is_sys_clk_from_pll() is used as a snd_soc_dapm_route.connected callback, checking RT5640_GBL_CLK to determine if the sys-clk is PLL1 and thus the PWR_PLL bit in reg PWR_ANLG2 must be set.
RT5640_GBL_CLK is changed by rt5640_set_dai_sysclk(), which gets called by the pre_pmu / post_pmd functions of the "Platform Clock" dapm-supply.
This creates an ordering issue, during a dapm transition first all connected() callbacks are called to build a list of supplies to enable and then the complete list is walked to enable the supplies. Since the connected() check happens before enabling any supplies, is_sys_clk_from_pll() ends up deciding if the PWR_PLL bit should be set based on the state the "Platform Clock" supply had *before* the transition. This sometimes results in PWR_PLL being off, even though *after* the transition PLL1 is configured as sys-clk.
This commit removes is_sys_clk_from_pll() instead simply setting / clearing PWR_PLL in rt5640_set_dai_sysclk() based on the selected sys-clk, which fixes this and as a bonus results in a nice cleanup.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/codecs/rt5640.c | 29 ++++------------------------- 1 file changed, 4 insertions(+), 25 deletions(-)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 05567426f211..140bad07429e 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -476,20 +476,6 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w, return idx; }
-static int is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, - struct snd_soc_dapm_widget *sink) -{ - struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm); - unsigned int val; - - val = snd_soc_component_read32(component, RT5640_GLB_CLK); - val &= RT5640_SCLK_SRC_MASK; - if (val == RT5640_SCLK_SRC_PLL1) - return 1; - else - return 0; -} - static int is_using_asrc(struct snd_soc_dapm_widget *source, struct snd_soc_dapm_widget *sink) { @@ -1071,9 +1057,6 @@ static int rt5640_hp_post_event(struct snd_soc_dapm_widget *w, }
static const struct snd_soc_dapm_widget rt5640_dapm_widgets[] = { - SND_SOC_DAPM_SUPPLY("PLL1", RT5640_PWR_ANLG2, - RT5640_PWR_PLL_BIT, 0, NULL, 0), - /* ASRC */ SND_SOC_DAPM_SUPPLY_S("Stereo Filter ASRC", 1, RT5640_ASRC_1, 15, 0, NULL, 0), @@ -1427,22 +1410,18 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = { {"Stereo ADC MIXL", "ADC1 Switch", "Stereo ADC L1 Mux"}, {"Stereo ADC MIXL", "ADC2 Switch", "Stereo ADC L2 Mux"}, {"Stereo ADC MIXL", NULL, "Stereo Filter"}, - {"Stereo Filter", NULL, "PLL1", is_sys_clk_from_pll},
{"Stereo ADC MIXR", "ADC1 Switch", "Stereo ADC R1 Mux"}, {"Stereo ADC MIXR", "ADC2 Switch", "Stereo ADC R2 Mux"}, {"Stereo ADC MIXR", NULL, "Stereo Filter"}, - {"Stereo Filter", NULL, "PLL1", is_sys_clk_from_pll},
{"Mono ADC MIXL", "ADC1 Switch", "Mono ADC L1 Mux"}, {"Mono ADC MIXL", "ADC2 Switch", "Mono ADC L2 Mux"}, {"Mono ADC MIXL", NULL, "Mono Left Filter"}, - {"Mono Left Filter", NULL, "PLL1", is_sys_clk_from_pll},
{"Mono ADC MIXR", "ADC1 Switch", "Mono ADC R1 Mux"}, {"Mono ADC MIXR", "ADC2 Switch", "Mono ADC R2 Mux"}, {"Mono ADC MIXR", NULL, "Mono Right Filter"}, - {"Mono Right Filter", NULL, "PLL1", is_sys_clk_from_pll},
{"IF2 ADC L", NULL, "Mono ADC MIXL"}, {"IF2 ADC R", NULL, "Mono ADC MIXR"}, @@ -1512,10 +1491,8 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = { {"DIG MIXR", "DAC R1 Switch", "DAC MIXR"},
{"DAC L1", NULL, "Stereo DAC MIXL"}, - {"DAC L1", NULL, "PLL1", is_sys_clk_from_pll}, {"DAC L1", NULL, "DAC L1 Power"}, {"DAC R1", NULL, "Stereo DAC MIXR"}, - {"DAC R1", NULL, "PLL1", is_sys_clk_from_pll}, {"DAC R1", NULL, "DAC R1 Power"},
{"SPK MIXL", "REC MIXL Switch", "RECMIXL"}, @@ -1622,10 +1599,8 @@ static const struct snd_soc_dapm_route rt5640_specific_dapm_routes[] = { {"DIG MIXL", "DAC L2 Switch", "DAC L2 Mux"},
{"DAC L2", NULL, "Mono DAC MIXL"}, - {"DAC L2", NULL, "PLL1", is_sys_clk_from_pll}, {"DAC L2", NULL, "DAC L2 Power"}, {"DAC R2", NULL, "Mono DAC MIXR"}, - {"DAC R2", NULL, "PLL1", is_sys_clk_from_pll}, {"DAC R2", NULL, "DAC R2 Power"},
{"SPK MIXL", "DAC L2 Switch", "DAC L2"}, @@ -1861,6 +1836,7 @@ static int rt5640_set_dai_sysclk(struct snd_soc_dai *dai, struct snd_soc_component *component = dai->component; struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component); unsigned int reg_val = 0; + unsigned int pll_bit = 0;
if (freq == rt5640->sysclk && clk_id == rt5640->sysclk_src) return 0; @@ -1871,6 +1847,7 @@ static int rt5640_set_dai_sysclk(struct snd_soc_dai *dai, break; case RT5640_SCLK_S_PLL1: reg_val |= RT5640_SCLK_SRC_PLL1; + pll_bit |= RT5640_PWR_PLL; break; case RT5640_SCLK_S_RCCLK: reg_val |= RT5640_SCLK_SRC_RCCLK; @@ -1879,6 +1856,8 @@ static int rt5640_set_dai_sysclk(struct snd_soc_dai *dai, dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); return -EINVAL; } + snd_soc_component_update_bits(component, RT5640_PWR_ANLG2, + RT5640_PWR_PLL, pll_bit); snd_soc_component_update_bits(component, RT5640_GLB_CLK, RT5640_SCLK_SRC_MASK, reg_val); rt5640->sysclk = freq;