On Fri, Aug 14, 2020 at 04:23:08PM +0530, Rohit kumar wrote:
Update lpass-cpu binding with yaml formats.
Signed-off-by: Rohit kumar rohitkr@codeaurora.org
.../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 -------------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 189 +++++++++++++++++++++ 2 files changed, 189 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt deleted file mode 100644 index c07202c..00000000 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt +++ /dev/null @@ -1,130 +0,0 @@ -* Qualcomm Technologies LPASS CPU DAI
-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
-Required properties:
-- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
"qcom,sc7180-lpass-cpu"
-- clocks : Must contain an entry for each entry in clock-names. -- clock-names : A list which must include the following entries:
* "ahbix-clk"
* "mi2s-osr-clk"
* "mi2s-bit-clk"
: required clocks for "qcom,lpass-cpu-apq8016"
* "ahbix-clk"
* "mi2s-bit-clk0"
* "mi2s-bit-clk1"
* "mi2s-bit-clk2"
* "mi2s-bit-clk3"
* "pcnoc-mport-clk"
* "pcnoc-sway-clk"
: required clocks for "qcom,lpass-cpu-sc7180"
* "audio-core"
* "mclk0"
* "mi2s-bit-clk0"
* "mi2s-bit-clk1"
* "pcnoc-sway-clk"
* "pcnoc-mport-clk"
-- interrupts : Must contain an entry for each entry in
interrupt-names.
-- interrupt-names : A list which must include the following entries:
* "lpass-irq-lpaif"
-- pinctrl-N : One property must exist for each entry in
pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
for details of the property values.
-- pinctrl-names : Must contain a "default" entry. -- reg : Must contain an address for each entry in reg-names. -- reg-names : A list which must include the following entries:
* "lpass-lpaif"
-- #address-cells : Must be 1 -- #size-cells : Must be 0
-Optional properties:
-- qcom,adsp : Phandle for the audio DSP node
-By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. -The SD lines to use can be configured by adding subnodes for each of the DAIs.
-Required properties for each DAI (represented by a subnode): -- reg : Must be one of the DAI IDs
(usually part of dt-bindings header)
-- qcom,playback-sd-lines: List of serial data lines to use for playback
Each SD line should be represented by a number from 0-3.
-- qcom,capture-sd-lines : List of serial data lines to use for capture
Each SD line should be represented by a number from 0-3.
-Note that adding a subnode changes the default to "no lines configured", -so both playback and capture lines should be configured when a subnode is added.
-Examples: -1)
-lpass@28100000 {
- compatible = "qcom,lpass-cpu";
- clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
- clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
- interrupts = <0 85 1>;
- interrupt-names = "lpass-irq-lpaif";
- pinctrl-names = "default", "idle";
- pinctrl-0 = <&mi2s_default>;
- pinctrl-1 = <&mi2s_idle>;
- reg = <0x28100000 0x10000>;
- reg-names = "lpass-lpaif";
- qcom,adsp = <&adsp>;
- #address-cells = <1>;
- #size-cells = <0>;
- /* Optional to set different MI2S SD lines */
- dai@3 {
reg = <MI2S_QUATERNARY>;
qcom,playback-sd-lines = <0 1>;
- };
-};
-2)
-#include <dt-bindings/sound/sc7180-lpass.h>
-lpass_cpu: lpass {
- compatible = "qcom,sc7180-lpass-cpu";
- reg = <0 0x62F00000 0 0x29000>;
- iommus = <&apps_smmu 0x1020 0>;
- power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
- clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
<&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
<&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
<&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
- clock-names = "pcnoc-sway-clk", "audio-core",
"mclk0", "pcnoc-mport-clk",
"mi2s-bit-clk0", "mi2s-bit-clk1";
- interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "lpass-irq-lpaif";
- #sound-dai-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- mi2s-primary@0 {
reg = <MI2S_PRIMARY>;
qcom,playback-sd-lines = <1>;
qcom,capture-sd-lines = <0>;
- };
- mi2s-secondary@1 {
reg = <MI2S_SECONDARY>;
qcom,playback-sd-lines = <0>;
- };
-}; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file mode 100644 index 00000000..09c9bd2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -0,0 +1,189 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings
+maintainers:
- Srinivas Kandagatla srinivas.kandagatla@linaro.org
- Rohit kumar rohitkr@codeaurora.org
+description: |
- Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
- of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
- is a module to configure Low-Power Audio Interface(LPAIF) core registers
- across different IP versions.
+properties:
- compatible:
- enum:
- qcom,lpass-cpu
- qcom,apq8016-lpass-cpu
- qcom,sc7180-lpass-cpu
- reg:
- maxItems: 1
- description: LPAIF core registers
- clocks:
- minItems: 3
- maxItems: 6
- clock-names:
- minItems: 3
- maxItems: 6
- interrupts:
- maxItems: 1
- description: LPAIF DMA buffer interrupt
- qcom,adsp:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: Phandle for the audio DSP node
- iommus:
- maxItems: 1
- description: Phandle to apps_smmu node with sid mask
- power-domains:
- maxItems: 1
- '#sound-dai-cells':
- const: 1
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
+patternProperties:
- "(^mi2s-[0-9a-f]$|mi2s)":
This allows '.*mi2s.*' for a node name which is too lax. And since there's a required 'reg' property, the unit-address should always be there.
Looking at this again, the node names shouldn't imply instance information. Just a generic '^dai@[0-9a-f]$' should suffice.
- type: object
- description: Required properties for each DAI
'description' should be what the node is, not what the schema has. Plus it is wrong as there's optional properties here too.
- properties:
reg:
maxItems: 1
description: Must be one of the DAI ID
qcom,playback-sd-lines:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: list of MI2S data lines for playback
qcom,capture-sd-lines:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: list of MI2S data lines for capture
- required:
- reg
- additionalProperties: false
+required:
- compatible
- reg
- clocks
- clock-names
- interrupts
- '#sound-dai-cells'
+additionalProperties: false
+allOf:
- if:
properties:
compatible:
contains:
const: qcom,lpass-cpu
- then:
properties:
clock-names:
items:
- const: ahbix-clk
- const: mi2s-osr-clk
- const: mi2s-bit-clk
- if:
properties:
compatible:
contains:
const: qcom,apq8016-lpass-cpu
- then:
properties:
clock-names:
items:
- const: ahbix-clk
- const: mi2s-bit-clk0
- const: mi2s-bit-clk1
- const: mi2s-bit-clk2
- const: mi2s-bit-clk3
- const: pcnoc-mport-clk
- const: pcnoc-sway-clk
- if:
properties:
compatible:
contains:
const: qcom,sc7180-lpass-cpu
- then:
properties:
clock-names:
items:
- const: pcnoc-sway-clk
- const: audio-core
- const: mclk0
- const: pcnoc-mport-clk
- const: mi2s-bit-clk0
- const: mi2s-bit-clk1
required:
- iommus
- power-domains
+examples:
- |
- #include <dt-bindings/sound/sc7180-lpass.h>
- soc {
#address-cells = <2>;
#size-cells = <2>;
lpass@62f00000 {
compatible = "qcom,sc7180-lpass-cpu";
reg = <0 0x62f00000 0 0x29000>;
iommus = <&apps_smmu 0x1020 0>;
power-domains = <&lpass_hm 0>;
clocks = <&gcc 131>,
<&lpasscorecc 6>,
<&lpasscorecc 7>,
<&lpasscorecc 10>,
<&lpasscorecc 8>,
<&lpasscorecc 9>;
clock-names = "pcnoc-sway-clk", "audio-core",
"mclk0", "pcnoc-mport-clk",
"mi2s-bit-clk0", "mi2s-bit-clk1";
interrupts = <0 160 1>;
#sound-dai-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
/* Optional to set different MI2S SD lines */
mi2s-primary@0 {
reg = <MI2S_PRIMARY>;
qcom,playback-sd-lines = <1>;
qcom,capture-sd-lines = <0>;
};
};
- };
+...
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.