On Monday 17 September 2007 07:21:03 Giovanni Maruzzelli wrote:
Hi all,
I hope someone can give me an hint on this problem, that is stopping me.
On my new laptop (asus f5v) dsnoop do not works, neither I can record at the same moment with more than one application. The second application that want to use the dsnoop, fail to open it.
I'm using Ubuntu 7.04 fully updated.
lspci gives: 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
cat /proc/asound/card0/codec#* | grep Codec gives: Codec: Realtek ALC660-VD Codec: Motorola Si3054
I've upgraded driver, lib, and utils to 1.0.14 but it do not helped.
I've put at the end of /etc/modprobe.d/alsa-base options snd-hda-intel model=3stack-660
I can always reproduce the behavior, for eg:
root@ubuntu-lap:~# arecord -Ddefault ciao.wav & [1] 6923 root@ubuntu-lap:~# Recording WAVE 'ciao.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
root@ubuntu-lap:~# arecord -Ddefault ciao2.wav & [2] 6926 root@ubuntu-lap:~# ALSA lib pcm_dsnoop.c:606:(snd_pcm_dsnoop_open) unable to open slave arecord: main:545: audio open error: Invalid argument
[2]+ Exit 1 arecord -Ddefault ciao2.wav
I can give any additional info is needed.
Thank you all in advance,
Giovanni Maruzzelli _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi,
I was also hit by this problem
To fix this you need to open /usr/share/alsa/pcm/dsnoop.conf and change
@args.SUBDEV { type string default -1
to
@args.SUBDEV { type string default 0
I was told that this is a feature of alsa, not bug, I don't know.
the above will make dsnoop to record from hw:0,0
Also, I bet that your hardware can record more that one stream a time. So you can also try recording from hw:0,1 or hw:0,2
you can check how many streams can be recording at same time in /proc/asound/Intel/pcm0c/info look at subdevices_count
Each stream can have its own input source, so check your mixer to make sure that each stream records what you want, eg: records from same source, or not, is enabled or not, and has enough gain.
Best regards, Maxim Levisky