From: Stefan Binding sbinding@opensource.cirrus.com
Speaker Calibration data, specific to an individual speaker is stored inside UEFI variables during calibration, and can be used by the DSP.
Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com Signed-off-by: Vitaly Rodionov vitalyr@opensource.cirrus.com ---
Changes since v2: - Fixed building without CONFIG_EFI
Changes since v3: - Apply all 4 calibration parameters after fw download
sound/pci/hda/cs35l41_hda.c | 63 +++++++++++++++++++++++++++++++++++++ sound/pci/hda/cs35l41_hda.h | 15 +++++++++ 2 files changed, 78 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c index 9c622104bf01..b4087d548646 100644 --- a/sound/pci/hda/cs35l41_hda.c +++ b/sound/pci/hda/cs35l41_hda.c @@ -26,6 +26,12 @@ #define HALO_STATE_DSP_CTL_NAME "HALO_STATE" #define HALO_STATE_DSP_CTL_TYPE 5 #define HALO_STATE_DSP_CTL_ALG 262308 +#define CAL_R_DSP_CTL_NAME "CAL_R" +#define CAL_STATUS_DSP_CTL_NAME "CAL_STATUS" +#define CAL_CHECKSUM_DSP_CTL_NAME "CAL_CHECKSUM" +#define CAL_AMBIENT_DSP_CTL_NAME "CAL_AMBIENT" +#define CAL_DSP_CTL_TYPE 5 +#define CAL_DSP_CTL_ALG 205
static const struct reg_sequence cs35l41_hda_config[] = { { CS35L41_PLL_CLK_CTRL, 0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1 @@ -282,6 +288,96 @@ static int cs35l41_request_firmware_files(struct cs35l41_hda *cs35l41, return ret; }
+#if IS_ENABLED(CONFIG_EFI) +static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41, unsigned int ambient, + unsigned int r0, unsigned int status, unsigned int checksum) +{ + int ret; + + ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_AMBIENT_DSP_CTL_NAME, CAL_DSP_CTL_TYPE, + CAL_DSP_CTL_ALG, &ambient, 4); + if (ret) { + dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_AMBIENT_DSP_CTL_NAME, + ret); + return ret; + } + ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME, CAL_DSP_CTL_TYPE, + CAL_DSP_CTL_ALG, &r0, 4); + if (ret) { + dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_R_DSP_CTL_NAME, ret); + return ret; + } + ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_STATUS_DSP_CTL_NAME, CAL_DSP_CTL_TYPE, + CAL_DSP_CTL_ALG, &status, 4); + if (ret) { + dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_STATUS_DSP_CTL_NAME, + ret); + return ret; + } + ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_CHECKSUM_DSP_CTL_NAME, CAL_DSP_CTL_TYPE, + CAL_DSP_CTL_ALG, &checksum, 4); + if (ret) { + dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_CHECKSUM_DSP_CTL_NAME, + ret); + return ret; + } + + return 0; +} + +static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41) +{ + static efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, + 0x5a, 0xa3, 0x5d, 0xb3); + static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData"; + const struct cs35l41_amp_efi_data *efi_data; + const struct cs35l41_amp_cal_data *cl; + unsigned long data_size = 0; + efi_status_t status; + int ret = 0; + u8 *data = NULL; + u32 attr; + + /* Get real size of UEFI variable */ + status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data); + if (status == EFI_BUFFER_TOO_SMALL) { + ret = -ENODEV; + /* Allocate data buffer of data_size bytes */ + data = vmalloc(data_size); + if (!data) + return -ENOMEM; + /* Get variable contents into buffer */ + status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data); + if (status == EFI_SUCCESS) { + efi_data = (struct cs35l41_amp_efi_data *)data; + dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n", + efi_data->size, efi_data->count); + if (efi_data->count > cs35l41->index) { + cl = &efi_data->data[cs35l41->index]; + dev_dbg(cs35l41->dev, + "Calibration: Ambient=%02x, Status=%02x, R0=%d\n", + cl->calAmbient, cl->calStatus, cl->calR); + + /* Calibration can only be applied whilst the DSP is not running */ + ret = cs35l41_apply_calibration(cs35l41, + cpu_to_be32(cl->calAmbient), + cpu_to_be32(cl->calR), + cpu_to_be32(cl->calStatus), + cpu_to_be32(cl->calR + 1)); + } + } + vfree(data); + } + return ret; +} +#else +static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41) +{ + dev_warn(cs35l41->dev, "Calibration not supported without EFI support.\n"); + return 0; +} +#endif + static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41) { const struct firmware *coeff_firmware = NULL; @@ -314,7 +410,12 @@ static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
ret = cs_dsp_power_up(dsp, wmfw_firmware, wmfw_filename, coeff_firmware, coeff_filename, FW_NAME); + if (ret) + goto err_release; + + ret = cs35l41_save_calibration(cs35l41);
+err_release: if (wmfw_firmware) release_firmware(wmfw_firmware); if (coeff_firmware) diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h index 54521a013e78..3cf9871fbed2 100644 --- a/sound/pci/hda/cs35l41_hda.h +++ b/sound/pci/hda/cs35l41_hda.h @@ -10,6 +10,7 @@ #ifndef __CS35L41_HDA_H__ #define __CS35L41_HDA_H__
+#include <linux/efi.h> #include <linux/regulator/consumer.h> #include <linux/gpio/consumer.h> #include <linux/device.h> @@ -18,6 +19,20 @@ #include <linux/firmware/cirrus/cs_dsp.h> #include <linux/firmware/cirrus/wmfw.h>
+struct cs35l41_amp_cal_data { + u32 calTarget[2]; + u32 calTime[2]; + s8 calAmbient; + u8 calStatus; + u16 calR; +} __packed; + +struct cs35l41_amp_efi_data { + u32 size; + u32 count; + struct cs35l41_amp_cal_data data[]; +} __packed; + enum cs35l41_hda_spk_pos { CS35l41_LEFT, CS35l41_RIGHT,