Re: [PATCH] dt-bindings: More whitespace clean-ups in schema files

On Fri, 23 Oct 2020 14:22:58 -0500 Rob Herring robh@kernel.org wrote:

Clean-up incorrect indentation, extra spaces, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword.

Found with yamllint (now integrated into the checks).

Cc: linux-arm-kernel@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-gpio@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Rob Herring robh@kernel.org

Acked-by: Jonathan Cameron Jonathan.Cameron@huawei.com #for-iio

---

.../display/bridge/toshiba,tc358775.yaml | 18 ++-- .../display/panel/ilitek,ili9881c.yaml | 5 +- .../devicetree/bindings/eeprom/at25.yaml | 6 +- .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 4 +- .../devicetree/bindings/i2c/ingenic,i2c.yaml | 8 +- .../bindings/iio/adc/adi,ad7291.yaml | 3 +- .../bindings/iio/adc/adi,ad7768-1.yaml | 3 +- .../bindings/iio/adc/cosmic,10001-adc.yaml | 4 +- .../bindings/iio/adc/holt,hi8435.yaml | 2 +- .../interrupt-controller/ti,pruss-intc.yaml | 12 +-- .../devicetree/bindings/mfd/ene-kb3930.yaml | 2 +- .../devicetree/bindings/mmc/arasan,sdhci.yaml | 8 +- .../devicetree/bindings/mmc/sdhci-am654.yaml | 15 ++- .../pci/socionext,uniphier-pcie-ep.yaml | 18 ++-- .../phy/socionext,uniphier-ahci-phy.yaml | 6 +- .../devicetree/bindings/phy/ti,omap-usb2.yaml | 20 ++-- .../pinctrl/actions,s500-pinctrl.yaml | 102 +++++++++--------- .../bindings/pinctrl/pinctrl-mt8192.yaml | 2 +- .../pinctrl/qcom,msm8226-pinctrl.yaml | 6 +- .../pinctrl/toshiba,visconti-pinctrl.yaml | 24 ++--- .../bindings/power/reset/reboot-mode.yaml | 6 +- .../power/supply/ingenic,battery.yaml | 8 +- .../power/supply/summit,smb347-charger.yaml | 16 +-- .../bindings/riscv/sifive-l2-cache.yaml | 4 +- .../devicetree/bindings/rng/imx-rng.yaml | 6 +- .../bindings/serial/fsl-imx-uart.yaml | 34 +++--- .../bindings/sound/mchp,spdifrx.yaml | 4 +- .../bindings/sound/mchp,spdiftx.yaml | 4 +- .../bindings/sound/qcom,lpass-cpu.yaml | 40 +++---- .../devicetree/bindings/timer/arm,sp804.yaml | 12 +-- .../devicetree/bindings/usb/cdns,usb3.yaml | 4 +- .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +- .../devicetree/bindings/w1/fsl-imx-owire.yaml | 8 +- 33 files changed, 210 insertions(+), 206 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml index 31f085d8ab13..526bbd63924b 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Toshiba TC358775 DSI to LVDS bridge bindings

maintainers:

• • Vinay Simha BN simhavcs@gmail.com

• • Vinay Simha BN simhavcs@gmail.com

description: | This binding supports DSI to LVDS bridge TC358775 @@ -29,7 +29,7 @@ properties:

vdd-supply: maxItems: 1

• description: 1.2V LVDS Power Supply

• description: 1.2V LVDS Power Supply

  vddio-supply: maxItems: 1

@@ -77,13 +77,13 @@ properties: - port@1

required:

• • compatible
• • reg
• • vdd-supply
• • vddio-supply
• • stby-gpios
• • reset-gpios
• • ports

• • compatible
• • reg
• • vdd-supply
• • vddio-supply
• • stby-gpios
• • reset-gpios
• • ports

examples:

• |

diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index c60b3bd74337..b2fcec4f22fd 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -13,9 +13,8 @@ properties: compatible: items: - enum:

•    - bananapi,lhr050h41
  

•    - feixin,k101-im2byl02
  

•      - bananapi,lhr050h41
  

•      - feixin,k101-im2byl02
   - const: ilitek,ili9881c
  
  

  backlight: true

diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 9810619a2b5c..744973637678 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -81,14 +81,14 @@ properties: at25,byte-len: $ref: /schemas/types.yaml#/definitions/uint32 description:

•   Total eeprom size in bytes. Deprecated, use "size" property instead.
  

•  Total eeprom size in bytes. Deprecated, use "size" property instead.
  

  deprecated: true

  at25,addr-mode: $ref: /schemas/types.yaml#/definitions/uint32 description:

•   Addr-mode flags, as defined in include/linux/spi/eeprom.h.
  

•   Deprecated, use "address-width" property instead.
  

•  Addr-mode flags, as defined in include/linux/spi/eeprom.h.
  

•  Deprecated, use "address-width" property instead.
  

  deprecated: true

  at25,page-size:

diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml index e2d2c10e536a..b032471831e7 100644 --- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml @@ -43,8 +43,8 @@ properties: gpio-controller: true

gpio-line-names:

•  minItems: 1
  

•  maxItems: 8
  

• minItems: 1
• maxItems: 8

required:

• compatible

diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml index 0e7b4b8a7e48..e1e65eb4f795 100644 --- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml @@ -19,11 +19,11 @@ properties: compatible: oneOf: - enum:

•    - ingenic,jz4770-i2c
  

•    - ingenic,x1000-i2c
  

•      - ingenic,jz4770-i2c
  

•      - ingenic,x1000-i2c
   - items:
  

•    - const: ingenic,jz4780-i2c
  

•    - const: ingenic,jz4770-i2c
  

•      - const: ingenic,jz4780-i2c
  

•      - const: ingenic,jz4770-i2c
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml index 6feafb7e531e..930f9e3904d7 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml @@ -43,4 +43,5 @@ examples: vref-supply = <&adc_vref>; }; }; -... \ No newline at end of file +...

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index d3733ad8785a..8f32800fe5b7 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -46,7 +46,8 @@ properties: spi-max-frequency: true

spi-cpol: true

• spi-cpha : true

• spi-cpha: true

  "#io-channel-cells": const: 1

diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml index 5d92b477e23f..4e695b97d015 100644 --- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml @@ -22,8 +22,8 @@ properties: adc-reserved-channels: $ref: /schemas/types.yaml#/definitions/uint32 description:

•   Bitmask of reserved channels, i.e. channels that cannot be
  

•   used by the OS.
  

•  Bitmask of reserved channels, i.e. channels that cannot be
  

•  used by the OS.
  
  

  clocks: maxItems: 1

diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml index 9514c3381c42..52490cbb0af0 100644 --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -21,7 +21,7 @@ properties:

gpios: description:

•   GPIO used for controlling the reset pin
  

•  GPIO used for controlling the reset pin
  

  maxItems: 1

  spi-max-frequency: true

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml index bbf79d125675..1c4c009dedd0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -94,12 +94,12 @@ properties: instances.

required:

• • compatible
• • reg
• • interrupts
• • interrupt-names
• • interrupt-controller
• • "#interrupt-cells"

• • compatible
• • reg
• • interrupts
• • interrupt-names
• • interrupt-controller
• • "#interrupt-cells"

additionalProperties: false

diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml index 074243c40891..08af356f5d27 100644 --- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml @@ -17,7 +17,7 @@ properties: compatible: items: - enum:

•    - dell,wyse-ariel-ec  # Dell Wyse Ariel board (3020)
  

•      - dell,wyse-ariel-ec  # Dell Wyse Ariel board (3020)
   - const: ene,kb3930
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index 58fe9d02a781..0753289fba84 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -32,11 +32,11 @@ allOf: clock-output-names: oneOf: - items:

•          - const: clk_out_sd0
  

•          - const: clk_in_sd0
  

•            - const: clk_out_sd0
  

•            - const: clk_in_sd0
         - items:
  

•          - const: clk_out_sd1
  

•          - const: clk_in_sd1
  

•            - const: clk_out_sd1
  

•            - const: clk_in_sd1
  
  

properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index ac79f3adf20b..2cd859066462 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -3,7 +3,7 @@ %YAML 1.2

---

$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#" -$schema : "http://devicetree.org/meta-schemas/core.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#"

title: TI AM654 MMC Controller

@@ -163,13 +163,12 @@ properties: ti,driver-strength-ohm: description: DLL drive strength in ohms $ref: "/schemas/types.yaml#/definitions/uint32"

• oneOf:

•  - enum:
  

•    - 33
  

•    - 40
  

•    - 50
  

•    - 66
  

•    - 100
  

• enum:

•  - 33
  

•  - 40
  

•  - 50
  

•  - 66
  

•  - 100
  
  

  ti,strobe-sel: description: strobe select delay for HS400 speed mode.

diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml index f4292d2c54e3..d6cf8a560ef0 100644 --- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -29,16 +29,16 @@ properties: reg-names: oneOf: - items:

•    - const: dbi
  

•    - const: dbi2
  

•    - const: link
  

•    - const: addr_space
  

•      - const: dbi
  

•      - const: dbi2
  

•      - const: link
  

•      - const: addr_space
   - items:
  

•    - const: dbi
  

•    - const: dbi2
  

•    - const: link
  

•    - const: addr_space
  

•    - const: atu
  

•      - const: dbi
  

•      - const: dbi2
  

•      - const: link
  

•      - const: addr_space
  

•      - const: atu
  
  

  clocks: maxItems: 2

diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml index bab2ff4d9dc9..34756347a14e 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -31,10 +31,10 @@ properties: clock-names: oneOf: - items: # for PXs2

•    - const: link
  

•      - const: link
   - items:          # for others
  

•    - const: link
  

•    - const: phy
  

•      - const: link
  

•      - const: phy
  
  

  resets: maxItems: 2

diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml index 15207ca9548f..ab77a65c5c55 100644 --- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -7,23 +7,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: OMAP USB2 PHY

maintainers:

• • Kishon Vijay Abraham I kishon@ti.com
• • Roger Quadros rogerq@ti.com

• • Kishon Vijay Abraham I kishon@ti.com
• • Roger Quadros rogerq@ti.com

properties: compatible: oneOf: - items:

•    - enum:
  

•      - ti,dra7x-usb2
  

•      - ti,dra7x-usb2-phy2
  

•      - ti,am654-usb2
  

•    - enum:
  

•      - ti,omap-usb2
  

•      - enum:
  

•          - ti,dra7x-usb2
  

•          - ti,dra7x-usb2-phy2
  

•          - ti,am654-usb2
  

•      - enum:
  

•          - ti,omap-usb2
   - items:
  

•    - const: ti,am437x-usb2
  

•      - const: ti,am437x-usb2
   - items:
  

•    - const: ti,omap-usb2
  

•      - const: ti,omap-usb2
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml index 33391d30c00c..ccdd9e3820d7 100644 --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml @@ -76,22 +76,22 @@ patternProperties: items: oneOf: - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,

•                rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
  

•                rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
  

•                i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
  

•                ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
  

•                ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
  

•                dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
  

•                dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
  

•                spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
  

•                dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
  

•                uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
  

•                sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
  

•                uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
  

•                uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
  

•                pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
  

•                dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
  

•                nand_ceb3_mfp]
  

•                     rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
  

•                     rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
  

•                     i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
  

•                     ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
  

•                     ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
  

•                     dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
  

•                     dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
  

•                     spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
  

•                     dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
  

•                     uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
  

•                     sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
  

•                     uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
  

•                     uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
  

•                     pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
  

•                     dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
  

•                     nand_ceb3_mfp]
         minItems: 1
         maxItems: 32
  
  

@@ -100,10 +100,10 @@ patternProperties: Specify the alternative function to be configured for the given gpio pin groups. enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,

•          sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
  

•          i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
  

•          p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
  

•          mipi_csi, nand, spdif, ts, lcd0]
  

•               sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
  

•               i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
  

•               p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
  

•               mipi_csi, nand, spdif, ts, lcd0]
  
     required:
       - groups
  

@@ -126,14 +126,14 @@ patternProperties: items: oneOf: - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,

•                rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
  

•                smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
  

•                i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
  

•                lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
  

•                sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
  

•                spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
  

•                i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
  

•                sens0_ckout_drv, uart3_all_drv]
  

•                     rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
  

•                     smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
  

•                     i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
  

•                     lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
  

•                     sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
  

•                     spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
  

•                     i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
  

•                     sens0_ckout_drv, uart3_all_drv]
         minItems: 1
         maxItems: 32
  
  

@@ -144,29 +144,29 @@ patternProperties: items: oneOf: - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,

•                eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
  

•                eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
  

•                i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
  

•                i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
  

•                ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
  

•                lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
  

•                lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
  

•                lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
  

•                dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
  

•                dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
  

•                sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
  

•                spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
  

•                uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
  

•                sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
  

•                dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
  

•                uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
  

•                pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
  

•                i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
  

•                csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
  

•                csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
  

•                dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
  

•                dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
  

•                pkg2, pkg3]
  

•                     eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
  

•                     eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
  

•                     i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
  

•                     i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
  

•                     ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
  

•                     lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
  

•                     lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
  

•                     lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
  

•                     dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
  

•                     dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
  

•                     sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
  

•                     spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
  

•                     uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
  

•                     sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
  

•                     dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
  

•                     uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
  

•                     pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
  

•                     i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
  

•                     csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
  

•                     csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
  

•                     dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
  

•                     dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
  

•                     pkg2, pkg3]
         minItems: 1
         maxItems: 64
  
  

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index 5556def6b99b..c4c071211611 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -106,7 +106,7 @@ patternProperties: required: - pinmux

• additionalProperties: false

• additionalProperties: false

required:

• compatible

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index 1f0f5757f9e1..040d2ada3669 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -71,9 +71,9 @@ patternProperties: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,

•      blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
  

•      blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
  

•      blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
  

•            blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
  

•            blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
  

•            blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
  
   drive-strength:
     enum: [2, 4, 6, 8, 10, 12, 14, 16]
  

diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml index d0d1a01140ea..9f1dab0c2430 100644 --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -40,24 +40,24 @@ patternProperties: Function to mux. $ref: "/schemas/types.yaml#/definitions/string" enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,

•      spi0, spi1, spi2, spi3, spi4, spi5, spi6,
  

•      uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
  

•           spi0, spi1, spi2, spi3, spi4, spi5, spi6,
  

•           uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
  
   groups:
     description:
       Name of the pin group to use for the functions.
     $ref: "/schemas/types.yaml#/definitions/string"
     enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
  

•      i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
  

•      spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
  

•      spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
  

•      uart0_grp, uart1_grp, uart2_grp, uart3_grp,
  

•      pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
  

•      pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
  

•      pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
  

•      pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
  

•      pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
  

•      pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
  

•           i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
  

•           spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
  

•           spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
  

•           uart0_grp, uart1_grp, uart2_grp, uart3_grp,
  

•           pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
  

•           pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
  

•           pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
  

•           pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
  

•           pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
  

•           pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
  
   drive-strength:
     enum: [2, 4, 6, 8, 16, 24, 32]
  

diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml index a6c91026d4cc..a2dca38577f7 100644 --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -28,9 +28,9 @@ description: |

properties: mode-normal:

•  $ref: /schemas/types.yaml#/definitions/uint32
  

•  description: |
  

•    Default value to set on a reboot if no command was provided.
  

• $ref: /schemas/types.yaml#/definitions/uint32
• description:

•  Default value to set on a reboot if no command was provided.
  
  

patternProperties: "^mode-.*$": diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml index 867e3e6b7e80..76c227a7cd5c 100644 --- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml @@ -15,10 +15,10 @@ properties: oneOf: - const: ingenic,jz4740-battery - items:

•    - enum:
  

•      - ingenic,jz4725b-battery
  

•      - ingenic,jz4770-battery
  

•    - const: ingenic,jz4740-battery
  

•      - enum:
  

•          - ingenic,jz4725b-battery
  

•          - ingenic,jz4770-battery
  

•      - const: ingenic,jz4740-battery
  
  

  io-channels: maxItems: 1

diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml index 193a23af2007..983fc215c1e5 100644 --- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml @@ -84,12 +84,12 @@ allOf: then: properties: summit,mains-current-limit-microamp:

•      enum: [ 300000,  500000,  700000, 1000000,
  

•             1500000, 1800000, 2000000]
  

•      enum: [ 300000, 500000, 700000, 1000000,
  

•              1500000, 1800000, 2000000]
  
     summit,usb-current-limit-microamp:
  

•      enum: [ 300000,  500000,  700000, 1000000,
  

•             1500000, 1800000, 2000000]
  

•      enum: [ 300000, 500000, 700000, 1000000,
  

•              1500000, 1800000, 2000000]
  
     summit,charge-current-compensation-microamp:
       enum: [200000, 450000, 600000, 900000]
  

@@ -97,12 +97,12 @@ allOf: else: properties: summit,mains-current-limit-microamp:

•      enum: [ 300000,  500000,  700000,  900000, 1200000,
  

•             1500000, 1800000, 2000000, 2200000, 2500000]
  

•      enum: [ 300000, 500000, 700000, 900000, 1200000,
  

•              1500000, 1800000, 2000000, 2200000, 2500000]
  
     summit,usb-current-limit-microamp:
  

•      enum: [ 300000,  500000,  700000,  900000, 1200000,
  

•             1500000, 1800000, 2000000, 2200000, 2500000]
  

•      enum: [ 300000, 500000, 700000, 900000, 1200000,
  

•              1500000, 1800000, 2000000, 2200000, 2500000]
  
     summit,charge-current-compensation-microamp:
       enum: [250000, 700000, 900000, 1200000]
  

diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index 3f4a1939554d..efc0198eeb74 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -25,8 +25,8 @@ select: properties: compatible: items:

•   - enum:
  

•      - sifive,fu540-c000-ccache
  

•    - enum:
  

•        - sifive,fu540-c000-ccache
  
  

  required:

  • compatible

diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml index 4ad1e456a801..07f6ff89bcc1 100644 --- a/Documentation/devicetree/bindings/rng/imx-rng.yaml +++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml @@ -19,9 +19,9 @@ properties: - const: fsl,imx21-rnga - items: - enum:

•        - fsl,imx6sl-rngb
  

•        - fsl,imx6sll-rngb
  

•        - fsl,imx6ull-rngb
  

•          - fsl,imx6sl-rngb
  

•          - fsl,imx6sll-rngb
  

•          - fsl,imx6ull-rngb
       - const: fsl,imx25-rngb
   - const: fsl,imx35-rngc
  
  

diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 9ff85bc6859c..9702c07a6b6c 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -20,30 +20,30 @@ properties: - const: fsl,imx21-uart - items: - enum:

•        - fsl,imx25-uart
  

•        - fsl,imx27-uart
  

•        - fsl,imx31-uart
  

•        - fsl,imx35-uart
  

•        - fsl,imx50-uart
  

•        - fsl,imx51-uart
  

•        - fsl,imx53-uart
  

•        - fsl,imx6q-uart
  

•          - fsl,imx25-uart
  

•          - fsl,imx27-uart
  

•          - fsl,imx31-uart
  

•          - fsl,imx35-uart
  

•          - fsl,imx50-uart
  

•          - fsl,imx51-uart
  

•          - fsl,imx53-uart
  

•          - fsl,imx6q-uart
       - const: fsl,imx21-uart
   - items:
       - enum:
  

•        - fsl,imx6sl-uart
  

•        - fsl,imx6sll-uart
  

•        - fsl,imx6sx-uart
  

•          - fsl,imx6sl-uart
  

•          - fsl,imx6sll-uart
  

•          - fsl,imx6sx-uart
       - const: fsl,imx6q-uart
       - const: fsl,imx21-uart
   - items:
       - enum:
  

•        - fsl,imx6ul-uart
  

•        - fsl,imx7d-uart
  

•        - fsl,imx8mm-uart
  

•        - fsl,imx8mn-uart
  

•        - fsl,imx8mp-uart
  

•        - fsl,imx8mq-uart
  

•          - fsl,imx6ul-uart
  

•          - fsl,imx7d-uart
  

•          - fsl,imx8mm-uart
  

•          - fsl,imx8mn-uart
  

•          - fsl,imx8mp-uart
  

•          - fsl,imx8mq-uart
       - const: fsl,imx6q-uart
  
  

  reg:

diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml index 7d8bd4e14434..4a2129005c0f 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml @@ -10,8 +10,8 @@ maintainers:

• Codrin Ciubotariu codrin.ciubotariu@microchip.com

description:

•    The Microchip Sony/Philips Digital Interface Receiver is a
  

•    serial port compliant with the IEC-60958 standard.
  

• The Microchip Sony/Philips Digital Interface Receiver is a serial port
• compliant with the IEC-60958 standard.

properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml index a03b0b871fc9..bdfb63387c53 100644 --- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml +++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml @@ -10,8 +10,8 @@ maintainers:

• Codrin Ciubotariu codrin.ciubotariu@microchip.com

description:

•    The Microchip Sony/Philips Digital Interface Transmitter is a
  

•    serial port compliant with the IEC-60958 standard.
  

• The Microchip Sony/Philips Digital Interface Transmitter is a serial port
• compliant with the IEC-60958 standard.

properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index f6f9fb49f385..1e23c0e20bc1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -26,8 +26,10 @@ properties: reg: maxItems: 2 description: LPAIF core registers

• reg-names:

• maxItems: 2
  

• maxItems: 2
• clocks: minItems: 3 maxItems: 6

@@ -39,8 +41,10 @@ properties: interrupts: maxItems: 2 description: LPAIF DMA buffer interrupt

• interrupt-names: maxItems: 2
• qcom,adsp: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle for the audio DSP node

@@ -141,31 +145,31 @@ allOf: properties: clock-names: oneOf:

•       - items:   #for I2S
  

•          - const: pcnoc-sway-clk
  

•          - const: audio-core
  

•          - const: mclk0
  

•          - const: pcnoc-mport-clk
  

•          - const: mi2s-bit-clk0
  

•          - const: mi2s-bit-clk1
  

•       - items:   #for HDMI
  

•          - const: pcnoc-sway-clk
  

•          - const: audio-core
  

•          - const: pcnoc-mport-clk
  

•        - items:   #for I2S
  

•            - const: pcnoc-sway-clk
  

•            - const: audio-core
  

•            - const: mclk0
  

•            - const: pcnoc-mport-clk
  

•            - const: mi2s-bit-clk0
  

•            - const: mi2s-bit-clk1
  

•        - items:   #for HDMI
  

•            - const: pcnoc-sway-clk
  

•            - const: audio-core
  

•            - const: pcnoc-mport-clk
     reg-names:
       anyOf:
         - items:   #for I2S
  

•          - const: lpass-lpaif
  

•            - const: lpass-lpaif
         - items:   #for I2S and HDMI
  

•          - const: lpass-hdmiif
  

•          - const: lpass-lpaif
  

•            - const: lpass-hdmiif
  

•            - const: lpass-lpaif
     interrupt-names:
       anyOf:
         - items:   #for I2S
  

•          - const: lpass-irq-lpaif
  

•            - const: lpass-irq-lpaif
         - items:   #for I2S and HDMI
  

•          - const: lpass-irq-lpaif
  

•          - const: lpass-irq-hdmi
  

•            - const: lpass-irq-lpaif
  

•            - const: lpass-irq-hdmi
   required:
     - iommus
     - power-domains
  

diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml index e35d3053250a..960e2bd66a97 100644 --- a/Documentation/devicetree/bindings/timer/arm,sp804.yaml +++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml @@ -33,8 +33,8 @@ properties: compatible: items: - enum:

•    - arm,sp804
  

•    - hisilicon,sp804
  

•      - arm,sp804
  

•      - hisilicon,sp804
   - const: arm,primecell
  
  

  interrupts:

@@ -58,11 +58,11 @@ properties: clock is used for all clock inputs. oneOf: - items:

•    - description: clock for timer 1
  

•    - description: clock for timer 2
  

•    - description: bus clock
  

•      - description: clock for timer 1
  

•      - description: clock for timer 2
  

•      - description: bus clock
   - items:
  

•    - description: unified clock for both timers and the bus
  

•      - description: unified clock for both timers and the bus
  
  

  clock-names: true # The original binding did not specify any clock names, and there is no

diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index ac20b98e9910..d6af2794d444 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -44,8 +44,8 @@ properties: enum: [super-speed, high-speed, full-speed]

phys:

• minItems: 1
• maxItems: 2

• minItems: 1

• maxItems: 2

  phy-names: minItems: 1

diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index 5fe9e6211ba2..52ceb07294a3 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -17,7 +17,7 @@ description: |-

properties: compatible:

• const: ti,hd3ss3220

• const: ti,hd3ss3220

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml index 1aaf3e768c81..55adea827c34 100644 --- a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml +++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml @@ -15,10 +15,10 @@ properties: - const: fsl,imx21-owire - items: - enum:

•        - fsl,imx27-owire
  

•        - fsl,imx50-owire
  

•        - fsl,imx51-owire
  

•        - fsl,imx53-owire
  

•          - fsl,imx27-owire
  

•          - fsl,imx50-owire
  

•          - fsl,imx51-owire
  

•          - fsl,imx53-owire
       - const: fsl,imx21-owire
  
  

  reg: