Hi Mark, This power patch modifies some widgets to fix power saving issue when standby. But we want to submit a depop patch to fine tune widgets and fix the pop noise now. It has overlap with the power patch. Can we make the depop patch based on the power patch? Could you give us advice how to make submit patch in this case? Thank you very much.
BR. John
On 1/15/2016 11:53 PM, AC30 KCHsu0 wrote:
Fix unnecessary widget power up when standby; And decrease internal clock frequency to save power.
Signed-off-by: John Hsu KCHSU0@nuvoton.com
sound/soc/codecs/nau8825.c | 49 +++++++++++++++++++++++++++++++++------------- 1 file changed, 35 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 52882e4..f9752cc 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -262,6 +262,29 @@ static int nau8825_playback_event(struct snd_soc_dapm_widget *w, return 0; }
+static int nau8825_dacr_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event) {- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
- struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
- switch (event) {
- case SND_SOC_DAPM_POST_PMU:
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR);break;- case SND_SOC_DAPM_POST_PMD:
if (!nau8825->irq)regmap_update_bits(nau8825->regmap,NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_DACR, 0);break;- default:
return -EINVAL;- }
- return 0;
+}
static const char * const nau8825_adc_decimation[] = { "32", "64", "128", "256" @@ -337,16 +360,17 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { 0),
/* ADC for button press detection */
- SND_SOC_DAPM_ADC("SAR", NULL, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_ADC_EN_SFT, 0),
SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL,
NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0),SND_SOC_DAPM_DAC("ADACL", NULL, NAU8825_REG_RDAC, 12, 0), SND_SOC_DAPM_DAC("ADACR", NULL, NAU8825_REG_RDAC, 13, 0), SND_SOC_DAPM_SUPPLY("ADACL Clock", NAU8825_REG_RDAC, 8, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("ADACR Clock", NAU8825_REG_RDAC, 9, 0, NULL, 0),
- SND_SOC_DAPM_DAC("DDACR", NULL, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACR_SFT, 0),
SND_SOC_DAPM_DAC_E("DDACR", NULL, SND_SOC_NOPM, 0, 0,
nau8825_dacr_event, SND_SOC_DAPM_POST_PMU |SND_SOC_DAPM_POST_PMD),SND_SOC_DAPM_DAC("DDACL", NULL, NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_DACL_SFT, 0), SND_SOC_DAPM_SUPPLY("DDAC Clock", NAU8825_REG_ENA_CTRL, 6, 0, NULL, 0), @@ -878,13 +902,6 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec)
nau8825->dapm = dapm;
- /* The interrupt clock is gated by x1[10:8],
* one of them needs to be enabled all the time for* interrupts to happen.*/- snd_soc_dapm_force_enable_pin(dapm, "DDACR");
- snd_soc_dapm_sync(dapm);
- /* Unmask interruptions. Handler uses dapm object so we can enable
*/
- interruptions only after dapm is fully initialized.
@@ -1075,6 +1092,12 @@ static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, NAU8825_DCO_EN); regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,NAU8825_CLK_MCLK_SRC_MASK, 0xf);regmap_update_bits(regmap, NAU8825_REG_FLL1,NAU8825_FLL_RATIO_MASK, 0x10);regmap_update_bits(regmap, NAU8825_REG_FLL6,NAU8825_SDM_EN, NAU8825_SDM_EN);@@ -1309,9 +1332,7 @@ static int nau8825_setup_irq(struct nau8825 *nau8825) /* Enable internal VCO needed for interruptions */ nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
- /* Enable DDACR needed for interrupts
* It is the same as force_enable_pin("DDACR") we do later*/
- /* Enable DDACR needed for interrupts */ regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR);
-- 2.6.4
.