-----Original Message----- From: Takashi Iwai tiwai@suse.de Sent: Tuesday, April 16, 2019 4:22 PM To: Jaroslav Kysela perex@perex.cz Cc: Kailang kailang@realtek.com; hwang4 hui.wang@canonical.com; (alsa-devel@alsa-project.org) alsa-devel@alsa-project.org Subject: Re: [alsa-devel] Dell AIO speaker pop noise
On Tue, 16 Apr 2019 10:01:31 +0200, Jaroslav Kysela wrote:
Dne 16. 04. 19 v 9:30 Kailang napsal(a):
Hi Takashi,
Issue 1: The noise keeps occurring via speaker when Headset is plugged in. Issue 2: The humming noise is occuring when switching to sound of
settings.
The noise will be stopped when switching to other options of settings.Issue 3: The popping noise occurred for one second when plugged in and
removed the headset.
This patch will solve this three issues.
Hi,
could you explain, why the power-save function causes this behaviour? Can we do something else than turning off the power-save codec settings to avoid such noises? I have this question because it's really
easy to disable something, but I feel that the culprit of the noises might be just the wrong codec settings. I guess that you have probably full documentation for the codec and probably for the hardware, so it might be nice to find the real culprit.
Note that power_save_node=0 doesn't mean that the whole power saving is disabled. It disables the fine-grained power saving, i.e. powering down the unused widget nodes.
If so, I wonder whether this might be about the default pin-shutup behavior. I improved the click noise problem on my Dell desktop by disabling the pin shutup. See commit c0ca5eced222. Kailang, Hui, did you try to add the chain to ALC269_FIXUP_NO_SHUTUP?
This noise was not happen on poweroff. AIO use external AMP. So, it will be need to have a reference voltage via codec. So, Pin-ctls was not be 0. I apply option spec->gen.suppress_auto_mute = 1 to avoid that. Internal SPK PIN also don't enter to D3. But I find it just only happen on ALC274 family codecs. ALC274 pin enter to D3. Pin-ctls also be 0. So, power_save_node=0 will let PIN to D0.
power_save = 0 it also could solve issue.
thanks,
Takashi
------Please consider the environment before printing this e-mail.