gpio_config is array of 6 elements that allows to set GPIO as floating, pullup, pulldown.
Sponsored: Google ChromeOS Signed-off-by: Anatol Pomozov anatol.pomozov@gmail.com --- Documentation/devicetree/bindings/sound/rt5677.txt | 7 ++++ include/sound/rt5677.h | 3 ++ sound/soc/codecs/rt5677.c | 39 ++++++++++++++++++++++ 3 files changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt index 0701b83..f82f0e9 100644 --- a/Documentation/devicetree/bindings/sound/rt5677.txt +++ b/Documentation/devicetree/bindings/sound/rt5677.txt @@ -27,6 +27,12 @@ Optional properties: Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential, rather than single-ended.
+- realtek,gpio-config + Array of six 8bit elements that configures GPIO. + 0 - floating (reset value) + 1 - pull down + 2 - pull up + Pins on the device (for linking into audio routes):
* IN1P @@ -56,4 +62,5 @@ rt5677 { realtek,pow-ldo2-gpio = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; realtek,in1-differential = "true"; + realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */ }; diff --git a/include/sound/rt5677.h b/include/sound/rt5677.h index 082670e..a56b429 100644 --- a/include/sound/rt5677.h +++ b/include/sound/rt5677.h @@ -27,6 +27,9 @@ struct rt5677_platform_data { bool lout3_diff; /* DMIC2 clock source selection */ enum rt5677_dmic2_clk dmic2_clk_pin; + + /* configures GPIO, 0 - floating, 1 - pulldown, 2 - pullup */ + u8 gpio_config[6]; };
#endif diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index 16aa4d9..a454df3 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -3309,6 +3309,38 @@ static int rt5677_gpio_direction_in(struct gpio_chip *chip, unsigned offset) return 0; }
+/** Configures the gpio as + * 0 - floating + * 1 - pull down + * 2 - pull up + */ +static void rt5677_gpio_config(struct rt5677_priv *rt5677, unsigned offset, + int value) +{ + int shift; + + switch (offset) { + case RT5677_GPIO1 ... RT5677_GPIO2: + shift = 2 * (1 - offset); + regmap_update_bits(rt5677->regmap, + RT5677_PR_BASE + RT5677_DIG_IN_PIN_ST_CTRL2, + 0x3 << shift, + (value & 0x3) << shift); + break; + + case RT5677_GPIO3 ... RT5677_GPIO6: + shift = 2 * (9 - offset); + regmap_update_bits(rt5677->regmap, + RT5677_PR_BASE + RT5677_DIG_IN_PIN_ST_CTRL3, + 0x3 << shift, + (value & 0x3) << shift); + break; + + default: + break; + } +} + static struct gpio_chip rt5677_template_chip = { .label = "rt5677", .owner = THIS_MODULE, @@ -3353,6 +3385,7 @@ static void rt5677_free_gpio(struct i2c_client *i2c) static int rt5677_probe(struct snd_soc_codec *codec) { struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); + int i;
rt5677->codec = codec;
@@ -3371,6 +3404,9 @@ static int rt5677_probe(struct snd_soc_codec *codec) regmap_write(rt5677->regmap, RT5677_DIG_MISC, 0x0020); regmap_write(rt5677->regmap, RT5677_PWR_DSP2, 0x0c00);
+ for (i = 0; i < RT5677_GPIO_NUM; i++) + rt5677_gpio_config(rt5677, i, rt5677->pdata.gpio_config[i]); + return 0; }
@@ -3590,6 +3626,9 @@ static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np) (rt5677->pow_ldo2 != -ENOENT)) return rt5677->pow_ldo2;
+ of_property_read_u8_array(np, "realtek,gpio-config", + rt5677->pdata.gpio_config, RT5677_GPIO_NUM); + return 0; }