The codec driver takes care of this.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/omap/sdp3430.c | 18 ------------------ 1 file changed, 18 deletions(-)
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index f2e2651..216cbdd 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -24,7 +24,6 @@
#include <linux/clk.h> #include <linux/platform_device.h> -#include <linux/i2c/twl.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> @@ -32,20 +31,12 @@
#include <asm/mach-types.h> #include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/asoc-ti-mcbsp.h>
-/* Register descriptions for twl4030 codec part */ -#include <linux/mfd/twl4030-audio.h> #include <linux/module.h>
#include "omap-mcbsp.h" #include "omap-pcm.h"
-/* TWL4030 PMBR1 Register */ -#define TWL4030_INTBR_PMBR1 0x0D -/* TWL4030 PMBR1 Register GPIO6 mux bit */ -#define TWL4030_GPIO6_PWM0_MUTE(value) (value << 2) - static struct snd_soc_card snd_soc_sdp3430;
static int sdp3430_hw_params(struct snd_pcm_substream *substream, @@ -212,7 +203,6 @@ static struct platform_device *sdp3430_snd_device; static int __init sdp3430_soc_init(void) { int ret; - u8 pin_mux;
if (!machine_is_omap_3430sdp()) return -ENODEV; @@ -226,14 +216,6 @@ static int __init sdp3430_soc_init(void)
platform_set_drvdata(sdp3430_snd_device, &snd_soc_sdp3430);
- /* Set TWL4030 GPIO6 as EXTMUTE signal */ - twl_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux, - TWL4030_INTBR_PMBR1); - pin_mux &= ~TWL4030_GPIO6_PWM0_MUTE(0x03); - pin_mux |= TWL4030_GPIO6_PWM0_MUTE(0x02); - twl_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux, - TWL4030_INTBR_PMBR1); - ret = platform_device_add(sdp3430_snd_device); if (ret) goto err1;