On Monday 29 June 2009 08:25:05 Takashi Iwai wrote:
At Sat, 27 Jun 2009 17:07:31 +0200,
Ondrej Zary wrote:
Add basic support for CMI8329 cards. It seems to be very similar to CMI8330, but the PnP devices are different:
- AD1848 (WSS) and SB16 device IDs are swapped
- the OPL3 port is contained in SB16 device, not AD1848 (WSS)
- there is A@@0001 device (looks like some control interface - it has
only one 8-bit I/O address)
Does CMI8329 have the very same device ids? If "A@@00" is 8329-specific, you can prepend an entry like
{.id = "CMI0001", .devs = {{"@X@0001"}, {"@@@0001"}, {"@H@0001"}, {"A@@001"}},
(Note the first two are swapped.)
Yes, A@@0001 is 8329-specific. Thanks for suggestion, it works.
Is my detection code correct, shouldn't the struct pnp_dev returned pnp_request_card_device() be released somehow?
I guess so. But looks like a non-critical issue.
With additional entry, the detection code can be simplified (see patch).
Also the mixer seems to be a bit different - master volume does not work currently.
This is a problem... Does "SB Master" play any role?
Unfortunately not. Mixer elements enabled by defining ENABLE_SB_MIXER do not work. I don't know anything about mixer element arrangement in the I/O space. The 3D and loudness switches have no effect as they're probably supported only on CMI8330 (that's why it's called CMI8330/C3D).
Add basic support for CMI8329 cards. Makes PCM and OPL3 work. Does not break CMI8330 (tested).
Signed-off-by: Ondrej Zary linux@rainbow-software.org
--- linux-test/sound/isa/cmi8330.c 2009-06-27 16:32:13.000000000 +0200 +++ linux-2.6.30-pentium/sound/isa/cmi8330.c 2009-07-04 21:58:35.000000000 +0200 @@ -1,5 +1,5 @@ /* - * Driver for C-Media's CMI8330 soundcards. + * Driver for C-Media's CMI8330 and CMI8329 soundcards. * Copyright (c) by George Talusan gstalusan@uwaterloo.ca * http://www.undergrad.math.uwaterloo.ca/~gstalusa * @@ -64,7 +64,7 @@ /* */ MODULE_AUTHOR("George Talusan gstalusan@uwaterloo.ca"); -MODULE_DESCRIPTION("C-Media CMI8330"); +MODULE_DESCRIPTION("C-Media CMI8330/CMI8329"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{C-Media,CMI8330,isapnp:{CMI0001,@@@0001,@X@0001}}}");
@@ -86,38 +86,38 @@ static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
module_param_array(index, int, NULL, 0444); -MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard."); +MODULE_PARM_DESC(index, "Index value for CMI8330/CMI8329 soundcard."); module_param_array(id, charp, NULL, 0444); -MODULE_PARM_DESC(id, "ID string for CMI8330 soundcard."); +MODULE_PARM_DESC(id, "ID string for CMI8330/CMI8329 soundcard."); module_param_array(enable, bool, NULL, 0444); -MODULE_PARM_DESC(enable, "Enable CMI8330 soundcard."); +MODULE_PARM_DESC(enable, "Enable CMI8330/CMI8329 soundcard."); #ifdef CONFIG_PNP module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif
module_param_array(sbport, long, NULL, 0444); -MODULE_PARM_DESC(sbport, "Port # for CMI8330 SB driver."); +MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver."); module_param_array(sbirq, int, NULL, 0444); -MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330 SB driver."); +MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver."); module_param_array(sbdma8, int, NULL, 0444); -MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330 SB driver."); +MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver."); module_param_array(sbdma16, int, NULL, 0444); -MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330 SB driver."); +MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver.");
module_param_array(wssport, long, NULL, 0444); -MODULE_PARM_DESC(wssport, "Port # for CMI8330 WSS driver."); +MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver."); module_param_array(wssirq, int, NULL, 0444); -MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330 WSS driver."); +MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver."); module_param_array(wssdma, int, NULL, 0444); -MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver."); +MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver.");
module_param_array(fmport, long, NULL, 0444); -MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver."); +MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver."); module_param_array(mpuport, long, NULL, 0444); -MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver."); +MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver."); module_param_array(mpuirq, int, NULL, 0444); -MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port."); +MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port."); #ifdef CONFIG_PNP static int isa_registered; static int pnp_registered; @@ -156,6 +156,11 @@
typedef int (*snd_pcm_open_callback_t)(struct snd_pcm_substream *);
+enum card_type { + CMI8330, + CMI8329 +}; + struct snd_cmi8330 { #ifdef CONFIG_PNP struct pnp_dev *cap; @@ -172,11 +177,14 @@ snd_pcm_open_callback_t open; void *private_data; /* sb or wss */ } streams[2]; + + enum card_type type; };
#ifdef CONFIG_PNP
static struct pnp_card_device_id snd_cmi8330_pnpids[] = { + { .id = "CMI0001", .devs = { { "@X@0001" }, { "@@@0001" }, { "@H@0001" }, { "A@@0001" } } }, { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } }, { .id = "" } }; @@ -304,7 +312,7 @@ unsigned int idx; int err;
- strcpy(card->mixername, "CMI8330/C3D"); + strcpy(card->mixername, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
for (idx = 0; idx < ARRAY_SIZE(snd_cmi8330_controls); idx++) { err = snd_ctl_add(card, @@ -329,6 +337,9 @@ struct pnp_dev *pdev; int err;
+ /* CMI8329 has a device with ID A@@0001, CMI8330 does not */ + acard->type = (id->devs[3].id[0]) ? CMI8329 : CMI8330; + acard->cap = pnp_request_card_device(card, id->devs[0].id, NULL); if (acard->cap == NULL) return -EBUSY; @@ -345,34 +356,36 @@
err = pnp_activate_dev(pdev); if (err < 0) { - snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n"); + snd_printk(KERN_ERR "AD1848 PnP configure failure\n"); return -EBUSY; } wssport[dev] = pnp_port_start(pdev, 0); wssdma[dev] = pnp_dma(pdev, 0); wssirq[dev] = pnp_irq(pdev, 0); - fmport[dev] = pnp_port_start(pdev, 1); + if (acard->type == CMI8330) + fmport[dev] = pnp_port_start(pdev, 1);
/* allocate SB16 resources */ pdev = acard->play;
err = pnp_activate_dev(pdev); if (err < 0) { - snd_printk(KERN_ERR "CMI8330/C3D (SB16) PnP configure failure\n"); + snd_printk(KERN_ERR "SB16 PnP configure failure\n"); return -EBUSY; } sbport[dev] = pnp_port_start(pdev, 0); sbdma8[dev] = pnp_dma(pdev, 0); sbdma16[dev] = pnp_dma(pdev, 1); sbirq[dev] = pnp_irq(pdev, 0); + if (acard->type == CMI8329) + fmport[dev] = pnp_port_start(pdev, 1);
/* allocate MPU-401 resources */ pdev = acard->mpu;
err = pnp_activate_dev(pdev); if (err < 0) { - snd_printk(KERN_ERR - "CMI8330/C3D (MPU-401) PnP configure failure\n"); + snd_printk(KERN_ERR "MPU-401 PnP configure failure\n"); return -EBUSY; } mpuport[dev] = pnp_port_start(pdev, 0); @@ -430,9 +443,9 @@ snd_cmi8330_capture_open };
- if ((err = snd_pcm_new(card, "CMI8330", 0, 1, 1, &pcm)) < 0) + if ((err = snd_pcm_new(card, (chip->type == CMI8329) ? "CMI8329" : "CMI8330", 0, 1, 1, &pcm)) < 0) return err; - strcpy(pcm->name, "CMI8330"); + strcpy(pcm->name, (chip->type == CMI8329) ? "CMI8329" : "CMI8330"); pcm->private_data = chip; /* SB16 */ @@ -527,11 +540,11 @@ wssdma[dev], -1, WSS_HW_DETECT, 0, &acard->wss); if (err < 0) { - snd_printk(KERN_ERR PFX "(AD1848) device busy??\n"); + snd_printk(KERN_ERR PFX "AD1848 device busy??\n"); return err; } if (acard->wss->hardware != WSS_HW_CMI8330) { - snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n"); + snd_printk(KERN_ERR PFX "AD1848 not found during probe\n"); return -ENODEV; }
@@ -541,11 +554,11 @@ sbdma8[dev], sbdma16[dev], SB_HW_AUTO, &acard->sb)) < 0) { - snd_printk(KERN_ERR PFX "(SB16) device busy??\n"); + snd_printk(KERN_ERR PFX "SB16 device busy??\n"); return err; } if (acard->sb->hardware != SB_HW_16) { - snd_printk(KERN_ERR PFX "(SB16) not found during probe\n"); + snd_printk(KERN_ERR PFX "SB16 not found during probe\n"); return err; }
@@ -585,8 +598,8 @@ mpuport[dev]); }
- strcpy(card->driver, "CMI8330/C3D"); - strcpy(card->shortname, "C-Media CMI8330/C3D"); + strcpy(card->driver, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D"); + strcpy(card->shortname, (acard->type == CMI8329) ? "C-Media CMI8329" : "C-Media CMI8330/C3D"); sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d", card->shortname, acard->wss->port,