ok you can find attached my codec0 output data. I hope this helps. if
you or anyone else need any other piece of info, please ask.
----
Messaggio originale---- Apparently (I assume) this is not for all via
sound chips so it's best to expalin what your setup is. The output from lspci does not tell the story on the codec at times. The best output is
from /proc/asound/card0/codec#0
On Wed, 2010-05-19 at 11:33 +0200, mutenmaster@tiscali.it wrote:
hello people,
i am really
determined in letting you know, for the
third time, that my front
mic input does not work. i do not know if the
rear one works, i
suspect not, but it's not important, because
before the following
commit, the front mic input worked:
$ sudo git bisect bad
f5271101faf1655d862849f42518c2a88ef394fb
is the first bad commit
commit f5271101faf1655d862849f42518c2a88ef394fb
Author: Lydia
Wang
lydiawang@viatech.com.cn Date: Sat Oct 10 19:07: 35
2009 +0800
ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE
control type
Enter
low power state if AA-Path volume is
muted.
Signed-off-by:
Lydia Wang <lydiawang@viatech.
com.cn>
Signed-off-by: Logan Li loganli@viatech.com.cn
Signed-off-by:
Takashi Iwai <tiwai@suse. de>
:040000
040000
ab1ae14ff67f0b08848faeb3ad68def7f3e727f0
0bfbfde11fe32e87e8edbdb3c4d03c2d30370393 M sound
i'm
copypasting
the lspci ouput, so that you can have a general idea
of what kind of
machine i have. please let me know if there is
any other info you need
to solve this bug.
more details on
the problem:
doing $ arecord -f cd test.wav
produces a
file of 44 bytes. it's as if no microphone is
attached to the
jack. this behaviour has been evolving from the commit
i showed
you forth. at the beginning, a file with actual data was
produced, but no audio came out of the speakers when reproducing
it.
going on with the
commits, the file became 44 bytes long.
yours,
vasilis
--
$ lspci -vvv
00:00.0 Host
bridge: Advanced Micro Devices
[AMD] RS780 Host Bridge Alternate
Subsystem: ASUSTeK Computer Inc.
Device 83a2 Control: I/O- Mem+
BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx-
Status: Cap+
66MHz+ UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort+
SERR- <PERR- INTx-
Latency: 0
Capabilities:
[c4] HyperTransport:
Slave or Primary
Interface
Command:
BaseUnitID=0 UnitCnt=12 MastHost-
DefDir-
DUL-
Link Control 0:
CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit
DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control
1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
IsocEn- LSEn-
ExtCTL- 64b-
Link Config 1: MLWI=8bit
DwFcIn- MLWO=8bit
DwFcOut-
LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0:
<Prot- <Ovfl- <EOC- CTLTm-
Link
Frequency Capability 0: 200MHz+
300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+
1.0GHz+ 1.2GHz- 1.4GHz- 1.6
GHz- Vend-
Feature
Capability: IsocFC-
LDTSTOP+ CRCTM- ECTLT-
64bA- UIDRD-
Link
Frequency 1: 200MHz
Link
Error 1: <Prot-
<Ovfl- <EOC- CTLTm-
Link Frequency Capability 1:
200MHz-
300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz-
1.6
GHz- Vend-
Error Handling:
PFlE- OFlE- PFE- OFE- EOCFE- RFE-
CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge
Upper: 00-00
Bus Number: 00
Capabilities: [54]
HyperTransport: UnitID Clumping
Capabilities:
[40]
HyperTransport: Retry Mode
Capabilities: [9c]
HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c
00:02.0 PCI bridge: Advanced
Micro Devices [AMD] RS780 PCI to PCI
bridge (ext gfx port 0) (prog-if
00 [Normal decode]) Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF-
FastB2B- ParErr- DEVSEL=fast
TAbort- <TAbort- <MAbort-
SERR-
<PERR- INTx-
Latency: 0, Cache
Line Size: 64 bytes
Bus:
primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind
bridge: 0000d000-
0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable
memory behind bridge: 00000000d0000000- 00000000dfffffff
Secondary
status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl:
Parity+ SERR+ NoISA- VGA+ MAbort-
Reset- FastB2B-
PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power
Management version 3
Flags: PMEClk- DSI- D1-
D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+, D3cold+)
Status: D0 PME-
Enable- DSel=0
DScale=0 PME-
Capabilities: [58] Express (v2) Root Port
(Slot+),
MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
L0s
<64ns, L1 <1us
ExtTag+ RBE+ FLReset- DevCtl: Report errors:
Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag-
PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq
128
bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16,
ASPM L0s L1,
Latency L0 <64ns, L1 <1us
ClockPM- Suprise-
LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled-
Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt-
AutBWInt-
LnkSta: Speed 2.5
GT/s,
Width x16, TrErr- Train-
SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap:
AttnBtn- PwrCtrl-
MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2,
PowerLimit
75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn-
PwrFlt-
MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd
Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status:
AttnBtn-
PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
Changed:
MRL- PresDet+
LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID
0000,
PMEStatus- PMEPending-
DevCap2:
Completion Timeout: Not
Supported, TimeoutDis- ARIFwd-
DevCtl2:
Completion Timeout: 50us to
50ms, TimeoutDis- ARIFwd- LnkCtl2:
Target Link Speed: 5GT/s,
EnterCompliance- SpeedDis-, Selectable De-
emphasis: -3.5dB
Transmit
Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-
emphasis: -6dB
LnkSta2:
Current De-emphasis Level:
-3.5dB
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit-
Count=1/1 Enable+
Address:
fee0f00c Data: 4159
Capabilities:
[b0]
Subsystem: ASUSTeK
Computer Inc. Device 83a2
Capabilities:
[b8]
HyperTransport: MSI
Mapping Enable+ Fixed+
Capabilities:
[100] Vendor
Specific
Information <?>
Capabilities: [110]
Virtual Channel <?>
Kernel
driver in use: pcieport-driver
00:0a.0 PCI bridge: Advanced
Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) (prog-if 00
[Normal decode]) Control: I/O+
Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+
66MHz- UDF- FastB2B-
ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
SERR- <PERR- INTx-
Latency: 0, Cache Line
Size: 64 bytes
Bus: primary=00,
secondary=02, subordinate=02, sec- latency=0
I/O behind bridge:
0000e000-0000efff
Memory behind
bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz-
FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR-
<PERR-
BridgeCtl: Parity+ SERR+ NoISA+
VGA- MAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr-
DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI-
D1-
D2- AuxCurrent=0mA PME(D0+,D1-
,D2-,D3hot+,D3cold+)
Status:
D0 PME-
Enable- DSel=0 DScale=0
PME-
Capabilities: [58] Express
(v2) Root Port
(Slot+), MSI 00
DevCap: MaxPayload 128 bytes,
PhantFunc 0, Latency
L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors:
Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag-
PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128
bytes DevSta: CorrErr-
UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend- LnkCap: Port
#1, Speed 5GT/s, Width x1, ASPM L0s L1,
Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB
64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM-
AutWidDis- BWInt- AutBWInt-
LnkSta: Speed
2.5GT/s,
Width x1,
TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap:
AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot #
a,
PowerLimit 25.000000; Interlock-
NoCompl+
SltCtl: Enable:
AttnBtn-
PwrFlt- MRL- PresDet-
CmdCplt- HPIrq- LinkChg-
Control: AttnInd
Unknown, PwrInd
Unknown, Power- Interlock-
SltSta: Status: AttnBtn-
PowerFlt-
MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+
LinkState+
RootCtl: ErrCorrectable-
ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
RootCap:
CRSVisible-
RootSta: PME
ReqID
0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not
Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to
50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s,
EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit
Margin: Normal Operating
Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-
emphasis: -6dB
LnkSta2: Current De-emphasis Level:
-6dB
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit-
Count=1/1 Enable+
Address: fee0f00c Data: 4161
Capabilities:
[b0]
Subsystem: ASUSTeK Computer Inc. Device 83a2 Capabilities:
[b8]
HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities:
[100] Vendor
Specific Information <?> Capabilities: [110]
Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:11.0 SATA controller: ATI
Technologies Inc SB700/SB800 SATA
Controller [AHCI mode] (prog-if 01
[AHCI 1.0]) Subsystem:
ASUSTeK Computer Inc. Device 8389
Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr-
DEVSEL=medium TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64,
Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000
[size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O
ports at
9000
[size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory
at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities:
[60]
Power Management version 2 Flags: PMEClk-
DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME- Enable- DSel=0
DScale=0 PME- Capabilities: [70]
SATA HBA <?>
Kernel driver in use:
ahci
00:12.0 USB
Controller: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Control:
I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+
UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt:
pin A routed to
IRQ 16
Region 0: Memory at fe9fe000
(32-bit, non-
prefetchable)
[size=4K]
Kernel driver in use:
ohci_hcd
Kernel modules: ohci-
hcd
00:12.1 USB Controller:
ATI Technologies Inc SB700
USB
OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer
Inc. Device 8389
Control: I/O+
Mem+ BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap-
66MHz+ UDF- FastB2B+
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
SERR- <PERR-
INTx-
Latency: 64, Cache Line Size: 64
bytes
Interrupt: pin A
routed to IRQ 16
Region 0: Memory at
fe9fd000 (32-bit, non-
prefetchable) [size=4K]
Kernel driver in
use: ohci_hcd
Kernel
modules: ohci-hcd
00:12.2 USB
Controller: ATI Technologies Inc
SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem:
ASUSTeK
Computer Inc. Device 8389
Control: I/O- Mem+ BusMaster+
SpecCycle-
MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+
UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- SERR- <PERR- INTx- Latency: 64,
Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9ff800 (32-
bit, non-prefetchable) [size=256]
Capabilities: [c0] Power
Management
version 2 Flags: PMEClk-
DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,
D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge:
PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver
in use: ehci_hcd
Kernel
modules: ehci-hcd
00:13.0 USB
Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-
if 10 [OHCI]) Subsystem:
ASUSTeK Computer Inc. Device 8389
Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
DisINTx-
Status: Cap- 66MHz+
UDF- FastB2B+ ParErr-
DEVSEL=medium TAbort- <TAbort- <MAbort- SERR- <PERR- INTx- Latency: 64, Cache
Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region
0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K]
Kernel
driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB
Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10
[OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Control: I/O+
Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+
FastB2B- DisINTx- Status: Cap- 66MHz+ UDF-
FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency:
64, Cache Line Size: 64 bytes Interrupt:
pin A routed to IRQ 18
Region 0: Memory at fe9fb000 (32-bit, non-
prefetchable) [size=4K]
Kernel driver in use: ohci_hcd Kernel
modules: ohci-hcd
00:13.2 USB Controller: ATI Technologies Inc
SB700/SB800 USB EHCI Controller (prog-
if 20 [EHCI]) Subsystem:
ASUSTeK Computer Inc. Device 8389
Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64,
Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe9ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk-
DSI- D1+
D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-
Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+
Capabilities: [e4]
Debug port: BAR=1 offset=00e0 Kernel driver
in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus:
ATI Technologies Inc SBx00 SMBus
Controller (rev 3c) Subsystem:
ASUSTeK Computer Inc. Device 8389
Control: I/O+ Mem+ BusMaster-
SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Capabilities:
[b0] HyperTransport: MSI Mapping Enable- Fixed+
00:14.1 IDE
interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if
8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device 8389
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+
UDF- FastB2B-
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
SERR- <PERR- INTx-
Latency: 64 Interrupt: pin A routed to
IRQ 16
Region 0: I/O ports at 01f0 [size=8] Region 1: I/O
ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00
[size=16]
Capabilities: [70] Message Signalled Interrupts: Mask-
64bit- Count=1/1 Enable-
Address: 00000000 Data:
0000
Kernel driver in use: pata_atiixp
00:14.2 Audio device: ATI
Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK
Computer
Inc. Device
836c
Control: I/O- Mem+ BusMaster+
SpecCycle- MemWINV-
VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz-
UDF- FastB2B- ParErr- DEVSEL=slow
TAbort- <TAbort- <MAbort-
SERR-
<PERR- INTx-
Latency: 64,
Cache Line Size: 64 bytes
Interrupt:
pin ? routed to IRQ 16
Region 0: Memory at fe9f4000 (64-bit, non-
prefetchable) [size=16K]
Capabilities: [50] Power Management version
2
Flags: PMEClk-
DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-, D3hot+,
D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver
in
use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA
bridge:
ATI Technologies Inc SB700/SB800 LPC host
controller
Subsystem:
ASUSTeK Computer Inc. Device 8389
Control: I/O+ Mem+ BusMaster+
SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0
00:14.4 PCI bridge: ATI Technologies
Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive
decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
INTx-
Latency: 64 Bus: primary=00, secondary=03,
subordinate=03, sec-
latency=64 I/O behind bridge: 0000f000-
00000fff
Memory
behind bridge:
fff00000-000fffff Prefetchable
memory behind bridge: fff00000-000fffff
Secondary status: 66MHz-
FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR-
<PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA-
MAbort- >Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
00:14.5
USB Controller: ATI Technologies Inc
SB700/SB800 USB OHCI2
Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.
Device 8389
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap-
66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64
bytes
Interrupt: pin C routed to IRQ 18 Region 0: Memory at
fe9fa000
(32-bit, non-prefetchable) [size=4K] Kernel driver in
use: ohci_hcd
Kernel modules: ohci-hcd
00:18.0 Host bridge:
Advanced Micro Devices
[AMD] Family 10h [Opteron, Athlon64,
Sempron] HyperTransport
Configuration Control: I/O- Mem-
BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
DEVSEL=fast
TAbort- <TAbort- <MAbort-
SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or
Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
HostHide+ Slave-
<EOCErr- DUL-
Link
Control: CFlE- CST- CFE- <LkFail-
Init+ EOC-
TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
Link Config:
MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit
DwFcOutEn- Revision ID:
3.00
Link Frequency: [b] Link
Error:
<Prot- <Ovfl- <EOC-
CTLTm-
Link Frequency Capability:
200MHz+ 300MHz-
400MHz+
500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4 GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS-
UCnfE-
00:18.1 Host bridge:
Advanced Micro Devices [AMD] Family 10h
[Opteron, Athlon64,
Sempron] Address Map
Control: I/O- Mem-
BusMaster-
SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:
18.2 Host bridge: Advanced
Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM
Controller Control: I/O- Mem- BusMaster-
SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules:
amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices
[AMD] Family 10h [Opteron, Athlon64, Sempron]
Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz-
UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR-
<PERR- INTx-
Capabilities: [f0] Secure device <?>
00: 18.4
Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
Control: I/O- Mem- BusMaster-
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible
controller: ATI Technologies Inc Device 954f (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device 02a8
Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
FastB2B- ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes Interrupt:
pin A routed to IRQ 18
Region 0: Memory at d0000000 (64-bit,
prefetchable) [size=256M]
Region 2: Memory at feaf0000 (64-bit,
non-prefetchable) [size=64K]
Region 4: I/O ports at d000
[size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI-
D1+
D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status:
D0 PME-
Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express
(v2) Legacy
Endpoint, MSI 00 DevCap: MaxPayload 128 bytes,
PhantFunc 0, Latency
L0s <4us, L1 unlimited ExtTag+ AttnBtn-
AttnInd- PwrInd- RBE+
FLReset- DevCtl: Report errors:
Correctable- Non-Fatal- Fatal-
Unsupported- RlxdOrd+ ExtTag-
PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq
128 bytes
DevSta: CorrErr-
UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
LnkCap: Port #0,
Speed 2.5GT/s, Width x16,
ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise-
LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64
bytes Disabled-
Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis-
BWInt-
AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout:
Not
Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to
50ms,
TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s,
EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal
Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance
De-emphasis: -6dB LnkSta2:
Current De-emphasis Level: -6dB
Capabilities: [a0] Message
Signalled Interrupts: Mask- 64bit+ Count=1/1
Enable- Address:
0000000000000000 Data: 0000
Capabilities: [100] Vendor Specific
Information <?>
01:00.1 Audio device: ATI Technologies Inc
Device aa38
Subsystem: ASUSTeK Computer Inc. Device aa38
Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping-
SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF-
FastB2B- ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes Interrupt:
pin B routed to IRQ 28
Region 0: Memory at feaec000 (64-bit, non-
prefetchable) [size=16K]
Capabilities: [50] Power Management
version 3
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0-,D1-
, D2-,D3hot-,D3cold-)
Status: D0 PME-Enable-
DSel=0 DScale=0
PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128
bytes,
MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr-
FatalErr- UnsuppReq-
AuxPwr- TransPend- LnkCap: Port #0, Speed
2.5GT/s, Width x16, ASPM
L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB
64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM-
AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s,
Width x16,
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2:
Completion Timeout: Not Supported, TimeoutDis-
DevCtl2:
Completion
Timeout: 50us to
50ms, TimeoutDis-
LnkCtl2: Target
Link Speed: 2.5
GT/s,
EnterCompliance- SpeedDis-, Selectable De- emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-
emphasis: -6dB
LnkSta2: Current
De-
emphasis Level: -6dB
Capabilities: [a0] Message Signalled Interrupts:
Mask- 64bit+
Count=1/1 Enable+
Address:
00000000fee0f00c Data: 4189
Capabilities: [100] Vendor Specific Information <?>
Kernel driver
in
use: HDA Intel Kernel
modules: snd-hda-intel
02:00.0
Ethernet
controller: Realtek
Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet
controller (rev 03)
Subsystem:
ASUSTeK Computer Inc.
Device 83a3
Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV-
VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz-
UDF- FastB2B- ParErr- DEVSEL=fast
TAbort- <TAbort- <MAbort-
SERR-
<PERR- INTx-
Latency: 0, Cache
Line Size: 64 bytes
Interrupt:
pin A routed to IRQ 27
Region
0: I/O ports at e800 [size=256]
Region
2: Memory at fdfff000 (64-
bit, prefetchable) [size=4K]
Region 4:
Memory at fdff8000 (64-
bit, prefetchable) [size=16K]
Expansion ROM at
febf0000
[disabled] [size=64K]
Capabilities:
[40] Power Management
version 3
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=375mA PME(D0+, D1+,
D2+,D3hot+,D3cold+) Status: D0 PME-
Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled
Interrupts: Mask- 64bit+ Count=1/1
Enable+ Address:
00000000fee0f00c Data: 4179
Capabilities: [70] Express (v2)
Endpoint, MSI 01
DevCap:
MaxPayload 256 bytes, PhantFunc
0,
Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd-
RBE+ FLReset-
DevCtl: Report
errors: Correctable- Non-Fatal- Fatal-
Unsupported- RlxdOrd-
ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes,
MaxReadReq 4096 bytes
DevSta: CorrErr+
UncorrErr- FatalErr-
UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0,
Speed 2.5GT/s,
Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+
Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64
bytes
Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis-
BWInt- AutBWInt-
LnkSta: Speed 2.5
GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not
Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms,
TimeoutDis- LnkCtl2:
Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable
De-emphasis: -6dB
Transmit Margin: Normal
Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance
De-
emphasis: -6dB
LnkSta2:
Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
Vector table:
BAR=4
offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital
Product Data
<?>
Capabilities: [100]
Advanced Error Reporting
UESta:
DLP-
SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES+
TLP- FCP+
CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq-
ACSVoil-
CESta: RxErr- BadTLP-
BadDLLP- Rollover- Timeout-
NonFatalErr+
CESta: RxErr- BadTLP-
BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error
Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn- Capabilities: [140]
Virtual Channel <?>
Capabilities: [160]
Device Serial Number 00-
00-00-00-00-00-00-00
Kernel driver in use:
r8169
Risparmia con Tutto Incluso Light: telefono + adsl 8 mega a soli 14,95 € al mese.
Gratis la Sim Tiscali Mobile con 25 euro di traffico!
L'offerta è
valida solo se attivi entro il 20/05/10
http:
//abbonati.tiscali. it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT. mc_id=01fw
_______________________________________________ Alsa- devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa- project. org/mailman/listinfo/alsa-devel
Trova Casa sul portale immobiliare n°1 in Italia
Trova Casa sul portale immobiliare n°1 in Italia