On 12/30/2013 08:42 PM, Jean-Francois Moine wrote:
On 12/20/2013 08:13 PM, Jean-Francois Moine wrote:
On Fri, 20 Dec 2013 18:18:49 +0100 Lars-Peter Clausen lars@metafoo.de wrote:
On 12/20/2013 07:05 PM, Jean-Francois Moine wrote:
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c index 4af1936..aac22fc 100644 --- a/sound/soc/kirkwood/kirkwood-dma.c +++ b/sound/soc/kirkwood/kirkwood-dma.c
[snip]
@@ -43,12 +33,6 @@ static struct snd_pcm_hardware kirkwood_dma_snd_hw = { SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_PAUSE),
- .formats = KIRKWOOD_FORMATS,
- .rates = KIRKWOOD_RATES,
- .rate_min = 8000,
- .rate_max = 384000,
- .channels_min = 1,
- .channels_max = 8, .buffer_bytes_max = KIRKWOOD_SND_MAX_BUFFER_BYTES, .period_bytes_min = KIRKWOOD_SND_MIN_PERIOD_BYTES, .period_bytes_max = KIRKWOOD_SND_MAX_PERIOD_BYTES,
Lars,
You removed too many things. The 'formats' field is mandatory.
No it is not. While snd_soc_set_runtime_hwparams() uses it it is later overwritten again in soc_pcm_init_runtime_hw().
I have a DPCM system and soc_pcm_init_runtime_hw() is not called (either 'dynamic' or 'no_pcm' is set in the DAI links).
Ok, I see dpcm_set_fe_runtime() does things slightly different.
Well, I advanced a bit with DPCM, and I have a problem with this field.
In the driver, the front-end DAI is the audio controller and the back-ends DAIs are the HDMI and SPDIF outputs. These back-end DAIs have different rates and formats, as have the audio controller outputs (I2S and SPDIF). So, I used intermediate DAIs which represent the audio controller outputs, and they are described in the DAI links:
link 0 (FE): audio controller <-> dummy DAI link 1 (BE): i2s audio controller output <-> HDMI output link 2 (BE): spdif audio controller output <-> HDMI output link 3 (BE): spdif audio controller output <-> SPDIF output
Without any patch in the core, the rates and formats are always the rates and formats of the audio controller (FE). This is due to the 'goto dynamic' in soc_pcm_open(): as the back-ends are linked to real DAIs, the rate and format constraints must be checked. So, as a temporary patch, I replaced:
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) goto dynamic; by: if (rtd->dai_link->dynamic) goto dynamic;
(indeed, this will not work if the back-end is linked to the dummy DAI)
and, I get the correct rates and formats in the runtime hardware parameters. But these values are lost:
on DMA open (FE pcm open), when the driver calls snd_soc_set_runtime_hwparams() (loss of the formats), and
on dpcm_set_fe_runtime() call (loss of the rates).
The first problem can be fixed in the audio controller by a hack, saving /restoring the formats on calling snd_soc_set_runtime_hwparams(), and the second problem is easily fixed moving dpcm_set_fe_runtime() at the beginning of dpcm_fe_dai_startup(). Are these good solutions?
This seems all to be very hackish. We clearly need to fix that DPCM only considers the constraints of the FE DAI though.
The digital domain of a sound card can be thought of as a pipeline which mostly operates on one sample at a time. The samples have two main parameters, the frequency with which they are generated and their width. Certain components in the pipeline have constraints on which parameters they can work with. There are also components which can change the parameters, e.g. a samplerate converter can change the frequency or a DAI might be able to change the width. What we are interested in is for which parameters on the PCM side are we able to build up a pipeline that satisfies all constraints of all the components in the pipeline. I think this can be done by walking the DAPM graph and collect the constraints associated with the components in the path (The graph walking only has to be done when components are added or removed). E.g. build up a list of all the the DAIs that are reachable from a PCM and then use the constraints of those DAIs for the PCM.
For starters we probably do not want support components which can change the parameters for the sample stream. This is currently not supported in ASoC at all and adding it will makes things more complex. But it should be kept in mind, so it can be added in the next iteration. When calculating the constraints we should probably also consider all possible paths and not only active paths, since otherwise you'll run into problems if you want to change the active path at runtime and the new configuration has more restrictive constraints.
While we are at it we should probably also reduce the separation between DPCM and clasic PCM as clasic PCM is just a special case (static routes) of DPCM.
- Lars