Get it done as early as possible, it's neater and minimises the time the pins aren't configured as requested.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm8904.c | 110 ++++++++++++++++++++++----------------------- 1 file changed, 55 insertions(+), 55 deletions(-)
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index b178232..cc5fb43 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -2055,7 +2055,7 @@ static int wm8904_probe(struct snd_soc_codec *codec) { struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec); struct wm8904_pdata *pdata = wm8904->pdata; - int ret, i; + int ret;
codec->control_data = wm8904->regmap;
@@ -2077,60 +2077,6 @@ static int wm8904_probe(struct snd_soc_codec *codec) return ret; }
- /* Change some default settings - latch VU and enable ZC */ - snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT, - WM8904_ADC_VU, WM8904_ADC_VU); - snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_RIGHT, - WM8904_ADC_VU, WM8904_ADC_VU); - snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_VOLUME_LEFT, - WM8904_DAC_VU, WM8904_DAC_VU); - snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_VOLUME_RIGHT, - WM8904_DAC_VU, WM8904_DAC_VU); - snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT1_LEFT, - WM8904_HPOUT_VU | WM8904_HPOUTLZC, - WM8904_HPOUT_VU | WM8904_HPOUTLZC); - snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT1_RIGHT, - WM8904_HPOUT_VU | WM8904_HPOUTRZC, - WM8904_HPOUT_VU | WM8904_HPOUTRZC); - snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT2_LEFT, - WM8904_LINEOUT_VU | WM8904_LINEOUTLZC, - WM8904_LINEOUT_VU | WM8904_LINEOUTLZC); - snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT2_RIGHT, - WM8904_LINEOUT_VU | WM8904_LINEOUTRZC, - WM8904_LINEOUT_VU | WM8904_LINEOUTRZC); - snd_soc_update_bits(codec, WM8904_CLOCK_RATES_0, - WM8904_SR_MODE, 0); - - /* Apply configuration from the platform data. */ - if (wm8904->pdata) { - for (i = 0; i < WM8904_GPIO_REGS; i++) { - if (!pdata->gpio_cfg[i]) - continue; - - regmap_update_bits(wm8904->regmap, - WM8904_GPIO_CONTROL_1 + i, - 0xffff, - pdata->gpio_cfg[i]); - } - - /* Zero is the default value for these anyway */ - for (i = 0; i < WM8904_MIC_REGS; i++) - regmap_update_bits(wm8904->regmap, - WM8904_MIC_BIAS_CONTROL_0 + i, - 0xffff, - pdata->mic_cfg[i]); - } - - /* Set Class W by default - this will be managed by the Class - * G widget at runtime where bypass paths are available. - */ - snd_soc_update_bits(codec, WM8904_CLASS_W_0, - WM8904_CP_DYN_PWR, WM8904_CP_DYN_PWR); - - /* Use normal bias source */ - snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0, - WM8904_POBCTRL, 0); - wm8904_handle_pdata(codec);
wm8904_add_widgets(codec); @@ -2234,6 +2180,60 @@ static __devinit int wm8904_i2c_probe(struct i2c_client *i2c, goto err_enable; }
+ /* Change some default settings - latch VU and enable ZC */ + regmap_update_bits(wm8904->regmap, WM8904_ADC_DIGITAL_VOLUME_LEFT, + WM8904_ADC_VU, WM8904_ADC_VU); + regmap_update_bits(wm8904->regmap, WM8904_ADC_DIGITAL_VOLUME_RIGHT, + WM8904_ADC_VU, WM8904_ADC_VU); + regmap_update_bits(wm8904->regmap, WM8904_DAC_DIGITAL_VOLUME_LEFT, + WM8904_DAC_VU, WM8904_DAC_VU); + regmap_update_bits(wm8904->regmap, WM8904_DAC_DIGITAL_VOLUME_RIGHT, + WM8904_DAC_VU, WM8904_DAC_VU); + regmap_update_bits(wm8904->regmap, WM8904_ANALOGUE_OUT1_LEFT, + WM8904_HPOUT_VU | WM8904_HPOUTLZC, + WM8904_HPOUT_VU | WM8904_HPOUTLZC); + regmap_update_bits(wm8904->regmap, WM8904_ANALOGUE_OUT1_RIGHT, + WM8904_HPOUT_VU | WM8904_HPOUTRZC, + WM8904_HPOUT_VU | WM8904_HPOUTRZC); + regmap_update_bits(wm8904->regmap, WM8904_ANALOGUE_OUT2_LEFT, + WM8904_LINEOUT_VU | WM8904_LINEOUTLZC, + WM8904_LINEOUT_VU | WM8904_LINEOUTLZC); + regmap_update_bits(wm8904->regmap, WM8904_ANALOGUE_OUT2_RIGHT, + WM8904_LINEOUT_VU | WM8904_LINEOUTRZC, + WM8904_LINEOUT_VU | WM8904_LINEOUTRZC); + regmap_update_bits(wm8904->regmap, WM8904_CLOCK_RATES_0, + WM8904_SR_MODE, 0); + + /* Apply configuration from the platform data. */ + if (wm8904->pdata) { + for (i = 0; i < WM8904_GPIO_REGS; i++) { + if (!wm8904->pdata->gpio_cfg[i]) + continue; + + regmap_update_bits(wm8904->regmap, + WM8904_GPIO_CONTROL_1 + i, + 0xffff, + wm8904->pdata->gpio_cfg[i]); + } + + /* Zero is the default value for these anyway */ + for (i = 0; i < WM8904_MIC_REGS; i++) + regmap_update_bits(wm8904->regmap, + WM8904_MIC_BIAS_CONTROL_0 + i, + 0xffff, + wm8904->pdata->mic_cfg[i]); + } + + /* Set Class W by default - this will be managed by the Class + * G widget at runtime where bypass paths are available. + */ + regmap_update_bits(wm8904->regmap, WM8904_CLASS_W_0, + WM8904_CP_DYN_PWR, WM8904_CP_DYN_PWR); + + /* Use normal bias source */ + regmap_update_bits(wm8904->regmap, WM8904_BIAS_CONTROL_0, + WM8904_POBCTRL, 0); + /* Can leave the device powered off until we need it */ regcache_cache_only(wm8904->regmap, true); regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);