Convert to driver to use either platform_data or device-tree for configuration of the device. When using device-tree, the I2S block's configuration is read from the relevant registers: this reduces the amount of information required in the device tree.
Signed-off-by: Andrew Jackson Andrew.Jackson@arm.com --- .../devicetree/bindings/sound/designware-i2s.txt | 32 +++ sound/soc/dwc/Kconfig | 1 + sound/soc/dwc/designware_i2s.c | 238 ++++++++++++++++---- 3 files changed, 222 insertions(+), 49 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt new file mode 100644 index 0000000..cdee591 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt @@ -0,0 +1,32 @@ +DesignWare I2S controller + +Required properties: + - compatible : Must be "snps,designware-i2s" + - reg : Must contain I2S core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + The controller expects two clocks, the clock used for the APB interface and + the clock used as the sampling rate reference clock sample. + - clock-names : "apb_plck" for the clock to the APB interface, "i2sclk" for the sample + rate reference clock. + - dmas: Pairs of phandle and specifier for the DMA channels that are used by + the core. The core expects one or two dma channels, one for transmit and one for + receive. + - dma-names : "tx" for the transmit channel, "rx" for the receive channel. + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + + soc_i2s: i2s@7ff90000 { + compatible = "snps,designware-i2s"; + reg = <0x0 0x7ff90000 0x0 0x1000>; + clocks = <&scpi_i2sclk 0>, <&soc_refclk100mhz>; + clock-names = "i2sclk", "apb_pclk"; + #sound-dai-cells = <0>; + dmas = <&dma0 5>; + dma-names = "tx"; + }; diff --git a/sound/soc/dwc/Kconfig b/sound/soc/dwc/Kconfig index e334900..d50e085 100644 --- a/sound/soc/dwc/Kconfig +++ b/sound/soc/dwc/Kconfig @@ -1,6 +1,7 @@ config SND_DESIGNWARE_I2S tristate "Synopsys I2S Device Driver" depends on CLKDEV_LOOKUP + select SND_SOC_GENERIC_DMAENGINE_PCM help Say Y or M if you want to add support for I2S driver for Synopsys desigwnware I2S device. The device supports upto diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c index c497ada..083779d 100644 --- a/sound/soc/dwc/designware_i2s.c +++ b/sound/soc/dwc/designware_i2s.c @@ -22,6 +22,7 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> +#include <sound/dmaengine_pcm.h>
/* common register for all channel */ #define IER 0x000 @@ -54,19 +55,46 @@ #define I2S_COMP_VERSION 0x01F8 #define I2S_COMP_TYPE 0x01FC
+/* + * Component parameter register fields - define the I2S block's + * configuration. + */ +#define COMP1_TX_WORDSIZE_3(r) (((r) & GENMASK(27, 25)) >> 25) +#define COMP1_TX_WORDSIZE_2(r) (((r) & GENMASK(24, 22)) >> 22) +#define COMP1_TX_WORDSIZE_1(r) (((r) & GENMASK(21, 19)) >> 19) +#define COMP1_TX_WORDSIZE_0(r) (((r) & GENMASK(18, 16)) >> 16) +#define COMP1_TX_CHANNELS(r) (((r) & GENMASK(10, 9)) >> 9) +#define COMP1_RX_CHANNELS(r) (((r) & GENMASK(8, 7)) >> 7) +#define COMP1_RX_ENABLED(r) (((r) & BIT(6)) >> 6) +#define COMP1_TX_ENABLED(r) (((r) & BIT(5)) >> 5) +#define COMP1_MODE_EN(r) (((r) & BIT(4)) >> 4) +#define COMP1_FIFO_DEPTH_GLOBAL(r) (((r) & GENMASK(3, 2)) >> 2) +#define COMP1_APB_DATA_WIDTH(r) (((r) & GENMASK(1, 0)) >> 0) + +#define COMP2_RX_WORDSIZE_3(r) (((r) & GENMASK(12, 10)) >> 10) +#define COMP2_RX_WORDSIZE_2(r) (((r) & GENMASK(9, 7)) >> 7) +#define COMP2_RX_WORDSIZE_1(r) (((r) & GENMASK(5, 3)) >> 3) +#define COMP2_RX_WORDSIZE_0(r) (((r) & GENMASK(2, 0)) >> 0) + #define MAX_CHANNEL_NUM 8 #define MIN_CHANNEL_NUM 2
+union snd_dma_data { + struct i2s_dma_data pd; + struct snd_dmaengine_dai_dma_data dt; +}; + struct dw_i2s_dev { void __iomem *i2s_base; struct clk *clk; int active; unsigned int capability; struct device *dev; + bool using_pd;
/* data related to DMA transfers b/w i2s and DMAC */ - struct i2s_dma_data play_dma_data; - struct i2s_dma_data capture_dma_data; + union snd_dma_data play_dma_data; + union snd_dma_data capture_dma_data; struct i2s_clk_config_data config; int (*i2s_clk_cfg)(struct i2s_clk_config_data *config); }; @@ -153,7 +181,7 @@ static int dw_i2s_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai) { struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai); - struct i2s_dma_data *dma_data = NULL; + union snd_dma_data *dma_data = NULL;
if (!(dev->capability & DWC_I2S_RECORD) && (substream->stream == SNDRV_PCM_STREAM_CAPTURE)) @@ -227,8 +255,7 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
i2s_disable_channels(dev, substream->stream);
- /* Iterate over set of channels - independently controlled. - */ + /* Iterate over set of channels - independently controlled. */ do { if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { i2s_write_reg(dev->i2s_base, TCR(ch_reg), @@ -251,13 +278,18 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
config->sample_rate = params_rate(params);
- if (!dev->i2s_clk_cfg) - return -EINVAL; + if (dev->using_pd) { + ret = dev->i2s_clk_cfg(config); + if (ret < 0) { + dev_err(dev->dev, "runtime audio clk config fail\n"); + return ret; + } + } else { + u32 bitclk;
- ret = dev->i2s_clk_cfg(config); - if (ret < 0) { - dev_err(dev->dev, "runtime audio clk config fail\n"); - return ret; + /* TODO: Validate sample rate against permissible set */ + bitclk = config->sample_rate * config->data_width * 2; + clk_set_rate(dev->clk, bitclk); }
return 0; @@ -331,6 +363,31 @@ static int dw_i2s_resume(struct snd_soc_dai *dai) #define dw_i2s_resume NULL #endif
+/* Maximum resolution of a channel - not uniformly spaced */ +static const u32 fifo_width[] = { + 12, 16, 20, 24, 32, 0, 0, 0 +}; + +/* Width of (DMA) bus */ +static const u32 bus_widths[] = { + DMA_SLAVE_BUSWIDTH_1_BYTE, + DMA_SLAVE_BUSWIDTH_2_BYTES, + DMA_SLAVE_BUSWIDTH_4_BYTES, + DMA_SLAVE_BUSWIDTH_UNDEFINED +}; + +/* PCM format to support channel resolution */ +static const u32 formats[] = { + SNDRV_PCM_FMTBIT_S16_LE, + SNDRV_PCM_FMTBIT_S16_LE, + SNDRV_PCM_FMTBIT_S24_LE, + SNDRV_PCM_FMTBIT_S24_LE, + SNDRV_PCM_FMTBIT_S32_LE, + 0, + 0, + 0 +}; + static int dw_i2s_probe(struct platform_device *pdev) { const struct i2s_platform_data *pdata = pdev->dev.platform_data; @@ -340,11 +397,6 @@ static int dw_i2s_probe(struct platform_device *pdev) unsigned int cap; struct snd_soc_dai_driver *dw_i2s_dai;
- if (!pdata) { - dev_err(&pdev->dev, "Invalid platform data\n"); - return -EINVAL; - } - dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); if (!dev) { dev_warn(&pdev->dev, "kzalloc fail\n"); @@ -373,47 +425,114 @@ static int dw_i2s_probe(struct platform_device *pdev) return PTR_ERR(dev->i2s_base); }
- cap = pdata->cap; - dev->capability = cap; - dev->i2s_clk_cfg = pdata->i2s_clk_cfg; + if (pdata) { + dev->using_pd = true; + cap = pdata->cap; + dev->capability = cap; + dev->i2s_clk_cfg = pdata->i2s_clk_cfg; + if (!dev->i2s_clk_cfg) { + dev_err(&pdev->dev, "no clock device\n"); + return -ENODEV; + }
- /* Set DMA slaves info */ + /* Set DMA slaves info */ + + dev->play_dma_data.pd.data = pdata->play_dma_data; + dev->capture_dma_data.pd.data = pdata->capture_dma_data; + dev->play_dma_data.pd.addr = res->start + I2S_TXDMA; + dev->capture_dma_data.pd.addr = res->start + I2S_RXDMA; + dev->play_dma_data.pd.max_burst = 16; + dev->capture_dma_data.pd.max_burst = 16; + dev->play_dma_data.pd.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + dev->capture_dma_data.pd.addr_width = + DMA_SLAVE_BUSWIDTH_2_BYTES; + dev->play_dma_data.pd.filter = pdata->filter; + dev->capture_dma_data.pd.filter = pdata->filter; + + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + + if (cap & DWC_I2S_PLAY) { + dev_dbg(&pdev->dev, " designware: play supported\n"); + dw_i2s_dai->playback.channels_min = MIN_CHANNEL_NUM; + dw_i2s_dai->playback.channels_max = pdata->channel; + dw_i2s_dai->playback.formats = pdata->snd_fmts; + dw_i2s_dai->playback.rates = pdata->snd_rates; + }
- dev->play_dma_data.data = pdata->play_dma_data; - dev->capture_dma_data.data = pdata->capture_dma_data; - dev->play_dma_data.addr = res->start + I2S_TXDMA; - dev->capture_dma_data.addr = res->start + I2S_RXDMA; - dev->play_dma_data.max_burst = 16; - dev->capture_dma_data.max_burst = 16; - dev->play_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - dev->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - dev->play_dma_data.filter = pdata->filter; - dev->capture_dma_data.filter = pdata->filter; + if (cap & DWC_I2S_RECORD) { + dev_dbg(&pdev->dev, "designware: record supported\n"); + dw_i2s_dai->capture.channels_min = MIN_CHANNEL_NUM; + dw_i2s_dai->capture.channels_max = pdata->channel; + dw_i2s_dai->capture.formats = pdata->snd_fmts; + dw_i2s_dai->capture.rates = pdata->snd_rates; + } + } else { + /* + * Read component parameter registers to extract + * the I2S block's configuration. + */ + u32 comp1 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_1); + u32 comp2 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_2); + u32 bus_width = bus_widths[COMP1_APB_DATA_WIDTH(comp1)]; + u32 fifo_depth = 1 << (1 + COMP1_FIFO_DEPTH_GLOBAL(comp1)); + u32 max_size; + + dev->using_pd = false; + + dev->clk = devm_clk_get(&pdev->dev, "i2sclk"); + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + + /* + * Code presumes all channels are configured with the same + * word size. + */ + if (COMP1_TX_ENABLED(comp1)) { + dev_dbg(&pdev->dev, "playback capable\n"); + + dev->capability |= DWC_I2S_PLAY; + max_size = COMP1_TX_WORDSIZE_0(comp1); + dev->play_dma_data.dt.addr = res->start + I2S_TXDMA; + dev->play_dma_data.dt.addr_width = bus_width; + dev->play_dma_data.dt.chan_name = "TX"; + dev->play_dma_data.dt.fifo_size = fifo_depth * + (fifo_width[max_size]) >> 8; + dev->play_dma_data.dt.maxburst = 16; + dw_i2s_dai->playback.channels_min = MIN_CHANNEL_NUM; + dw_i2s_dai->playback.channels_max = + 1 << (COMP1_TX_CHANNELS(comp1) + 1); + dw_i2s_dai->playback.formats = formats[max_size]; + dw_i2s_dai->playback.rates = SNDRV_PCM_RATE_8000_192000; + } + if (COMP1_RX_ENABLED(comp1)) { + dev_dbg(&pdev->dev, "record capable\n"); + + dev->capability |= DWC_I2S_RECORD; + max_size = COMP2_RX_WORDSIZE_0(comp2); + dev->capture_dma_data.dt.addr = res->start + I2S_RXDMA; + dev->capture_dma_data.dt.addr_width = bus_width; + dev->capture_dma_data.dt.chan_name = "RX"; + dev->capture_dma_data.dt.fifo_size = fifo_depth * + (fifo_width[max_size] >> 8); + dev->capture_dma_data.dt.maxburst = 16; + dw_i2s_dai->capture.channels_min = MIN_CHANNEL_NUM; + dw_i2s_dai->capture.channels_max = + 1 << (COMP1_RX_CHANNELS(comp1) + 1); + dw_i2s_dai->capture.formats = formats[max_size]; + dw_i2s_dai->capture.rates = SNDRV_PCM_RATE_8000_192000; + } + }
- dev->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(dev->clk)) - return PTR_ERR(dev->clk); + ret = clk_prepare(dev->clk); + if (ret < 0) + goto err_clk_put;
ret = clk_enable(dev->clk); if (ret < 0) goto err_clk_put;
- if (cap & DWC_I2S_PLAY) { - dev_dbg(&pdev->dev, " designware: play supported\n"); - dw_i2s_dai->playback.channels_min = MIN_CHANNEL_NUM; - dw_i2s_dai->playback.channels_max = pdata->channel; - dw_i2s_dai->playback.formats = pdata->snd_fmts; - dw_i2s_dai->playback.rates = pdata->snd_rates; - } - - if (cap & DWC_I2S_RECORD) { - dev_dbg(&pdev->dev, "designware: record supported\n"); - dw_i2s_dai->capture.channels_min = MIN_CHANNEL_NUM; - dw_i2s_dai->capture.channels_max = pdata->channel; - dw_i2s_dai->capture.formats = pdata->snd_fmts; - dw_i2s_dai->capture.rates = pdata->snd_rates; - } - dev->dev = &pdev->dev; dev_set_drvdata(&pdev->dev, dev); ret = snd_soc_register_component(&pdev->dev, &dw_i2s_component, @@ -423,6 +542,15 @@ static int dw_i2s_probe(struct platform_device *pdev) goto err_clk_disable; }
+ if (!dev->using_pd) { + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); + if (ret) { + dev_err(&pdev->dev, + "Could not register PCM: %d\n", ret); + return ret; + } + } + return 0;
err_clk_disable: @@ -443,12 +571,24 @@ static int dw_i2s_remove(struct platform_device *pdev) return 0; }
+#ifdef CONFIG_OF +static const struct of_device_id dw_i2s_of_match[] = { + { .compatible = "snps,designware-i2s", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, dw_i2s_of_match); +#endif + static struct platform_driver dw_i2s_driver = { .probe = dw_i2s_probe, .remove = dw_i2s_remove, .driver = { .name = "designware-i2s", .owner = THIS_MODULE, +#ifdef CONFIG_OF + .of_match_table = dw_i2s_of_match, +#endif }, };