The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here.
Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support")
Signed-off-by: Andrew F. Davis afd@ti.com --- arch/arm/boot/dts/omap3-n900.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 669c51c00c00..5362139d5312 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -558,7 +558,7 @@ tlv320aic3x: tlv320aic3x@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ ai3x-gpio-func = < 0 /* AIC3X_GPIO1_FUNC_DISABLED */ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ @@ -575,7 +575,7 @@ tlv320aic3x_aux: tlv320aic3x@19 { compatible = "ti,tlv320aic3x"; reg = <0x19>; - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
AVDD-supply = <&vmmc2>; DRVDD-supply = <&vmmc2>;