2011/5/2 Takashi Iwai tiwai@suse.de
At Mon, 2 May 2011 10:06:15 +0800, Raymond Yau wrote:
2011/4/30 Takashi Iwai tiwai@suse.de
This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases.
Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported.
Signed-off-by: Takashi Iwai tiwai@suse.de
Why the line out become "speaker" for G41M-ES2L with 3 audio jacks at
rear
panel ? The driver won't create "Channel Mode" control and it cannot support surround51
It's just because of pin fixup that I'm going to revert.
Even revert the pin config, and distable auto mute,
the channel mode still allow 2, 4 or 6 channels
IT seem that there is no way to use "HP" as "Side" to support surround 7.1 as mentioned in the user manual (Chapter 5 Appendix)
5-1-1 Configuring 2/4/5.1/7.1-Channel Audio