This adds devicetree support to the wm8940 codec driver. With a DT-based kernel, there is no board-specific setting to select the driver so allow it to be manually chosen.
Signed-off-by: Lukasz Majewski lukma@denx.de --- sound/soc/codecs/Kconfig | 2 +- sound/soc/codecs/wm8940.c | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index f46a22660103..5120b15139bc 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1811,7 +1811,7 @@ config SND_SOC_WM8904 depends on I2C
config SND_SOC_WM8940 - tristate + tristate "Wolfson Microelectronics WM8940 codec" depends on I2C
config SND_SOC_WM8955 diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 440d048ef0c0..8615a55f84dd 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -779,9 +779,16 @@ static const struct i2c_device_id wm8940_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm8940_i2c_id);
+static const struct of_device_id wm8940_of_match[] = { + { .compatible = "wlf,wm8940", }, + { } +}; +MODULE_DEVICE_TABLE(of, wm8940_of_match); + static struct i2c_driver wm8940_i2c_driver = { .driver = { .name = "wm8940", + .of_match_table = wm8940_of_match, }, .probe = wm8940_i2c_probe, .id_table = wm8940_i2c_id,