I found this in Linux Audio Users:
http://linuxaudio.org/mailarchive/lau/2013/5/20/200177
which would indicate that the issue has been current since May, and possibly impacts upon many different sound cards.
Does this still persist with kernel 3.10? My symptoms certainly agree exactly with this. Using alas-tools 1.0.27 with kernel 3.10-3.
Nick/.
On Saturday 28 September 2013 15:30:04 Dr Nicholas J Bailey wrote:
I'm on debian jessie,
Linux arial 3.10-3-686-pae #1 SMP Debian 3.10.11-1 (2013-09-10) i686 GNU/Linux
with a Tascam us-122 that has recently stopped working.
When I try to capture with anything, there is a few hundred ms of audio then the capture process stalls and the following dmesg appears:
[ 462.596296] Sequence Error!(hcd_frame=0 ep=8in;wait=1024,frame=0). [ 462.596296] Most probably some urb of usb-frame 1024 is still missing. [ 462.596296] Cause could be too long delays in usb-hcd interrupt handling. [ 477.959230] Sequence Error!(hcd_frame=0 ep=8in;wait=1024,frame=0). [ 477.959230] Most probably some urb of usb-frame 1024 is still missing. [ 477.959230] Cause could be too long delays in usb-hcd interrupt handling.
Before this kernel, the box worked OK. The only think that leads me to believe it might be my fault is that for a very long time, I've had to plug the box in:
[ 445.529271] usb 2-1.6: new full-speed USB device number 5 using ehci-pci [ 445.622076] usb 2-1.6: New USB device found, idVendor=1604, idProduct=8006 [ 445.622086] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
then unplug it and plug it in again:
[ 445.972743] usb 2-1.6: USB disconnect, device number 5 [ 447.621519] usb 2-1.6: new full-speed USB device number 6 using ehci-pci [ 447.714462] usb 2-1.6: New USB device found, idVendor=1604, idProduct=8007 [ 447.714471] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 447.834852] usbcore: registered new interface driver snd-usb-usx2y [ 455.194314] usb 2-1.6: USB disconnect, device number 6 [ 457.487433] usb 2-1.6: new full-speed USB device number 7 using ehci-pci [ 457.579960] usb 2-1.6: New USB device found, idVendor=1604, idProduct=8006 [ 457.579969] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
to get the firmware to load
[ 457.888884] usb 2-1.6: USB disconnect, device number 7 [ 459.379782] usb 2-1.6: new full-speed USB device number 8 using ehci-pci [ 459.472516] usb 2-1.6: New USB device found, idVendor=1604, idProduct=8007 [ 459.472526] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
(green USB light comes on here).