name;
- madera->dev = &i2c->dev;
- madera->irq = i2c->irq;
- return madera_dev_init(madera);
+}
+static int madera_i2c_remove(struct i2c_client *i2c) +{
- struct madera *madera = dev_get_drvdata(&i2c->dev);
- madera_dev_exit(madera);
- return 0;
+}
+static const struct i2c_device_id madera_i2c_id[] = {
- { "cs47l35", CS47L35 },
- { "cs47l85", CS47L85 },
- { "cs47l90", CS47L90 },
- { "cs47l91", CS47L91 },
- { "wm1840", WM1840 },
- { }
+}; +MODULE_DEVICE_TABLE(i2c, madera_i2c_id);
+static struct i2c_driver madera_i2c_driver = {
- .driver = {
.name = "madera",
.pm = &madera_pm_ops,
.of_match_table = of_match_ptr(madera_of_match),
- },
- .probe = madera_i2c_probe,
- .remove = madera_i2c_remove,
- .id_table = madera_i2c_id,
+};
+module_i2c_driver(madera_i2c_driver);
+MODULE_DESCRIPTION("Madera I2C bus interface"); +MODULE_AUTHOR("Richard Fitzgerald rf@opensource.wolfsonmicro.com"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/madera-spi.c b/drivers/mfd/madera-spi.c new file mode 100644 index 0000000..1252c59 --- /dev/null +++ b/drivers/mfd/madera-spi.c @@ -0,0 +1,135 @@ +/*
- SPI bus interface to Cirrus Logic Madera codecs
- Copyright 2015-2017 Cirrus Logic
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#include <linux/device.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/spi/spi.h>
Nit: Alphabetical.
+#include <linux/mfd/madera/core.h>
+#include "madera.h"
+static int madera_spi_probe(struct spi_device *spi) +{
- const struct spi_device_id *id = spi_get_device_id(spi);
- struct madera *madera;
- const struct regmap_config *regmap_16bit_config = NULL;
- const struct regmap_config *regmap_32bit_config = NULL;
- unsigned long type;
- const char *name;
- int ret;
- if (spi->dev.of_node)
type = madera_get_type_from_of(&spi->dev);
- else
type = id->driver_data;
- switch (type) {
- case CS47L35:
if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
regmap_16bit_config = &cs47l35_16bit_spi_regmap;
regmap_32bit_config = &cs47l35_32bit_spi_regmap;
}
break;
- case CS47L85:
- case WM1840:
if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
regmap_16bit_config = &cs47l85_16bit_spi_regmap;
regmap_32bit_config = &cs47l85_32bit_spi_regmap;
}
break;
- case CS47L90:
- case CS47L91:
if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
regmap_16bit_config = &cs47l90_16bit_spi_regmap;
regmap_32bit_config = &cs47l90_32bit_spi_regmap;
}
break;
- default:
dev_err(&spi->dev,
"Unknown Madera SPI device type %ld\n", type);
return -EINVAL;
- }
- name = madera_name_from_type(type);
- if (!regmap_16bit_config) {
dev_err(&spi->dev,
"Kernel does not include support for %s\n", name);
return -EINVAL;
- }
- madera = devm_kzalloc(&spi->dev, sizeof(*madera), GFP_KERNEL);
- if (!madera)
return -ENOMEM;
- madera->regmap = devm_regmap_init_spi(spi, regmap_16bit_config);
- if (IS_ERR(madera->regmap)) {
ret = PTR_ERR(madera->regmap);
dev_err(&spi->dev,
"Failed to allocate 16-bit register map: %d\n", ret);
return ret;
- }
- madera->regmap_32bit = devm_regmap_init_spi(spi, regmap_32bit_config);
- if (IS_ERR(madera->regmap_32bit)) {
ret = PTR_ERR(madera->regmap_32bit);
dev_err(&spi->dev,
"Failed to allocate 32-bit register map: %d\n", ret);
return ret;
- }
- madera->type = type;
- madera->type_name = name;
- madera->dev = &spi->dev;
- madera->irq = spi->irq;
- return madera_dev_init(madera);
+}
+static int madera_spi_remove(struct spi_device *spi) +{
- struct madera *madera = spi_get_drvdata(spi);
- madera_dev_exit(madera);
- return 0;
+}
+static const struct spi_device_id madera_spi_ids[] = {
- { "cs47l35", CS47L35 },
- { "cs47l85", CS47L85 },
- { "cs47l90", CS47L90 },
- { "cs47l91", CS47L91 },
- { "wm1840", WM1840 },
- { },
+}; +MODULE_DEVICE_TABLE(spi, madera_spi_ids);
+static struct spi_driver madera_spi_driver = {
- .driver = {
.name = "madera",
.owner = THIS_MODULE,
Is this required for SPI still?
.pm = &madera_pm_ops,
.of_match_table = of_match_ptr(madera_of_match),
- },
- .probe = madera_spi_probe,
- .remove = madera_spi_remove,
- .id_table = madera_spi_ids,
+};
+module_spi_driver(madera_spi_driver);
+MODULE_DESCRIPTION("Madera SPI bus interface"); +MODULE_AUTHOR("Richard Fitzgerald rf@opensource.wolfsonmicro.com"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/madera.h b/drivers/mfd/madera.h new file mode 100644 index 0000000..645cba7 --- /dev/null +++ b/drivers/mfd/madera.h @@ -0,0 +1,54 @@ +/*
- MFD internals for Cirrus Logic Madera codecs
- Copyright 2015-2017 Cirrus Logic
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#ifndef MADERA_MFD_H +#define MADERA_MFD_H
+#include <linux/of.h> +#include <linux/pm.h>
+struct madera;
+extern const struct dev_pm_ops madera_pm_ops; +extern const struct of_device_id madera_of_match[];
+int madera_dev_init(struct madera *madera); +int madera_dev_exit(struct madera *madera);
+#ifdef CONFIG_OF +unsigned long madera_get_type_from_of(struct device *dev); +#else +static inline unsigned long madera_get_type_from_of(struct device *dev) +{
- return 0;
+} +#endif
Remove this, I don't think it add much (anything?)
+const char *madera_name_from_type(enum madera_type type);
+extern const struct regmap_config cs47l35_16bit_spi_regmap; +extern const struct regmap_config cs47l35_32bit_spi_regmap; +extern const struct regmap_config cs47l35_16bit_i2c_regmap; +extern const struct regmap_config cs47l35_32bit_i2c_regmap; +int cs47l35_patch(struct madera *madera);
+extern const struct regmap_config cs47l85_16bit_spi_regmap; +extern const struct regmap_config cs47l85_32bit_spi_regmap; +extern const struct regmap_config cs47l85_16bit_i2c_regmap; +extern const struct regmap_config cs47l85_32bit_i2c_regmap; +int cs47l85_patch(struct madera *madera);
+extern const struct regmap_config cs47l90_16bit_spi_regmap; +extern const struct regmap_config cs47l90_32bit_spi_regmap; +extern const struct regmap_config cs47l90_16bit_i2c_regmap; +extern const struct regmap_config cs47l90_32bit_i2c_regmap; +int cs47l90_patch(struct madera *madera);
+#endif diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h new file mode 100644 index 0000000..21ac543 --- /dev/null +++ b/include/linux/mfd/madera/core.h @@ -0,0 +1,179 @@ +/*
- MFD internals for Cirrus Logic Madera codecs
- Copyright 2015-2017 Cirrus Logic
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#ifndef MADERA_CORE_H +#define MADERA_CORE_H
+#include <linux/interrupt.h> +#include <linux/notifier.h> +#include <linux/regmap.h> +#include <linux/gpio/consumer.h> +#include <linux/irqchip/irq-madera.h> +#include <linux/mfd/madera/pdata.h> +#include <linux/regulator/consumer.h> +#include <sound/madera-pdata.h>
Nit: Alphabetical.
+enum madera_type {
- CS47L35 = 1,
- CS47L85 = 2,
- CS47L90 = 3,
- CS47L91 = 4,
- WM1840 = 7,
+};
+#define MADERA_MAX_CORE_SUPPLIES 2 +#define MADERA_MAX_GPIOS 40
+#define CS47L35_NUM_GPIOS 16 +#define CS47L85_NUM_GPIOS 40 +#define CS47L90_NUM_GPIOS 38
+#define MADERA_MAX_MICBIAS 4
+/* Notifier events */ +#define MADERA_NOTIFY_VOICE_TRIGGER 0x1 +#define MADERA_NOTIFY_HPDET 0x2 +#define MADERA_NOTIFY_MICDET 0x4
+/* GPIO Function Definitions */ +#define MADERA_GP_FN_ALTERNATE 0x00 +#define MADERA_GP_FN_GPIO 0x01 +#define MADERA_GP_FN_DSP_GPIO 0x02 +#define MADERA_GP_FN_IRQ1 0x03 +#define MADERA_GP_FN_IRQ2 0x04 +#define MADERA_GP_FN_FLL1_CLOCK 0x10 +#define MADERA_GP_FN_FLL2_CLOCK 0x11 +#define MADERA_GP_FN_FLL3_CLOCK 0x12 +#define MADERA_GP_FN_FLLAO_CLOCK 0x13 +#define MADERA_GP_FN_FLL1_LOCK 0x18 +#define MADERA_GP_FN_FLL2_LOCK 0x19 +#define MADERA_GP_FN_FLL3_LOCK 0x1A +#define MADERA_GP_FN_FLLAO_LOCK 0x1B +#define MADERA_GP_FN_OPCLK_OUT 0x40 +#define MADERA_GP_FN_OPCLK_ASYNC_OUT 0x41 +#define MADERA_GP_FN_PWM1 0x48 +#define MADERA_GP_FN_PWM2 0x49 +#define MADERA_GP_FN_SPDIF_OUT 0x4C +#define MADERA_GP_FN_HEADPHONE_DET 0x50 +#define MADERA_GP_FN_MIC_DET 0x58 +#define MADERA_GP_FN_DRC1_SIGNAL_DETECT 0x80 +#define MADERA_GP_FN_DRC2_SIGNAL_DETECT 0x81 +#define MADERA_GP_FN_ASRC1_IN1_LOCK 0x88 +#define MADERA_GP_FN_ASRC1_IN2_LOCK 0x89 +#define MADERA_GP_FN_ASRC2_IN1_LOCK 0x8A +#define MADERA_GP_FN_ASRC2_IN2_LOCK 0x8B +#define MADERA_GP_FN_DSP_IRQ1 0xA0 +#define MADERA_GP_FN_DSP_IRQ2 0xA1 +#define MADERA_GP_FN_DSP_IRQ3 0xA2 +#define MADERA_GP_FN_DSP_IRQ4 0xA3 +#define MADERA_GP_FN_DSP_IRQ5 0xA4 +#define MADERA_GP_FN_DSP_IRQ6 0xA5 +#define MADERA_GP_FN_DSP_IRQ7 0xA6 +#define MADERA_GP_FN_DSP_IRQ8 0xA7 +#define MADERA_GP_FN_DSP_IRQ9 0xA8 +#define MADERA_GP_FN_DSP_IRQ10 0xA9 +#define MADERA_GP_FN_DSP_IRQ11 0xAA +#define MADERA_GP_FN_DSP_IRQ12 0xAB +#define MADERA_GP_FN_DSP_IRQ13 0xAC +#define MADERA_GP_FN_DSP_IRQ14 0xAD +#define MADERA_GP_FN_DSP_IRQ15 0xAE +#define MADERA_GP_FN_DSP_IRQ16 0xAF +#define MADERA_GP_FN_HPOUT1L_SC 0xB0 +#define MADERA_GP_FN_HPOUT1R_SC 0xB1 +#define MADERA_GP_FN_HPOUT2L_SC 0xB2 +#define MADERA_GP_FN_HPOUT2R_SC 0xB3 +#define MADERA_GP_FN_HPOUT3L_SC 0xB4 +#define MADERA_GP_FN_HPOUT4R_SC 0xB5 +#define MADERA_GP_FN_SPKOUTL_SC 0xB6 +#define MADERA_GP_FN_SPKOUTR_SC 0xB7 +#define MADERA_GP_FN_HPOUT1L_ENA 0xC0 +#define MADERA_GP_FN_HPOUT1R_ENA 0xC1 +#define MADERA_GP_FN_HPOUT2L_ENA 0xC2 +#define MADERA_GP_FN_HPOUT2R_ENA 0xC3 +#define MADERA_GP_FN_HPOUT3L_ENA 0xC4 +#define MADERA_GP_FN_HPOUT4R_ENA 0xC5 +#define MADERA_GP_FN_SPKOUTL_ENA 0xC6 +#define MADERA_GP_FN_SPKOUTR_ENA 0xC7 +#define MADERA_GP_FN_HPOUT1L_DIS 0xD0 +#define MADERA_GP_FN_HPOUT1R_DIS 0xD1 +#define MADERA_GP_FN_HPOUT2L_DIS 0xD2 +#define MADERA_GP_FN_HPOUT2R_DIS 0xD3 +#define MADERA_GP_FN_HPOUT3L_DIS 0xD4 +#define MADERA_GP_FN_HPOUT4R_DIS 0xD5 +#define MADERA_GP_FN_SPKOUTL_DIS 0xD6 +#define MADERA_GP_FN_SPKOUTR_DIS 0xD7 +#define MADERA_GP_FN_SPK_SHUTDOWN 0xE0 +#define MADERA_GP_FN_SPK_OVH_SHUTDOWN 0xE1 +#define MADERA_GP_FN_SPK_OVH_WARN 0xE2 +#define MADERA_GP_FN_TIMER1_STATUS 0x140 +#define MADERA_GP_FN_TIMER2_STATUS 0x141 +#define MADERA_GP_FN_TIMER3_STATUS 0x142 +#define MADERA_GP_FN_TIMER4_STATUS 0x143 +#define MADERA_GP_FN_TIMER5_STATUS 0x144 +#define MADERA_GP_FN_TIMER6_STATUS 0x145 +#define MADERA_GP_FN_TIMER7_STATUS 0x146 +#define MADERA_GP_FN_TIMER8_STATUS 0x147 +#define MADERA_GP_FN_EVENTLOG1_FIFO_STS 0x150 +#define MADERA_GP_FN_EVENTLOG2_FIFO_STS 0x151 +#define MADERA_GP_FN_EVENTLOG3_FIFO_STS 0x152 +#define MADERA_GP_FN_EVENTLOG4_FIFO_STS 0x153 +#define MADERA_GP_FN_EVENTLOG5_FIFO_STS 0x154 +#define MADERA_GP_FN_EVENTLOG6_FIFO_STS 0x155 +#define MADERA_GP_FN_EVENTLOG7_FIFO_STS 0x156 +#define MADERA_GP_FN_EVENTLOG8_FIFO_STS 0x157
+struct snd_soc_dapm_context;
+/*
- struct madera
- This should not be used by anything except child drivers of the Madera MFD
- */
+struct madera {
- struct regmap *regmap;
- struct regmap *regmap_32bit;
- struct device *dev;
- enum madera_type type;
- unsigned int rev;
- const char *type_name;
- struct gpio_desc *reset_gpio;
- int num_core_supplies;
- struct regulator_bulk_data core_supplies[MADERA_MAX_CORE_SUPPLIES];
- struct regulator *dcvdd;
- bool internal_dcvdd;
- struct madera_pdata pdata;
- struct device *irq_dev;
- int irq;
- unsigned int out_clamp[MADERA_MAX_OUTPUT];
- unsigned int out_shorted[MADERA_MAX_OUTPUT];
- unsigned int hp_ena;
- unsigned int num_micbias;
- unsigned int num_childbias[MADERA_MAX_MICBIAS];
- struct snd_soc_dapm_context *dapm;
- struct blocking_notifier_head notifier;
+};
I think this deserves a kerneldoc header.
+static inline int madera_call_notifiers(struct madera *madera,
unsigned long event,
void *data)
+{
- return blocking_notifier_call_chain(&madera->notifier, event, data);
+} +#endif
Where is this called from?
diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h new file mode 100644 index 0000000..b3af47c --- /dev/null +++ b/include/linux/mfd/madera/pdata.h @@ -0,0 +1,61 @@ +/*
- Platform data for Cirrus Logic Madera codecs
- Copyright 2015-2017 Cirrus Logic
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation.
- */
+#ifndef MADERA_PDATA_H +#define MADERA_PDATA_H
+#include <linux/kernel.h> +#include <linux/irqchip/irq-madera-pdata.h> +#include <linux/regulator/arizona-ldo1.h> +#include <linux/regulator/arizona-micsupp.h> +#include <linux/regulator/machine.h> +#include <sound/madera-pdata.h>
Guess what?
+#define MADERA_MAX_MICBIAS 4 +#define MADERA_MAX_CHILD_MICBIAS 4
+#define MADERA_MAX_GPSW 2
+struct pinctrl_map;
+/**
- struct madera_pdata - Configuration data for Madera devices
- @reset: GPIO controlling /RESET (0 = none)
- @ldo1: Substruct of pdata for the LDO1 regulator
- @micvdd: Substruct of pdata for the MICVDD regulator
- @irqchip: Substruct of pdata for the irqchip driver
- @gpio_base: Base GPIO number
- @gpio_configs: Array of GPIO configurations (See Documentation/pinctrl.txt)
- @n_gpio_configs: Number of entries in gpio_configs
- @codec: Substructure of pdata for the ASoC codec driver
See include/sound/madera-pdata.h
- @gpsw: General purpose switch mode setting (See the SW1_MODE field
in the datasheet for the available values for your codec)
- */
+struct madera_pdata {
- int reset;
- struct arizona_ldo1_pdata ldo1;
- struct arizona_micsupp_pdata micvdd;
- struct madera_irqchip_pdata irqchip;
- int gpio_base;
- const struct pinctrl_map *gpio_configs;
- int n_gpio_configs;
- struct madera_codec_pdata codec;
- u32 gpsw[MADERA_MAX_GPSW];
+};
+#endif
Once you fixed all of my comments, please apply my:
For my own reference: Acked-for-MFD-by: Lee Jones lee.jones@linaro.org