Hi;
Our legacy product code is tormenting me again. :-(
i have a 3rd party sound-fiddling library that only works with an 8k buffer. the company that wrote it is long gone. i cant change this.
i have a enourmous array of content that is coded at 44.1K. i cant change this.
i have to use a cheap soundblaster audigy card (ca0106) that only supports 48K. it sounds really good at 48K, so it seems like a winner.
the samplerate plugin is almost perfect for helping me successfully use the 48K only card with our 44.1K content.
*almost*. :-(
if i use the samplerate plugin thusly in my CA0106.conf:
CA0106.pcm.front.0 { @args [ CARD ] @args.CARD { type string } # type hw # card $CARD type rate slave { pcm "hw:0,0" rate 48000 } converter "samplerate" }
I no longer get a 8192 byte buffer, i get a 7526 byte buffer. :-(
snd_pcm_hw_params_set_buffer_size_near() fails if i try and set it to 8192, but it accepts 7526 or 15092.
I *assume* that either the samplerate plugin or libsamplerate are consuming part of the buffer for the resample job. Not at all unreasonable.
But it seems like i should be able to bump up the internal working buffer size so that i get my 8192 byte submittal buffer back.
Does anybody have any suggestions? Is there a flag or config entry that i have missed?
Or do i need to go hack something? That would be fine, but it would be nice to know where to look. :-)
Here is a succinct example of the problem, first i call speaker-test without a rate argument and then with the rate argument:
test-gntopxsg ~ # speaker-test -c2 -Dfront -t sin
speaker-test 1.0.17
Playback device is front Stream parameters are 48000Hz, S16_LE, 2 channels Sine wave rate is 440.0000Hz Rate set to 48000Hz (requested 48000Hz) Buffer size range from 32 to 16384 Period size range from 15 to 8193 Using max buffer size 16384 Periods = 4 was set period_size = 4096 was set buffer_size = 16384
test-gntopxsg ~ # speaker-test -c2 -Dfront -t sin -r44100
speaker-test 1.0.17
Playback device is front Stream parameters are 44100Hz, S16_LE, 2 channels Sine wave rate is 440.0000Hz Rate set to 44100Hz (requested 44100Hz) Buffer size range from 29 to 15052 Period size range from 14 to 7527 Using max buffer size 15052 Periods = 4 was set period_size = 3763 was set buffer_size = 15052
tnx in advance for any help you all can provide!
johnu