During d3/d0 cycle, the connection selection index of all pins points to the default value. This needs to be restored to ensure audio is restored after d3/d0 cycle.
So store the connection selection index and program it during jack report event which gets invoked in cases like d3/d0 cycle, hot plug detection when multiple displays are connected.
Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com Signed-off-by: Sanyog Kale sanyog.r.kale@intel.com Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com ---
v1 -> v2: - Runtime resume the device explicitly in order to use snd_hdac_codec_write()
sound/soc/codecs/hdac_hdmi.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 84f7a7a36e4b..dd5863830eef 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -83,6 +83,7 @@ struct hdac_hdmi_pin { struct list_head head; hda_nid_t nid; bool mst_capable; + int conn_index; struct hdac_hdmi_port *ports; int num_ports; struct hdac_ext_device *edev; @@ -141,6 +142,9 @@ struct hdac_hdmi_priv {
#define hdev_to_hdmi_priv(_hdev) ((to_ehdac_device(_hdev))->private_data)
+static int hdac_hdmi_port_select_set(struct hdac_ext_device *edev, + struct hdac_hdmi_port *port); + static struct hdac_hdmi_pcm * hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi, struct hdac_hdmi_cvt *cvt) @@ -167,6 +171,30 @@ static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,
if (is_connect) { /* + * Increment the usage count to ensure that the device + * is runtime active to send verb across. + */ + pm_runtime_get_sync(&edev->hdev.dev); + + /* set the device if pin is mst_capable */ + if (hdac_hdmi_port_select_set(edev, port) < 0) { + dev_err(&edev->hdev.dev, + "port %d device select fail\n", port->id); + return; + } + + /* + * Restore the connection selection index of the + * respective pin. + */ + if (port->pin->conn_index > 0) + snd_hdac_codec_write(&edev->hdev, port->pin->nid, + 0, AC_VERB_SET_CONNECT_SEL, + port->pin->conn_index - 1); + + pm_runtime_put_sync(&edev->hdev.dev); + + /* * Report Jack connect event when a device is connected * for the first time where same PCM is attached to multiple * ports. @@ -903,6 +931,9 @@ static int hdac_hdmi_set_pin_port_mux(struct snd_kcontrol *kcontrol, } }
+ if (ucontrol->value.enumerated.item[0] > 0) + port->pin->conn_index = ucontrol->value.enumerated.item[0]; + /* * Jack status is not reported during device probe as the * PCMs are not registered by then. So report it here.