From: Shuming Fan shumingf@realtek.com
- The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data
Signed-off-by: Shuming Fan shumingf@realtek.com --- sound/soc/codecs/rt1011.c | 9 ++++++++- sound/soc/codecs/rt1011.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c index 0a6ff13d76e1..b25b4c1127ca 100644 --- a/sound/soc/codecs/rt1011.c +++ b/sound/soc/codecs/rt1011.c @@ -1029,6 +1029,8 @@ static const char * const rt1011_tdm_adc_swap_select[] = {
static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6, rt1011_tdm_adc_swap_select); +static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4, + rt1011_tdm_adc_swap_select);
static void rt1011_reset(struct regmap *regmap) { @@ -1333,7 +1335,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = { /* TDM1 Data Out Selection */ SOC_ENUM("TDM1 DOUT Source", rt1011_tdm1_adc1_dat_enum), SOC_ENUM("TDM1 DOUT Location", rt1011_tdm1_adc1_loc_enum), - SOC_ENUM("TDM1 ADCDAT Swap Select", rt1011_tdm_adc1_1_enum), + SOC_ENUM("TDM1 ADC1DAT Swap Select", rt1011_tdm_adc1_1_enum), + SOC_ENUM("TDM1 ADC2DAT Swap Select", rt1011_tdm_adc2_1_enum),
/* Data Out Mode */ SOC_ENUM("I2S ADC DOUT Mode", rt1011_adc_dout_mode_enum), @@ -1355,6 +1358,10 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = { SOC_SINGLE_EXT("R0 Calibration", SND_SOC_NOPM, 0, 1, 0, rt1011_r0_cali_get, rt1011_r0_cali_put), RT1011_R0_LOAD("R0 Load Mode"), + + /* R0 temperature */ + SOC_SINGLE("R0 Temperature", RT1011_STP_INITIAL_RESISTANCE_TEMP, + 2, 255, 0), };
static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h index 98a38800c4df..5d431d7f1d16 100644 --- a/sound/soc/codecs/rt1011.h +++ b/sound/soc/codecs/rt1011.h @@ -227,6 +227,7 @@ #define RT1011_STP_CALIB_RS_TEMP 0x152a #define RT1011_INIT_RECIPROCAL_REG_24_16 0x1538 #define RT1011_INIT_RECIPROCAL_REG_15_0 0x1539 +#define RT1011_STP_INITIAL_RESISTANCE_TEMP 0x153c #define RT1011_STP_ALPHA_RECIPROCAL_MSB 0x153e #define RT1011_SPK_RESISTANCE_1 0x1544 #define RT1011_SPK_RESISTANCE_2 0x1546