Read temperature of the speaker and expose it via hwmon interface, which will be later used during calibration of speaker protection algorithms.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- sound/soc/codecs/wsa884x.c | 197 +++++++++++++++++++++++++++++++++++++ 1 file changed, 197 insertions(+)
diff --git a/sound/soc/codecs/wsa884x.c b/sound/soc/codecs/wsa884x.c index 7b19df9c1728..5f4acd66f942 100644 --- a/sound/soc/codecs/wsa884x.c +++ b/sound/soc/codecs/wsa884x.c @@ -5,11 +5,14 @@ */
#include <linux/bitfield.h> +#include <linux/cleanup.h> #include <linux/device.h> #include <linux/gpio/consumer.h> +#include <linux/hwmon.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> @@ -301,8 +304,28 @@ #define WSA884X_PA_FSM_MSK1 (WSA884X_DIG_CTRL0_BASE + 0x3b) #define WSA884X_PA_FSM_BYP_CTL (WSA884X_DIG_CTRL0_BASE + 0x3c) #define WSA884X_PA_FSM_BYP0 (WSA884X_DIG_CTRL0_BASE + 0x3d) +#define WSA884X_PA_FSM_BYP0_DC_CAL_EN_MASK 0x01 +#define WSA884X_PA_FSM_BYP0_DC_CAL_EN_SHIFT 0 +#define WSA884X_PA_FSM_BYP0_CLK_WD_EN_MASK 0x02 +#define WSA884X_PA_FSM_BYP0_CLK_WD_EN_SHIFT 1 +#define WSA884X_PA_FSM_BYP0_BG_EN_MASK 0x04 +#define WSA884X_PA_FSM_BYP0_BG_EN_SHIFT 2 +#define WSA884X_PA_FSM_BYP0_BOOST_EN_MASK 0x08 +#define WSA884X_PA_FSM_BYP0_BOOST_EN_SHIFT 3 +#define WSA884X_PA_FSM_BYP0_PA_EN_MASK 0x10 +#define WSA884X_PA_FSM_BYP0_PA_EN_SHIFT 4 +#define WSA884X_PA_FSM_BYP0_D_UNMUTE_MASK 0x20 +#define WSA884X_PA_FSM_BYP0_D_UNMUTE_SHIFT 5 +#define WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_MASK 0x40 +#define WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_SHIFT 6 +#define WSA884X_PA_FSM_BYP0_TSADC_EN_MASK 0x80 +#define WSA884X_PA_FSM_BYP0_TSADC_EN_SHIFT 7 #define WSA884X_PA_FSM_BYP1 (WSA884X_DIG_CTRL0_BASE + 0x3e) #define WSA884X_TADC_VALUE_CTL (WSA884X_DIG_CTRL0_BASE + 0x50) +#define WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK 0x01 +#define WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_SHIFT 0 +#define WSA884X_TADC_VALUE_CTL_VBAT_VALUE_RD_EN_MASK 0x02 +#define WSA884X_TADC_VALUE_CTL_VBAT_VALUE_RD_EN_SHIFT 1 #define WSA884X_TEMP_DETECT_CTL (WSA884X_DIG_CTRL0_BASE + 0x51) #define WSA884X_TEMP_DIN_MSB (WSA884X_DIG_CTRL0_BASE + 0x52) #define WSA884X_TEMP_DIN_LSB (WSA884X_DIG_CTRL0_BASE + 0x53) @@ -691,6 +714,17 @@ SNDRV_PCM_FMTBIT_S24_LE |\ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
+/* Two-point trimming for temperature calibration */ +#define WSA884X_T1_TEMP -10L +#define WSA884X_T2_TEMP 150L + +/* + * Device will report senseless data in many cases, so discard any measurements + * outside of valid range. + */ +#define WSA884X_LOW_TEMP_THRESHOLD 5 +#define WSA884X_HIGH_TEMP_THRESHOLD 45 + struct wsa884x_priv { struct regmap *regmap; struct device *dev; @@ -706,6 +740,13 @@ struct wsa884x_priv { int active_ports; int dev_mode; bool hw_init; + /* + * Protects temperature reading code (related to speaker protection) and + * fields: temperature and pa_on. + */ + struct mutex sp_lock; + unsigned int temperature; + bool pa_on; };
enum { @@ -1650,6 +1691,10 @@ static int wsa884x_spkr_event(struct snd_soc_dapm_widget *w,
switch (event) { case SND_SOC_DAPM_POST_PMU: + mutex_lock(&wsa884x->sp_lock); + wsa884x->pa_on = true; + mutex_unlock(&wsa884x->sp_lock); + wsa884x_spkr_post_pmu(component, wsa884x);
snd_soc_component_write_field(component, WSA884X_PDM_WD_CTL, @@ -1661,6 +1706,10 @@ static int wsa884x_spkr_event(struct snd_soc_dapm_widget *w, snd_soc_component_write_field(component, WSA884X_PDM_WD_CTL, WSA884X_PDM_WD_CTL_PDM_WD_EN_MASK, 0x0); + + mutex_lock(&wsa884x->sp_lock); + wsa884x->pa_on = false; + mutex_unlock(&wsa884x->sp_lock); break; }
@@ -1800,6 +1849,144 @@ static struct snd_soc_dai_driver wsa884x_dais[] = { }, };
+static int wsa884x_get_temp(struct wsa884x_priv *wsa884x, long *temp) +{ + unsigned int d1_msb = 0, d1_lsb = 0, d2_msb = 0, d2_lsb = 0; + unsigned int dmeas_msb = 0, dmeas_lsb = 0; + int d1, d2, dmeas; + unsigned int mask; + long val; + int ret; + + guard(mutex)(&wsa884x->sp_lock); + + if (wsa884x->pa_on) { + /* + * Reading temperature is possible only when Power Amplifier is + * off. Report last cached data. + */ + *temp = wsa884x->temperature; + return 0; + } + + ret = pm_runtime_resume_and_get(wsa884x->dev); + if (ret < 0) + return ret; + + mask = WSA884X_PA_FSM_BYP0_DC_CAL_EN_MASK | + WSA884X_PA_FSM_BYP0_CLK_WD_EN_MASK | + WSA884X_PA_FSM_BYP0_BG_EN_MASK | + WSA884X_PA_FSM_BYP0_D_UNMUTE_MASK | + WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_MASK | + WSA884X_PA_FSM_BYP0_TSADC_EN_MASK; + /* + * Here and further do not care about read or update failures. + * For example, before turning on Power Amplifier for the first + * time, reading WSA884X_TEMP_DIN_MSB will always return 0. + * Instead, check if returned value is within reasonable + * thresholds. + */ + regmap_update_bits(wsa884x->regmap, WSA884X_PA_FSM_BYP0, mask, mask); + + regmap_update_bits(wsa884x->regmap, WSA884X_TADC_VALUE_CTL, + WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, + FIELD_PREP(WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, 0x0)); + + regmap_read(wsa884x->regmap, WSA884X_TEMP_DIN_MSB, &dmeas_msb); + regmap_read(wsa884x->regmap, WSA884X_TEMP_DIN_LSB, &dmeas_lsb); + + regmap_update_bits(wsa884x->regmap, WSA884X_TADC_VALUE_CTL, + WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, + FIELD_PREP(WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, 0x1)); + + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_1, &d1_msb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_2, &d1_lsb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_3, &d2_msb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_4, &d2_lsb); + + regmap_update_bits(wsa884x->regmap, WSA884X_PA_FSM_BYP0, mask, 0x0); + + dmeas = (((dmeas_msb & 0xff) << 0x8) | (dmeas_lsb & 0xff)) >> 0x6; + d1 = (((d1_msb & 0xff) << 0x8) | (d1_lsb & 0xff)) >> 0x6; + d2 = (((d2_msb & 0xff) << 0x8) | (d2_lsb & 0xff)) >> 0x6; + + if (d1 == d2) { + /* Incorrect data in OTP? */ + ret = -EINVAL; + goto out; + } + + val = WSA884X_T1_TEMP + (((dmeas - d1) * (WSA884X_T2_TEMP - WSA884X_T1_TEMP))/(d2 - d1)); + + dev_dbg(wsa884x->dev, "Measured temp %ld (dmeas=%d, d1=%d, d2=%d)\n", + val, dmeas, d1, d2); + + if ((val > WSA884X_LOW_TEMP_THRESHOLD) && + (val < WSA884X_HIGH_TEMP_THRESHOLD)) { + wsa884x->temperature = val; + *temp = val; + ret = 0; + } else { + ret = -EAGAIN; + } + +out: + pm_runtime_mark_last_busy(wsa884x->dev); + pm_runtime_put_autosuspend(wsa884x->dev); + + return ret; +} + +static umode_t wsa884x_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, u32 attr, + int channel) +{ + if (type != hwmon_temp) + return 0; + + switch (attr) { + case hwmon_temp_input: + return 0444; + default: + break; + } + + return 0; +} + +static int wsa884x_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, long *temp) +{ + int ret; + + switch (attr) { + case hwmon_temp_input: + ret = wsa884x_get_temp(dev_get_drvdata(dev), temp); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static const struct hwmon_channel_info *const wsa884x_hwmon_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static const struct hwmon_ops wsa884x_hwmon_ops = { + .is_visible = wsa884x_hwmon_is_visible, + .read = wsa884x_hwmon_read, +}; + +static const struct hwmon_chip_info wsa884x_hwmon_chip_info = { + .ops = &wsa884x_hwmon_ops, + .info = wsa884x_hwmon_info, +}; + static void wsa884x_reset_powerdown(void *data) { struct wsa884x_priv *wsa884x = data; @@ -1849,6 +2036,7 @@ static int wsa884x_probe(struct sdw_slave *pdev, { struct device *dev = &pdev->dev; struct wsa884x_priv *wsa884x; + struct device *hwmon; unsigned int i; int ret;
@@ -1856,6 +2044,8 @@ static int wsa884x_probe(struct sdw_slave *pdev, if (!wsa884x) return -ENOMEM;
+ mutex_init(&wsa884x->sp_lock); + for (i = 0; i < WSA884X_SUPPLIES_NUM; i++) wsa884x->supplies[i].supply = wsa884x_supply_name[i];
@@ -1913,6 +2103,13 @@ static int wsa884x_probe(struct sdw_slave *pdev, regcache_cache_only(wsa884x->regmap, true); wsa884x->hw_init = true;
+ hwmon = devm_hwmon_device_register_with_info(dev, "wsa884x", wsa884x, + &wsa884x_hwmon_chip_info, + NULL); + if (IS_ERR(hwmon)) + return dev_err_probe(dev, PTR_ERR(hwmon), + "Failed to register hwmon sensor\n"); + pm_runtime_set_autosuspend_delay(dev, 3000); pm_runtime_use_autosuspend(dev); pm_runtime_mark_last_busy(dev);