On Wed, 07 Aug 2024 09:55:40 +0200, Shenghao Ding wrote:
From: Baojun Xu baojun.xu@ti.com
Wrong calibration data order cause sound too low in some device. Fix wrong calibrated data order, add calibration data converssion by get_unaligned_be32() after reading from UEFI.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by: Baojun Xu baojun.xu@ti.com
v1:
- Change copyright date, and add new maintainer.
- Add unaligned.h included for get_unaligned_be32().
- In tas2781_apply_calib(), change data address transfer directly to get data by get_unaligned_be32(), and send address to device.
sound/pci/hda/tas2781_hda_i2c.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 49bd7097d..4dc3350d5 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,10 +2,12 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 Texas Instruments, Inc. +// Copyright 2023 - 2024 Texas Instruments, Inc. // // Author: Shenghao Ding shenghao-ding@ti.com +// Current maintainer: Baojun Xu baojun.xu@ti.com
+#include <asm/unaligned.h> #include <linux/acpi.h> #include <linux/crc8.h> #include <linux/crc32.h> @@ -519,20 +521,21 @@ static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) static const unsigned char rgno_array[CALIB_MAX] = { 0x74, 0x0c, 0x14, 0x70, 0x7c, };
- unsigned char *data;
- int i, j, rc;
- int i, j, rc, data;
- int offset = 0;
data should be __be32 type, to be more explicit.
Takashi
for (i = 0; i < tas_priv->ndev; i++) {
data = tas_priv->cali_data.data +i * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
data = get_unaligned_be32(&tas_priv->cali_data.data[offset]); rc = tasdevice_dev_bulk_write(tas_priv, i, TASDEVICE_REG(0, page_array[j], rgno_array[j]),
&(data[4 * j]), 4);
(unsigned char *)&data, 4); if (rc < 0) dev_err(tas_priv->dev, "chn %d calib %d bulk_wr err = %d\n", i, j, rc);offset += 4;}
2.40.1