On Wed, Apr 14, 2010 at 12:46:42AM +0100, Pedro Ribeiro wrote:
On 13 April 2010 19:22, Daniel Mack daniel@caiaq.de wrote:
Some more ideas to nail this down would be to boot the machine with mem=4096M and mem=2048M to see whether this makes any difference. Also, I think it would be interesting to know whether the patch below helps.
As the real reason seems entirely obfuscated, there's unfortunately need for some trial error approach. Pedro, as you're the only one who can actually reproduce the problem, do you see any chance to do that?
Thanks, Daniel
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 4328cad..26013be 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -560,7 +560,7 @@ static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret) }
urbs[i]->transfer_buffer =
- kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL);
- kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL | GFP_DMA);
if (!urbs[i]->transfer_buffer) { log("unable to kmalloc() transfer buffer, OOM!?\n"); *ret = -ENOMEM;
Good news, I can't trigger the interference with either:
- mem=2048m
- mem=4096m
- your patch
Thanks! So the only thing I can do for now is submit exactly this patch. At least, it helps you and it shouldn't break anything. The question remains whether this type of memory should be used for all transfer_buffers.
Any idea why is mem=4096m different than a regular boot since I have 4GB anyway?
On Fri, Apr 09, 2010 at 04:11:52PM -0600, Robert Hancock wrote:
If you have 4GB of RAM then almost certainly you have memory located at addresses over 4GB. If you look at the e820 memory map printed at the start of dmesg on bootup and see entries with addresses of 100000000 or higher reported as usable, then this is the case.
Could you post the these e820 line from your dmesg when booted with mem=4096?
Daniel