On 3/22/19 6:39 PM, Guenter Roeck wrote:
If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume.
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe
In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem.
max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1
The problem is similar to the problem solved with commit 2fc995a87f2e ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem.
Makes sense
Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
I'd like to highlight that there is a fundamental flaw in the way the machine drivers are handled. Since we don't have a hook for the machine driver in the BIOS, the DSP driver creates a platform_device which will instantiate the machine driver. When errors happen in the machine driver probe, they are suppressed due to a 'feature' of the device model, so you can end-up with a broken configuration that is still reported as a successful strobe.
Cc: stable@vger.kernel.org Cc: Jarkko Nikula jarkko.nikula@linux.intel.com Cc: Curtis Malainey cujomalainey@chromium.org Signed-off-by: Guenter Roeck linux@roeck-us.net
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c index 08cea5b5cda9..0e8b1c5eec88 100644 --- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c +++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c @@ -706,9 +706,17 @@ static int sst_soc_probe(struct snd_soc_component *component) return sst_dsp_init_v2_dpcm(component); }
+static void sst_soc_remove(struct snd_soc_component *component) +{
- struct sst_data *drv = dev_get_drvdata(component->dev);
- drv->soc_card = NULL;
+}
- static const struct snd_soc_component_driver sst_soc_platform_drv = { .name = DRV_NAME, .probe = sst_soc_probe,
- .remove = sst_soc_remove, .ops = &sst_platform_ops, .compr_ops = &sst_platform_compr_ops, .pcm_new = sst_pcm_new,