At Sun, 15 Mar 2015 22:28:01 +0000, Howard Mitchell wrote:
On 13/03/15 18:27, Mark Brown wrote:
On Fri, Mar 13, 2015 at 12:41:05PM +0000, Howard Mitchell wrote:
Boost Volume) provides a boost of +0.8dB. The hardware reset value of both of these gain controls is 0dB, however, in the Raspbian distribution 'Playback Volume' is being defaulted to -6dB.
- Either change the names of these controls to something that's not affected by the alsa restore mechanism,
You say "these controls" but it seems like only "Playback Volume" has a problem? My first suggestion would be to define "Analog" or "Analogue" as a prefix in ControlNames and then use that, that would avoid confusing applications while still fittig in with the naming convention.
Yes you are correct that it's only "Playback Volume" that is causing a problem. However, I included "Playback Boost Volume" as it also provides a selection of analogue gain so I think it should be treated similarly for consistency.
Did you read Documentation/sound/alsa/ControlNames.txt? It shows why "Playback Volume" is taken in that way while "Playback Boost Volume" not. Namely, the latter implies a volume control named "Playback Boost" which is applied generically -- i.e. the direction is unknown or applied to both playback and capture.
Takashi