In my initial patch, these were set too low.
Signed-off-by: Thomas Ebeling penguins@bollie.de --- sound/usb/mixer_quirks.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index bdff8674942e..aad2683ff793 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -2191,7 +2191,7 @@ static int snd_rme_controls_create(struct usb_mixer_interface *mixer) * These devices exposes a couple of DSP functions via request to EP0. * Switches are available via control registers, while routing is controlled * by controlling the volume on each possible crossing point. - * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 46341) with + * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 65536) with * 0dB being at dec. 32768. */ enum { @@ -2220,7 +2220,7 @@ enum { #define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff #define SND_BBFPRO_MIXER_VAL_SHIFT 9 #define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf -#define SND_BBFPRO_MIXER_VAL_MAX 46341 // +6dB +#define SND_BBFPRO_MIXER_VAL_MAX 65536 // +6dB
#define SND_BBFPRO_USBREQ_CTL_REG1 0x10 #define SND_BBFPRO_USBREQ_CTL_REG2 0x17