Non-functional cleanup: 1. Drop unneeded quotes form $ref, 2. Example: Use generic node name, use define for GPIO flag, adjust indentation to consistent 4-space style.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- .../bindings/sound/cirrus,cs35l41.yaml | 40 ++++++++++--------- 1 file changed, 21 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml index 919d7f16f24c..18fb471aa891 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml @@ -45,7 +45,7 @@ properties: Configures the peak current by monitoring the current through the boost FET. Range starts at 1600 mA and goes to a maximum of 4500 mA with increments of 50 mA. See section 4.3.6 of the datasheet for details. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1600 maximum: 4500 default: 4500 @@ -54,7 +54,7 @@ properties: description: Boost inductor value, expressed in nH. Valid values include 1000, 1200, 1500 and 2200. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1000 maximum: 2200
@@ -63,7 +63,7 @@ properties: Total equivalent boost capacitance on the VBST and VAMP pins, derated at 11 volts DC. The value must be rounded to the nearest integer and expressed in uF. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32
cirrus,asp-sdout-hiz: description: @@ -73,7 +73,7 @@ properties: 1 = Hi-Z during unused slots but logic 0 while all transmit channels disabled 2 = (Default) Logic 0 during unused slots, but Hi-Z while all transmit channels disabled 3 = Hi-Z during unused slots and while all transmit channels disabled - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 default: 2 @@ -87,7 +87,7 @@ properties: enable boost voltage. 0 = Internal Boost 1 = External Boost - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1
@@ -112,7 +112,7 @@ properties: 1 = GPIO 2 = Sync 3 = MCLK input - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3
@@ -139,7 +139,7 @@ properties: 3 = MCLK input 4 = Push-pull INTB (active low) 5 = Push-pull INT (active high) - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 5
@@ -179,21 +179,23 @@ unevaluatedProperties: false
examples: - | + #include <dt-bindings/gpio/gpio.h> + spi { #address-cells = <1>; #size-cells = <0>;
- cs35l41: cs35l41@2 { - #sound-dai-cells = <1>; - compatible = "cirrus,cs35l41"; - reg = <2>; - VA-supply = <&dummy_vreg>; - VP-supply = <&dummy_vreg>; - reset-gpios = <&gpio 110 0>; - - cirrus,boost-type = <0>; - cirrus,boost-peak-milliamp = <4500>; - cirrus,boost-ind-nanohenry = <1000>; - cirrus,boost-cap-microfarad = <15>; + cs35l41: speaker-amp@2 { + #sound-dai-cells = <1>; + compatible = "cirrus,cs35l41"; + reg = <2>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + reset-gpios = <&gpio 110 GPIO_ACTIVE_HIGH>; + + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4500>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; }; };