Liam Girdwood wrote:
On Fri, 2007-05-25 at 15:17 -0500, Timur Tabi wrote:
Liam Girdwood wrote:
These are used for setting up the dynamic audio power management and won't be needed in stand alone mode.
So if I don't care about power management, can I completely ignore anything with "dapm" in it?
Yes.
Also, do I need a codec driver at all, even if I can't control the codec? That is, can I do stuff like this:
static struct snd_soc_device mysoc_snd_devdata = { .machine = &snd_soc_machine_mysoc, .platform = &mysoc_soc_platform, };
static struct snd_soc_dai_link mpc8610hpcd_dai = { .name = "CS4270", .stream_name = "CS4270", .cpu_dai = &mysoc_i2s_dai, .init = mpc8610hpcd_machine_init, .ops = &mpc8610hpcd_ops, };
Yes, although my feeling is that a codec "driver" would still be needed to define the capabilities of your codec within the audio subsystem.
Another question:
Why do I need to specify the codec DAI in two different structures?
eti_b1_wm8731.c:
static struct snd_soc_dai_link eti_b1_dai = { .name = "WM8731", .stream_name = "WM8731", .cpu_dai = &at91_i2s_dai[1], .codec_dai = &wm8731_dai, <---- .init = eti_b1_wm8731_init, .ops = &eti_b1_ops, };
wm8731.c:
static int wm8731_init(struct snd_soc_device *socdev) { struct snd_soc_codec *codec = socdev->codec; ... int reg, ret = 0;
codec->dai = &wm8731_dai; <-----