-----Original Message----- From: Mark Brown [mailto:broonie@kernel.org] Sent: Wednesday, July 15, 2015 7:57 PM To: Nicolas Boichat Cc: Bard Liao; Oder Chiou; Liam Girdwood; Jaroslav Kysela; Takashi Iwai; alsa-devel@alsa-project.org; koro.chen@mediatek.com Subject: Re: [PATCH v2 1/3] ASoC: rt5645: Simplify rt5645_enable_push_button_irq
On Wed, Jul 15, 2015 at 07:50:50PM +0800, Nicolas Boichat wrote:
Thanks for the review. I think what we need is something like
snd_soc_dapm_force_enable_pin(dapm, "ADC Lpower");
snd_soc_dapm_force_enable_pin(dapm, "ADC Rpower");
snd_soc_dapm_sync(dapm);if (!codec->component.card->instantiated) {regmap_update_bits(rt5645->regmap,RT5645_PWR_DIG1,
RT5645_PWR_ADC_L_BIT |RT5645_PWR_ADC_R_BIT,
RT5645_PWR_ADC_L_BIT |RT5645_PWR_ADC_R_BIT);
}Just to make sure I understand... With the code above, the dapm state is consistent. However, DAPM will only set the regmap bits when the card is instantiated. So why do we still need to update the regmap? To make sure we do not miss an early jack/button event? Or would we still get jack irq if the pins are enabled a little later? (I guess we can live with missing a button event at that stage, but we need the jack state to be correct)
I'm assuming it's something to do with early detection, I don't really know though.
I think the problem is dapm won't update the bits if card is not instantiated. And those bits are necessary for the jack or button detect functions. Without these bits, we may not get irq properly. That's why we need to update those bits manually.
------Please consider the environment before printing this e-mail.