Re: [alsa-devel] [PATCH 2/2] ALSA: ASoc: putting together AT91SAM9260 and TLV320AIC3X

On 03/24/2011 11:43 PM, Prchal Jiří wrote:

Hi, this patch is for example how to put together AT91SAM9260 and TLV320AIC3106 controlled via SPI. It tooks me a lot of time to make it working, so I think it could be helpfull for other people.

In original source "snd-soc-afeb9260.c" which I use as example is BIG ERROR: In function "afeb9260_soc_init" is missing call of "atmel_ssc_set_audio(0);". It cause bug "PROBLEM: Asoc driver in 2.6.37.3 for AT91SAM9260 / TLV320AIC3X is broken" which I post some time ago.

Hi Jiri,

This patch is actually doing two things: adding board support for a new at91sam9260 device and adding the audio glue for the new board. It should be split into two patches. Quick review below.

~Ryan

Depend on: [PATCH 1/2] ALSA: ASoc: TLV320AIC3X: ad SPI and clock on GPIO2 or BCLK Kernel version: 2.6.38 Signed-off-by: Jiri Prchal jiri.prchal@aksignal.cz

---

diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/board-cdu.c /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/board-cdu.c --- linux-2.6.38-vanilla/arch/arm/mach-at91/board-cdu.c 1970-01-01 01:00:00.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/board-cdu.c 2011-03-24 09:15:23.852370981 +0100 @@ -0,0 +1,345 @@ +/*

• • linux/arch/arm/mach-at91/board-cdu.c
• • Copyright (C) 2005 SAN People
• • Copyright (C) 2006 Atmel
• • Copyright (C) 2011 AKsignal Brno

• •                 jiri.prchal@aksignal.cz
    

• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License as published by
• • the Free Software Foundation; either version 2 of the License, or
• • (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
• */

+#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/clk.h> +#include <linux/spi/mcp23s08.h> +#include <linux/dma-mapping.h>

+#include <mach/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h>

+#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h>

+#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9_smc.h>

+#include "sam9_smc.h" +#include "generic.h"

+static void __init cdu_map_io(void) +{

• /* Initialize processor: 6 MHz crystal */
• at91sam9260_initialize(6000000);
• /* DBGU on ttyS0. (Rx & Tx only) */
• at91_register_uart(0, 0, 0);
• /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
• at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS

• 	   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
  

• 	   | ATMEL_UART_RI);
  

• /* USART1 on ttyS2. (Rx, Tx, RTS) */
• at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_RTS);
• /* USART2 on ttyS3. (Rx, Tx, RTS) */
• at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_RTS);
• /* USART3 on ttyS4. (Rx, Tx, RTS) */
• at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
• /* USART4 on ttyS5. (Tx) */
• /* EBUS - transmit audio, no rx */
• /*at91_register_uart(AT91SAM9260_ID_US4, 5, 0);*/
• /* set serial console to ttyS0 (ie, DBGU) */
• at91_set_serial_console(0);

+}

+static void __init cdu_init_irq(void) +{

• at91sam9260_init_interrupts(NULL);

+}

+/*

• • USB Host port
• */

+static struct at91_usbh_data __initdata cdu_usbh_data = {

• .ports = 2,

+};

+/*

• • USB Device port
• */

+static struct at91_udc_data __initdata cdu_udc_data = {

• .vbus_pin = AT91_PIN_PC15,
• .pullup_pin = 0, /* pull-up driven by UDC */

+};

+/*

• • SPI devices.
• */

+#define MCP23S08_GPIO_BASE 128

+static const struct mcp23s08_platform_data mcp23s08_gpio_info = {

• .chip[0].is_present = true,
• .chip[0].pullups = 0,
• .base = MCP23S08_GPIO_BASE,

+};

+static struct spi_board_info cdu_spi_devices[] = {

• { /* ADC LTC2488 */

• .modalias	= "spidev",
  

• .chip_select	= 0,
  

• .max_speed_hz	= 1 * 1000 * 1000,
  

• .bus_num	= 1,
  

• },
• { /* GPIO expander MCP23S08 */

• .modalias	= "mcp23s08",
  

• .chip_select	= 1,
  

• .max_speed_hz	= 1000000,
  

• .bus_num	= 1,
  

• .platform_data	= &mcp23s08_gpio_info,
  

• .mode		= SPI_MODE_3,
  

• },
• { /* non volatile memory (F-RAM) FM25VN10 */

• .modalias	= "spidev",
  

• .chip_select	= 2,
  

• .max_speed_hz	= 1 * 1000 * 1000,
  

• .bus_num	= 1,
  

• },
• { /* audiocodec TLV320AIC3106 */

• .modalias	= "tlv320aic3x-codec",
  

• .chip_select	= 3,
  

• .max_speed_hz	= 1000000,
  

• .bus_num	= 1,
  

• .mode		= SPI_MODE_1,
  

• },

+};

+/*

• • MACB Ethernet device
• */

+static struct at91_eth_data __initdata cdu_macb_data = {

• .phy_irq_pin = 0, //nc,

Don't use // comments. This line can just be deleted since it default to zero.

• .is_rmii = 1,

+};

+/*

• • NAND flash
• */

+static struct mtd_partition __initdata cdu_nand_partition[] = {

• {

• .name   = "bootstrap",
  

• .offset = 0,
  

•  .size   = 0x40000,
  

Tabbing is messed here.

• },
• {

• .name   = "uboot",
  

• .offset = 0x40000,
  

You can use MTDPART_OFS_NXTBLK for the offset to align this partition immediately after the previous one.

• .size   = (0xc0000 - 0x40000),
  

What's with the odd sizes? You should use the sizes from asm/sizes.h.

• },
• {

• .name   = "ubootenv",
  

• .offset = 0xc0000,
  

• .size   = (0x100000 - 0xc0000),
  

• },
• {

• .name   = "kernel",
  

• .offset = 0x100000,
  

• .size   = (0x400000 - 0x100000),
  

• },
• {

• .name   = "rootfs",
  

• .offset = 0x400000,
  

• .size   = (0x8000000 - 0x400000),
  

• },

+};

+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{

• *num_partitions = ARRAY_SIZE(cdu_nand_partition);
• return cdu_nand_partition;

+}

+static struct atmel_nand_data __initdata cdu_nand_data = {

• .ale = 21,
• .cle = 22,

+// .det_pin = ... not connected

Delete this line.

• .rdy_pin = AT91_PIN_PC13,
• .enable_pin = AT91_PIN_PC14,
• .partition_info = nand_partitions,
• .bus_width_16 = 0,

+};

+static struct sam9_smc_config __initdata cdu_nand_smc_config = {

• .ncs_read_setup = 0,
• .nrd_setup = 1,
• .ncs_write_setup = 0,
• .nwe_setup = 1,
• .ncs_read_pulse = 3,
• .nrd_pulse = 3,
• .ncs_write_pulse = 3,
• .nwe_pulse = 3,
• .read_cycle = 5,
• .write_cycle = 5,
• .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
• .tdf_cycles = 2,

+};

+static void __init cdu_add_device_nand(void) +{

• /* setup bus-width (8 or 16) */
• if (cdu_nand_data.bus_width_16)

• cdu_nand_smc_config.mode |= AT91_SMC_DBW_16;
  

• else

• cdu_nand_smc_config.mode |= AT91_SMC_DBW_8;
  

bus_width_16 is explicitly set to zero above, so this logic should not be needed.

• /* configure chip-select 3 (NAND) */
• sam9_smc_configure(3, &cdu_nand_smc_config);
• at91_add_device_nand(&cdu_nand_data);

+}

+/* +* MCI (SD/MMC) +*/ +static struct at91_mmc_data __initdata ek_mmc_data = {

• .slot_b = 0,
• .wire4 = 1,
• // .det_pin = ... not connected
• // .wp_pin = ... not connected
• // .vcc_pin = ... not connected

Delete these lines.

+};

+/*

• • LEDs
• */

+static struct gpio_led cdu_leds[] = {

• {

• .name			= "red",
  

• .gpio			= AT91_PIN_PC10,
  

• .default_trigger	= "timer",
  

• },
• {

• .name			= "green",
  

• .gpio			= AT91_PIN_PA5,
  

• .default_trigger	= "heartbeat",
  

• },
• {

• .name			= "yellow",
  

• .gpio			= AT91_PIN_PB20,
  

• .active_low		= 1,
  

• .default_trigger	= "mmc0",
  

• },
• {

• .name			= "blue",
  

• .gpio			= AT91_PIN_PB21,
  

• .active_low		= 1,
  

• .default_trigger	= "nand-disk",
  

• },

+};

+/*

• • GPIOs
• */

+static struct gpio gpios[] = {

• { AT91_PIN_PA0, GPIOF_OUT_INIT_LOW, "ebus_dir"},
• { AT91_PIN_PA1, GPIOF_OUT_INIT_LOW, "time_dir"},
• { AT91_PIN_PB12, GPIOF_OUT_INIT_LOW, "gsm_rst"},
• { AT91_PIN_PB13, GPIOF_OUT_INIT_LOW, "gsm_on"},
• { AT91_PIN_PC2, GPIOF_IN, "por"},
• { AT91_PIN_PC7, GPIOF_OUT_INIT_HIGH, "spk_shdn"},
• { AT91_PIN_PC0, GPIOF_IN, "in13"},
• { AT91_PIN_PC1, GPIOF_IN, "in14"},
• { AT91_PIN_PA22, GPIOF_IN, "in17"},
• { AT91_PIN_PA23, GPIOF_IN, "in18"},
• { AT91_PIN_PA24, GPIOF_IN, "in19"},
• { AT91_PIN_PA25, GPIOF_IN, "in20"},
• { AT91_PIN_PA26, GPIOF_OUT_INIT_LOW, "out15"},
• { AT91_PIN_PA27, GPIOF_OUT_INIT_LOW, "out16"},
• { AT91_PIN_PA28, GPIOF_OUT_INIT_LOW, "out17"},
• { AT91_PIN_PA29, GPIOF_OUT_INIT_LOW, "out18"},
• { AT91_PIN_PA30, GPIOF_OUT_INIT_LOW, "out19"},
• { AT91_PIN_PB29, GPIOF_OUT_INIT_LOW, "out20"},
• { MCP23S08_GPIO_BASE + 0, GPIOF_IN, "busadrp"},
• { MCP23S08_GPIO_BASE + 2, GPIOF_IN, "busadr5"},
• { MCP23S08_GPIO_BASE + 3, GPIOF_IN, "busadr4"},
• { MCP23S08_GPIO_BASE + 4, GPIOF_IN, "busadr3"},
• { MCP23S08_GPIO_BASE + 5, GPIOF_IN, "busadr2"},
• { MCP23S08_GPIO_BASE + 6, GPIOF_IN, "busadr1"},
• { MCP23S08_GPIO_BASE + 7, GPIOF_IN, "busadr0"},

+};

+static void __init cdu_add_gpio (void) +{

• int i;
• for (i = 0; i < ARRAY_SIZE (gpios); i++) {

• gpio_request_one (gpios[i].gpio, gpios[i].flags, gpios[i].label);
  

• }

Nitpick, don't need braces on the for loop here. Also, remove the spaces between cdu_add_gpiop, ARRAY_SIZE, and gpio_request_one and their opening parenthesis.

+}

+/*

• • init
• */

+static void __init cdu_board_init(void) +{

• /* Serial */
• at91_add_device_serial();
• /* USB Host */
• at91_add_device_usbh(&cdu_usbh_data);
• /* USB Device */
• at91_add_device_udc(&cdu_udc_data);
• /* SPI */
• at91_add_device_spi(cdu_spi_devices, ARRAY_SIZE(cdu_spi_devices));
• /* NAND */
• cdu_add_device_nand();
• /* Ethernet */
• at91_add_device_eth(&cdu_macb_data);
• /* MMC */
• at91_add_device_mmc(0, &ek_mmc_data);
• /* SSC */
• at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK | ATMEL_SSC_TD | ATMEL_SSC_RD));
• /* LEDs */
• at91_gpio_leds(cdu_leds, ARRAY_SIZE(cdu_leds));
• // GPIO
• cdu_add_gpio ();

I might be a bit alone on this, but I find this cut and paste comment style for the at91 device initialisation awful. The function names are very self explanatory and the comments only serve to make the init code more difficult to read. Also, remove the // comment.

+}

+MACHINE_START(AT91SAM9260EK, "CDU")

• /* Maintainer: Atmel */

Nice of you to assign maintainership of your board to Atmel :-). You should possibly add a MAINTAINERS entry for this board.

• .boot_params = AT91_SDRAM_BASE + 0x100,
• .timer = &at91sam926x_timer,
• .map_io = cdu_map_io,
• .init_irq = cdu_init_irq,
• .init_machine = cdu_board_init,

+MACHINE_END diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/Kconfig /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/Kconfig --- linux-2.6.38-vanilla/arch/arm/mach-at91/Kconfig 2011-03-15 02:20:32.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/Kconfig 2011-03-16 09:19:40.000000000 +0100 @@ -213,6 +213,12 @@ config MACH_AT91SAM9260EK Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933

+config MACH_CDU

• bool "CDU AKsignal board"
• help

•  Select this if you are using AKsignal CDU board
  

•  <http://www.aksignal.cz>
  

config MACH_CAM60 bool "KwikByte KB9260 (CAM60) board" help diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/Makefile /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/Makefile --- linux-2.6.38-vanilla/arch/arm/mach-at91/Makefile 2011-03-15 02:20:32.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/Makefile 2011-03-16 09:19:40.000000000 +0100 @@ -40,6 +40,7 @@ obj-$(CONFIG_MACH_ECO920) += board-eco92

# AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o +obj-$(CONFIG_MACH_CDU) += board-cdu.o obj-$(CONFIG_MACH_CAM60) += board-cam60.o obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o

The first patch, adding just the support for the cdu board should end here.

diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/atmel/Kconfig /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/atmel/Kconfig --- linux-2.6.38-vanilla/sound/soc/atmel/Kconfig 2011-03-15 02:20:32.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/atmel/Kconfig 2011-03-22 09:46:46.751566158 +0100 @@ -50,3 +50,11 @@ config SND_AT91_SOC_AFEB9260 select SND_SOC_TLV320AIC23 help Say Y here to support sound on AFEB9260 board.

+config SND_AT91_SOC_CDU

• tristate "SoC Audio support for CDU board"
• depends on ARCH_AT91 && MACH_CDU && SND_ATMEL_SOC
• select SND_ATMEL_SOC_SSC
• select SND_SOC_TLV320AIC3X
• help

•  Say Y here to support sound on CDU board.
  

diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/atmel/Makefile /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/atmel/Makefile --- linux-2.6.38-vanilla/sound/soc/atmel/Makefile 2011-03-15 02:20:32.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/atmel/Makefile 2011-03-16 09:26:17.000000000 +0100 @@ -14,3 +14,4 @@ snd-soc-playpaq-objs := playpaq_wm8510.o obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o +obj-$(CONFIG_SND_AT91_SOC_CDU) += snd-soc-cdu.o diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/sound/soc/atmel/snd-soc-cdu.c /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/atmel/snd-soc-cdu.c --- linux-2.6.38-vanilla/sound/soc/atmel/snd-soc-cdu.c 1970-01-01 01:00:00.000000000 +0100 +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/sound/soc/atmel/snd-soc-cdu.c 2011-03-24 09:27:55.404367652 +0100 @@ -0,0 +1,264 @@ +/*

• • snd-soc-cdu -- SoC audio for AT91SAM9260-based

• • 	AKsignal CDU board.
    

• • Copyright (C) 2005 SAN People
• • Copyright (C) 2008 Atmel
• • Copyright (C) 2011 AK signal Brno
• • Authors: Sedji Gaouaou sedji.gaouaou@atmel.com

• •      Jiri Prchal <jiri.prchal@aksignal.cz>
    

• • Based on ati_b1_wm8731.c by:
• • Frank Mandarino fmandarino@endrelia.com
• • Copyright 2006 Endrelia Technologies Inc.
• • Based on corgi.c by:
• • Copyright 2005 Wolfson Microelectronics PLC.
• • Copyright 2005 Openedhand Ltd.
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License as published by
• • the Free Software Foundation; either version 2 of the License, or
• • (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
• */

+#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/i2c.h>

+#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h>

+#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <mach/gpio.h>

Note sure you need all of these includes. linux/interrupt.h, linux/moduleparam.h, linux/timer.h and mach/gpio.h at least appear to be uneccessary.

+#include "../codecs/tlv320aic3x.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h"

+struct {

• unsigned int channels;
• snd_pcm_format_t format;
• unsigned int rate;
• unsigned int codecclk;
• unsigned int cmrdiv;
• unsigned int period;

+} cdu_audio[] = {

• /* 16 bit stereo modes */
• {2, SNDRV_PCM_FORMAT_S16_LE, 8000, 2096000, 25, 130,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 16000, 2496000, 21, 77,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 32000, 2496000, 21, 38,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 48000, 2016000, 26, 20,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 96000, 4032000, 13, 20,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 11025, 2381400, 22, 107,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 22050, 2381400, 22, 53,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 44100, 2381400, 22, 26,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 88200, 4762800, 11, 26,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 11520, 2626560, 20, 113,},
• {2, SNDRV_PCM_FORMAT_S16_LE, 23040, 2626560, 20, 56,},

Can these be calculated rather than using a table? The first two values probably don't need to be in the table since they are always the same.

+};

+static int cdu_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) +{

• struct snd_soc_pcm_runtime *rtd = substream->private_data;
• struct snd_soc_dai *codec_dai = rtd->codec_dai;
• struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
• int ret;
• int i, found = 0;
• snd_pcm_format_t format = params_format(params);
• unsigned int rate = params_rate(params);
• unsigned int channels = params_channels(params);
• /* set codec DAI configuration */
• ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);

Long lines should be broken to fit inside 80 characters.

• if (ret < 0)

• return ret;
  

• /* set cpu DAI configuration */
• ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
• if (ret < 0)

• return ret;
  

• /* find the correct audio parameters */
• for (i = 0; i < ARRAY_SIZE(cdu_audio); i++) {

• if (rate == cdu_audio[i].rate &&
  

•     format == cdu_audio[i].format &&
  

•     channels == cdu_audio[i].channels) {
  

• 	found = 1;
  

• 	break;
  

• }
  

• }
• if (!found)

• return -EINVAL;
  

Should maybe do this before doing the dai_set_fmt's since we only support some modes. Also:

/* Only support 2 channel S16_LE */ if (channels != 2 || format != SNDRV_PCM_FORMAT_S16_LE) return -EINVAL;

/* Check rate support */ for (i = 0; i < ARRAY_SIZE(cdc_audio); i++) if (rate == cdc_audio[i].rate) { found = 1; break; } if (!found) return -EINVAL;

• /* Set the codec system clock for DAC and ADC */
• ret = snd_soc_dai_set_sysclk(codec_dai, CLKIN_BCLK, cdu_audio[i].codecclk, SND_SOC_CLOCK_IN);
• if (ret < 0) {

• printk(KERN_ERR "can't set codec system clock\n");
  

You should, I think, be able to do:

struct device *dev = rtd->card->dev;

dev_err(dev, "can't set codec system clock\n");

Same goes for other printks.

• return ret;
  

• }
• /* Set the cpu clock dividers to BCLK */
• ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cdu_audio[i].cmrdiv);
• ret |= snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_TCMR_PERIOD, cdu_audio[i].period);
• ret |= snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_RCMR_PERIOD, cdu_audio[i].period);
• if (ret < 0) {

• printk(KERN_ERR "can't set cpu system clock\n");
  

• return ret;
  

• }
• return 0;

+}

+static struct snd_soc_ops cdu_ops = {

• .hw_params = cdu_hw_params,

+};

+static const struct snd_soc_dapm_widget cdu_dapm_widgets[] = {

• SND_SOC_DAPM_HP("Headphone Jack", NULL),
• SND_SOC_DAPM_LINE("Line Out", NULL),
• SND_SOC_DAPM_MIC("Mic Jack", NULL),
• SND_SOC_DAPM_LINE("Line In", NULL),

+};

+static const struct snd_soc_dapm_route intercon[] = {

• /* Headphone connected to HPLOUT, HPROUT */
• {"Headphone Jack", NULL, "HPLOUT"},
• {"Headphone Jack", NULL, "HPROUT"},
• /* Line Out connected to LLOUT, RLOUT */
• {"Line Out", NULL, "LLOUT"},
• {"Line Out", NULL, "RLOUT"},
• /* Mic connected to (MIC3L | MIC3R) */
• {"MIC3L", NULL, "Mic Bias 2V"},
• {"MIC3R", NULL, "Mic Bias 2V"},
• {"Mic Bias 2V", NULL, "Mic Jack"},
• /* Line In connected to (LINE1L | LINE2L), (LINE1R | LINE2R) */
• {"LINE1L", NULL, "Line In"},
• {"LINE2L", NULL, "Line In"},
• {"LINE1R", NULL, "Line In"},
• {"LINE2R", NULL, "Line In"},

+};

+/*

• • Logic for a aic3x as connected on a cdu board.
• */

+static int cdu_aic3x_init(struct snd_soc_pcm_runtime *rtd) +{

• struct snd_soc_codec *codec = rtd->codec;
• struct snd_soc_dai *codec_dai = rtd->codec_dai;
• struct snd_soc_dapm_context *dapm = &codec->dapm;
• int ret;
• printk(KERN_DEBUG "cdu_aic3x: cdu_aic3x_init called\n");

Is this line really needed?

• /* Add specific widgets */
• snd_soc_dapm_new_controls(dapm, cdu_dapm_widgets,

• 		  ARRAY_SIZE(cdu_dapm_widgets));
  

• /* Set up specific audio path interconnects */
• snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
• /* always connected */
• snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
• snd_soc_dapm_enable_pin(dapm, "Line Out");
• snd_soc_dapm_enable_pin(dapm, "Mic Jack");
• snd_soc_dapm_enable_pin(dapm, "Line In");
• snd_soc_dapm_sync(dapm);

IIRC, you no longer need to explicitly call snd_soc_dapm_enable_pin and snd_soc_dapm_sync. Somebody else can probably shed more light on this.

• return 0;

+}

+static struct snd_soc_dai_link cdu_dai = {

• .name = "TLV320AIC3106",
• .stream_name = "PCM",
• .cpu_dai_name = "atmel-ssc-dai.0",
• .codec_dai_name = "tlv320aic3x-hifi",
• .init = cdu_aic3x_init,

Tab-delimiting got messed here.

• .platform_name = "atmel-pcm-audio",

+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)

• .codec_name = "tlv320aic3x-codec.0-001b",

+#endif +#if defined(CONFIG_SPI_MASTER)

• .codec_name = "spi1.3",

+#endif

If both CONFIG_I2C and CONFIG_SPI_MASTER are set then you will have a broken build. Which one does the CDU board use?

• .ops = &cdu_ops,

+};

+static struct snd_soc_card snd_soc_cdu = {

• .name = "TLV320AIC3106",
• .dai_link = &cdu_dai,
• .num_links = 1,

+};

+static struct platform_device *cdu_snd_device;

+static int __init cdu_init(void) +{

• struct clk *pllb;

Remove this line, pllb is never used in this function.

• int ret;
• ret = atmel_ssc_set_audio(0);
• if (ret != 0) {

Nitpick. Just if (ret) is fine.

• pr_err("Failed to set SSC 0 for audio: %d\n", ret);
  

• return ret;
  

• }
• cdu_snd_device = platform_device_alloc("soc-audio", -1);
• if (!cdu_snd_device) {

• printk(KERN_ERR "ASoC: Platform device allocation failed\n");
  

• ret = -ENOMEM;
  

• }
• platform_set_drvdata(cdu_snd_device, &snd_soc_cdu);
• ret = platform_device_add(cdu_snd_device);
• if (ret) {

• printk(KERN_ERR "ASoC: Platform device allocation failed\n");
  

Use pr_err to be consistent.

• goto err_device_add;
  

• }
• return ret;

+err_device_add:

• platform_device_put(cdu_snd_device);

+err:

• return ret;

+}

+static void __exit cdu_exit(void) +{

• platform_device_unregister(cdu_snd_device);
• cdu_snd_device = NULL;

I don't think you need to set cdu_snd_device to NULL here.

+}

+module_init(cdu_init); +module_exit(cdu_exit);

+/* Module information */ +MODULE_AUTHOR("Jiri Prchal jiri.prchal@aksignal.cz"); +MODULE_DESCRIPTION("ALSA SoC CDU_AIC3X");

+MODULE_LICENSE("GPL");

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/