The patch
ASoC: bytcr_rt5640: log quirk configuration errors
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From cb67d7651676e8c8f2e40587ef591da057806c57 Mon Sep 17 00:00:00 2001
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Date: Mon, 24 Apr 2017 16:34:33 -0500 Subject: [PATCH] ASoC: bytcr_rt5640: log quirk configuration errors
Now that quirks can be overridden with a module parameter, log errors so that non-sensical quirks introduced by mistake are identified.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 100 +++++++++++++++++++++++++--------- 1 file changed, 75 insertions(+), 25 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 5ca09cadf39f..f063368edef9 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -57,6 +57,7 @@ enum { struct byt_rt5640_private { struct clk *mclk; }; +static bool is_bytcr;
static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN; static unsigned int quirk_override; @@ -65,30 +66,79 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override");
static void log_quirks(struct device *dev) { - if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_DMIC1_MAP) - dev_info(dev, "quirk DMIC1_MAP enabled"); - if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_DMIC2_MAP) - dev_info(dev, "quirk DMIC2_MAP enabled"); - if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_IN1_MAP) - dev_info(dev, "quirk IN1_MAP enabled"); - if (BYT_RT5640_MAP(byt_rt5640_quirk) == BYT_RT5640_IN3_MAP) - dev_info(dev, "quirk IN3_MAP enabled"); - if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) - dev_info(dev, "quirk DMIC enabled"); + int map; + bool has_dmic = false; + bool has_mclk = false; + bool has_ssp0 = false; + bool has_ssp0_aif1 = false; + bool has_ssp0_aif2 = false; + bool has_ssp2_aif2 = false; + + map = BYT_RT5640_MAP(byt_rt5640_quirk); + switch (map) { + case BYT_RT5640_DMIC1_MAP: + dev_info(dev, "quirk DMIC1_MAP enabled\n"); + has_dmic = true; + break; + case BYT_RT5640_DMIC2_MAP: + dev_info(dev, "quirk DMIC2_MAP enabled\n"); + has_dmic = true; + break; + case BYT_RT5640_IN1_MAP: + dev_info(dev, "quirk IN1_MAP enabled\n"); + break; + case BYT_RT5640_IN3_MAP: + dev_info(dev, "quirk IN3_MAP enabled\n"); + break; + default: + dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map); + break; + } + if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) { + if (has_dmic) + dev_info(dev, "quirk DMIC enabled\n"); + else + dev_err(dev, "quirk DMIC enabled but no DMIC input set, will be ignored\n"); + } if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) - dev_info(dev, "quirk MONO_SPEAKER enabled"); - if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) - dev_info(dev, "quirk DIFF_MIC enabled"); - if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) - dev_info(dev, "quirk SSP2_AIF2 enabled"); - if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) - dev_info(dev, "quirk SSP0_AIF1 enabled"); - if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) - dev_info(dev, "quirk SSP0_AIF2 enabled"); - if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) - dev_info(dev, "quirk MCLK_EN enabled"); - if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) - dev_info(dev, "quirk MCLK_25MHZ enabled"); + dev_info(dev, "quirk MONO_SPEAKER enabled\n"); + if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) { + if (!has_dmic) + dev_info(dev, "quirk DIFF_MIC enabled\n"); + else + dev_info(dev, "quirk DIFF_MIC enabled but DMIC input selected, will be ignored\n"); + } + if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) { + dev_info(dev, "quirk SSP0_AIF1 enabled\n"); + has_ssp0 = true; + has_ssp0_aif1 = true; + } + if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) { + dev_info(dev, "quirk SSP0_AIF2 enabled\n"); + has_ssp0 = true; + has_ssp0_aif2 = true; + } + if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) { + dev_info(dev, "quirk SSP2_AIF2 enabled\n"); + has_ssp2_aif2 = true; + } + if (is_bytcr && !has_ssp0) + dev_err(dev, "Invalid routing, bytcr detected but no SSP0-based quirk, audio cannot work with SSP2 on bytcr\n"); + if (has_ssp0_aif1 && has_ssp0_aif2) + dev_err(dev, "Invalid routing, SSP0 cannot be connected to both AIF1 and AIF2\n"); + if (has_ssp0 && has_ssp2_aif2) + dev_err(dev, "Invalid routing, cannot have both SSP0 and SSP2 connected to codec\n"); + + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { + dev_info(dev, "quirk MCLK_EN enabled\n"); + has_mclk = true; + } + if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) { + if (has_mclk) + dev_info(dev, "quirk MCLK_25MHZ enabled\n"); + else + dev_err(dev, "quirk MCLK_25MHZ enabled but quirk MCLK not selected, will be ignored\n"); + } }
@@ -132,7 +182,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, ret = clk_prepare_enable(priv->mclk); if (ret < 0) { dev_err(card->dev, - "could not configure MCLK state"); + "could not configure MCLK state\n"); return ret; } } @@ -714,8 +764,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) int i; int dai_index; struct byt_rt5640_private *priv; - bool is_bytcr = false;
+ is_bytcr = false; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); if (!priv) return -ENOMEM;