From: Sheetal sheetal@nvidia.com
I2S data sanity tests fail beyond a bit clock frequency of 6.144MHz. This happens because the AHUB clock rate is too low and it shows 9.83MHz on boot.
The maximum rate of PLLA_OUT0 is 49.152MHz and is used to serve I/O clocks. It is recommended that AHUB clock operates higher than this. Thus fix this by using PLLP_OUT0 as parent clock for AHUB instead of PLLA_OUT0 and fix the rate to 81.6MHz.
Fixes: dc94a94daa39 ("arm64: tegra: Add audio devices on Tegra234") Cc: stable@vger.kernel.org Signed-off-by: Sheetal sheetal@nvidia.com Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Mohan Kumar D mkumard@nvidia.com --- arch/arm64/boot/dts/nvidia/tegra234.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index f4974e8..0f12a8de 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -180,7 +180,8 @@ clocks = <&bpmp TEGRA234_CLK_AHUB>; clock-names = "ahub"; assigned-clocks = <&bpmp TEGRA234_CLK_AHUB>; - assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + assigned-clock-rates = <81600000>; status = "disabled";
#address-cells = <2>;