On Wed, 11 Nov 2015 09:39:09 +0100, libin.yang@linux.intel.com wrote:
From: Libin Yang libin.yang@linux.intel.com
Add a flag that user can decide to stop HDMI/DP playback when the corresponding monitor is disconnected and refuse to open PCM if there is no monitor connected.
Background: When a monitor is disconnected and a new monitor is connected, the parameters of the 2 monitors may be different. Audio driver need handle this situation.
Besides, stopping playback when monitor is disconnected will help to save the power.
Signed-off-by: Libin Yang libin.yang@linux.intel.com
Thanks. Below are just nitpicking, so let's test this patch at first, especially to see whether it has any significant influence on PA, then respin with the fixes.
David, care to check in your side, too?
sound/pci/hda/patch_hdmi.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index f503a88..4f5023a 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -47,6 +47,11 @@ static bool static_hdmi_pcm; module_param(static_hdmi_pcm, bool, 0644); MODULE_PARM_DESC(static_hdmi_pcm, "Don't restrict PCM parameters per ELD info");
+static bool hdmi_pcm_stop_on_disconnect; +module_param(hdmi_pcm_stop_on_disconnect, bool, 0644); +MODULE_PARM_DESC(hdmi_pcm_stop_on_disconnect,
"Stop PCM when monitor is disconnected");
This codec driver may be used for multiple devices, e.g. an onboard GPU and a discrete GPU. Whether a single flag is best is a slight concern. Though, as a test patch, it certainly suffices.
#define is_haswell(codec) ((codec)->core.vendor_id == 0x80862807) #define is_broadwell(codec) ((codec)->core.vendor_id == 0x80862808) #define is_skylake(codec) ((codec)->core.vendor_id == 0x80862809) @@ -72,6 +77,7 @@ struct hdmi_spec_per_cvt {
struct hdmi_spec_per_pin { hda_nid_t pin_nid;
- int pin_idx; int num_mux_nids; hda_nid_t mux_nids[HDA_MAX_CONNECTIONS]; int mux_idx;
@@ -1456,6 +1462,9 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, per_pin = get_pin(spec, pin_idx); eld = &per_pin->sink_eld;
- if (hdmi_pcm_stop_on_disconnect && !eld->eld_valid)
return -ENODEV;
An error code might influence on behavior, so let's check it carefully while testing.
err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx); if (err < 0) return err; @@ -1529,6 +1538,28 @@ static int hdmi_read_pin_conn(struct hda_codec *codec, int pin_idx) return 0; }
+static void hdmi_pcm_stop(struct hdmi_spec *spec,
struct hdmi_spec_per_pin *per_pin)+{
- struct hda_codec *codec = per_pin->codec;
- struct snd_pcm_substream *substream;
- int pin_idx = per_pin->pin_idx;
- if (!hdmi_pcm_stop_on_disconnect)
return;- substream = get_pcm_rec(spec, pin_idx)->pcm->streams[0].substream;
- snd_pcm_stream_lock_irq(substream);
- if (substream && substream->runtime &&
snd_pcm_running(substream)) {
substream NULL check has to be before the lock.
codec_info(codec,"HDMI: monitor disconnected, try to stop playback\n");
The message is good for testing, but no need to spam at each disconnect in the production state. Use codec_dbg() in the final patch.
thanks,
Takashi
snd_pcm_stop(substream, SNDRV_PCM_STATE_DISCONNECTED);- }
- snd_pcm_stream_unlock_irq(substream);
+}
static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) { struct hda_jack_tbl *jack; @@ -1586,6 +1617,8 @@ static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) } }
- if (!eld->eld_valid)
hdmi_pcm_stop(spec, per_pin);@@ -1680,6 +1713,7 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) return -ENOMEM;
per_pin->pin_nid = pin_nid;
per_pin->pin_idx = pin_idx; per_pin->non_pcm = false;
err = hdmi_read_pin_conn(codec, pin_idx);
-- 1.9.1