From: Jeeja KP jeeja.kp@intel.com
This patch series includes driver updates for the handling scenarios during System S0/S3 transitions when audio stream is stopped during system. o move DMA configuration in DSP Gateway Module widget event handler to ensure DMA is configured after resume. o Enable SSP MLCK using Supply widget. This will ensure the MCLK is enabled when the widget is power on. o Check DMA decouple register state before coupling/decoupling the DMA. o In case of HDMI pass-through pipe, reset only the FE Pipe when stream in in XRUN state. o Resume the stream from HW renderer position. o HDMI Codec pin and converter state need to be restored when stream is resumed.
Jeeja KP (12): ASoC: Intel: Skylake: Add helper function to setup host/link dma ASoC: Intel: Skylake: Configure DMA in PRE_PMD handler of Mixer ASoC: Intel: Skylake: Removed unused skl_get_format() ALSA: hda: check stream decoupled register state ASoC: Intel: Skylake: Add set_tristate DAI ops to enable SSP MCLK ASoC: Intel: Skylake: Remove unused SSP BE prepare DAI ops ASoC: Intel: Skylake: Add supply widget as non DSP widget ASoC: Intel: Skylake: Add supply widget in skl_nau_max machine ASoC: Intel: Skylake: Add supply widget in bxt_da_max machine ASoC: Intel: Skylake: Don't reset pass-through pipe in BE prepare ASoC: Intel: Skylake: set the resume point to LPIB ASoC: hdac_hdmi: Enable pin and converter in prepare
sound/hda/ext/hdac_ext_stream.c | 15 +- sound/soc/codecs/hdac_hdmi.c | 28 ++-- sound/soc/intel/boards/bxt_da7219_max98357a.c | 34 ++++ sound/soc/intel/boards/skl_nau88l25_max98357a.c | 34 ++++ sound/soc/intel/skylake/skl-pcm.c | 210 +++++++++++++----------- sound/soc/intel/skylake/skl-topology.c | 27 ++- sound/soc/intel/skylake/skl-topology.h | 6 + 7 files changed, 240 insertions(+), 114 deletions(-)