Currently we've 2 places with BYTCR defaults: 1. The generic catch-all DMI_SYS_VENDOR=="Insyde" DMI quirk which selects SSP0-AIF1 for generic Insyde BYTCR tablets without the ACPI channel package; and 2. the defaults in the if (is_bytcr) {} code block.
Currently these are not identical, both select IN3 as the internal mic output, but the "Insyde" DMI quirk leaves out the DIFF_MIC quirk. The DIFF_MIC quirk should be enabled by default, because enabling diff. input helps a lot for devices with a differential mic, where as it is a nop on devices with a normal mic.
This commit adds the DIFF_MIC quirk to the "Insyde" DMI quirk path, by adding a new BYTCR_INPUT_DEFAULTS define and using that in both code paths which set BYTCR defaults.
Having a single place where the BYTCR input defaults are defined also allows defining jack-detect defaults in a single place in a follow-up commit.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/intel/boards/bytcr_rt5640.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index bc0b85ec0b16..0ec3aac62a07 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -82,6 +82,10 @@ enum { #define BYT_RT5640_MCLK_EN BIT(22) #define BYT_RT5640_MCLK_25MHZ BIT(23)
+#define BYTCR_INPUT_DEFAULTS \ + (BYT_RT5640_IN3_MAP | \ + BYT_RT5640_DIFF_MIC) + /* in-diff or dmic-pin + jdsrc + ovcd-th + -sf + jd-inv + terminating entry */ #define MAX_NO_PROPS 6
@@ -475,7 +479,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), }, - .driver_data = (void *)(BYT_RT5640_IN3_MAP | + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | BYT_RT5640_MCLK_EN | BYT_RT5640_SSP0_AIF1),
@@ -975,8 +979,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) }
/* change defaults for Baytrail-CR capture */ - byt_rt5640_quirk |= BYT_RT5640_IN3_MAP; - byt_rt5640_quirk |= BYT_RT5640_DIFF_MIC; + byt_rt5640_quirk |= BYTCR_INPUT_DEFAULTS; } else { byt_rt5640_quirk |= BYT_RT5640_DMIC1_MAP; }