EASRC (Enhanced Asynchronous Sample Rate Converter) is a new IP module found on i.MX8MN.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- .../devicetree/bindings/sound/fsl,easrc.txt | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.txt
diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.txt b/Documentation/devicetree/bindings/sound/fsl,easrc.txt new file mode 100644 index 000000000000..0e8153165e3b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.txt @@ -0,0 +1,57 @@ +NXP Asynchronous Sample Rate Converter (ASRC) Controller + +The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a +signal associated with an input clock into a signal associated with a different +output clock. The driver currently works as a Front End of DPCM with other Back +Ends Audio controller such as ESAI, SSI and SAI. It has four context to support +four substreams within totally 32 channels. + +Required properties: +- compatible: Contains "fsl,imx8mn-easrc". + +- reg: Offset and length of the register set for the + device. + +- interrupts: Contains the asrc interrupt. + +- dmas: Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + +- dma-names: Contains "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx". + +- clocks: Contains an entry for each entry in clock-names. + +- clock-names: "mem" - Peripheral clock to driver module. + +- fsl,easrc-ram-script-name: The coefficient table for the filters + +- fsl,asrc-rate: Defines a mutual sample rate used by DPCM Back + Ends. + +- fsl,asrc-width: Defines a mutual sample width used by DPCM Back + Ends. + +Example: + +easrc: easrc@300C0000 { + compatible = "fsl,imx8mn-easrc"; + reg = <0x0 0x300C0000 0x0 0x10000>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; + clock-names = "mem"; + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, + <&sdma2 18 23 0> , <&sdma2 19 23 0>, + <&sdma2 20 23 0> , <&sdma2 21 23 0>, + <&sdma2 22 23 0> , <&sdma2 23 23 0>; + dma-names = "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx"; + fsl,easrc-ram-script-name = "imx/easrc/easrc-imx8mn.bin"; + fsl,asrc-rate = <8000>; + fsl,asrc-width = <16>; + status = "disabled"; +};