At Thu, 23 Oct 2008 19:15:26 +0200, I wrote:
At Thu, 23 Oct 2008 19:07:40 +0200, I wrote:
At Thu, 23 Oct 2008 15:23:24 +0100, Jason Harvey wrote:
Takashi Iwai wrote:
What is the last kernel message from sbxfi driver? Usually it prints some messages (as debug=1 as default).
I applied the patch and when trying "mplayer wn.wav" I consistently get the following message on the console
PANIC: double fault, gdt at c13f6000 [255 bytes]
nothing else, either reboots instantly or locks up.
In case you might find it of use I modprobed at debug=3 and ran dmesg before I ran mplayer. Output attached.
Thanks.
The last entries are:
SBXFI: Setting TLB buffer page 0x1daff000 SBXFI: write(0) 0x13b004 = 0x1daff000 SBXFI: write(0) 0x13b000 = 0x0
Hm, this smells like a buffer handling issue.
I updated the sbxfi driver code now, added mutex around the code handling TLB pages. Please give it a try.
Another patch to try is the one like below (on the top of the latest code). Any change with this?
One another thing I'm wondering is whether this happens only with OSS. What happens if you do like the following to disable the sample rate conversion?
# echo mplayer 0 0 direct > /proc/asound/card0/pcm0p/oss
Takashi