At Fri, 06 Nov 2009 08:19:08 +0100, I wrote:
At Thu, 05 Nov 2009 12:42:03 -0700, Troy Kisky wrote:
Takashi Iwai wrote:
At Wed, 04 Nov 2009 12:45:20 -0700, Troy Kisky wrote:
Takashi Iwai wrote:
At Tue, 3 Nov 2009 12:22:37 -0700, Troy Kisky wrote:
Poulsbo(US15W) cannot have any corb registers initialized when using single_cmd mode. When send_cmd timeout occur, note error.
Could you be more specific? What errors do you get?
And, how it goes to single_cmd mode? The single_cmd mode is very last resort, and reaching there means already a serious problem.
thanks,
Takashi
No error messages, but the response read is always 0.
This is odd. Something is already wrong, then.
For testing, I passed single_cmd=1 as a modules option.
HDAudio_03.pdf says, "If implemented, these registers must not be used at the same time as the CORB and RIRB command/response mechanisms, as the operations will conflict."
I know this, but actually this never be a problem in the real hardware. So, it's left there.
My hardware is real.
Yeah, the first hit it seems.
Plus, if the RIRB irq is enabled, the interrupt routine will print out a spurious interrupt message.
I meant "spurious response"
So your patch alone isn't enough?
That said, my hardware is switching to single_cmd eventually, even if not passed as a module option. But at least now, when that happens my audio isn't dead.
It's not dead but living-dead :) The single_cmd mode is really only for debugging. It's never for any running system.
thanks,
Takashi
I'm all in favor of totally yanking out all the single_cmd related code, but if you're leaving it in, you should apply this patch.
Well, it's no right fix in a strict manner. The right fix would be to remove the reinitialization or the first call of azx_init_cmd_io() (and disable the unsolicited events, too).
... like the patch below (untested!)
Takashi
--- diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 55c7da3..cce837a 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -722,9 +722,10 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, chip->last_cmd[addr]); chip->single_cmd = 1; bus->response_reset = 0; - /* re-initialize CORB/RIRB */ + /* release CORB/RIRB */ azx_free_cmd_io(chip); - azx_init_cmd_io(chip); + /* disable unsolicited responses */ + azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL); return -1; }
@@ -865,7 +866,9 @@ static int azx_reset(struct azx *chip) }
/* Accept unsolicited responses */ - azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL); + if (!chip->single_cmd) + azx_writel(chip, GCTL, azx_readl(chip, GCTL) | + ICH6_GCTL_UNSOL);
/* detect codecs */ if (!chip->codec_mask) { @@ -980,7 +983,8 @@ static void azx_init_chip(struct azx *chip) azx_int_enable(chip);
/* initialize the codec command I/O */ - azx_init_cmd_io(chip); + if (!chip->single_cmd) + azx_init_cmd_io(chip);
/* program the position buffer */ azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);