At Tue, 18 Oct 2011 14:05:53 +0200, Torsten Hilbrich wrote:
Am 18.10.2011 12:57, schrieb Takashi Iwai:
At Tue, 18 Oct 2011 12:20:28 +0200, Torsten Hilbrich wrote:
The lenovo sandy bridge notebooks (T420, T520, L520) didn't work with the external sound input and output connectors on the dockig unit (tested with P/N 45N5887).
Loading snd-hda-intel with model=thinkpad solved the problem so I added the accordings quirks to perform that decision automatically for these specific models.
Signed-off-by: Torsten Hilbrich torsten.hilbrich@secunet.com
Could you check whether model=auto with the latest kernel work? Basically I won't take any more the model-specific quirk but move all to the auto-parser as much as possible.
I just checked with upstream v3.1-rc10, model=auto didn't solve the problem on the Lenovo T520.
OK, so it's a bug of BIOS. BIOS doesn't provide the pin for docking-station.
The right fix in this case is to provide the pin config table. In sound git tree, there is a fix for Lenovo X200. A similar entry would work for you. git://github.com/tiwai/sound.git Check either topic/hda, for-next or master branch.
Here are some dmesg output with model=auto:
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 hda-intel: chipset global capabilities = 0x4401 hda-intel: Clearing TCSEL hda-intel: HDA snoop disabled, enabling ... OK hda-intel: codec_mask = 0xb hda-intel: codec #0 probed OK hda-intel: codec #1 probed OK hda-intel: codec #3 probed OK IBM TrackPoint firmware: 0x0e, buttons: 3/3 hda_codec: model 'auto' is selected hda_codec: CX20590: BIOS auto-probing. autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) hp_outs=1 (0x19/0x0/0x0/0x0/0x0) mono: mono_out=0x0 inputs: Mic=0x1b Internal Mic=0x23
when playing some audio:
hda-intel: azx_pcm_prepare: bufsize=0x10000, format=0x31 hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x31 hda_codec_setup_stream: NID=0x11, stream=0x5, channel=0, format=0x31 hda_codec_cleanup_stream: NID=0x10 hda_codec_cleanup_stream: NID=0x11
I will attach the codec#x files from /proc/asound/PCH if you need this information.
At best, please give alsa-info.sh output (run with --no-upload option).
thanks,
Takashi