5 Dec
2013
5 Dec
'13
12:15 p.m.
On Thu, Dec 05, 2013 at 10:56:31AM +0800, Nicolin Chen wrote:
As far as I can understand, the point that all the outputs needs the device to be clocked is undeniably true, but the external MCLK should be sufficient to source the SYSCLK of WM8962. Does the bypass mode also need to set FLL to get an accurate frequency?
The device is going to need a clock that's in spec to make sure that the device performs in spec, if the device is clocked from a 32kHz clock (which is quite a common configuration and one that's supported by the machine driver since it gets the clock from DT) that's definitely not going to be the case and I'd not expect it to work at all sensibly.