- Clarify the data flows. For SB Live! I fixed only the most obvious point ("from" vs. "for"). - Mention 7.1 side channels on Audigy. - Be unspecific about the output DACs on Audigy, as lots of variants actually exist (see emu_chip_details table).
Signed-off-by: Oswald Buddenhagen oswald.buddenhagen@gmx.de --- Documentation/sound/cards/audigy-mixer.rst | 130 ++++++++++---------- Documentation/sound/cards/sb-live-mixer.rst | 24 ++-- 2 files changed, 77 insertions(+), 77 deletions(-)
diff --git a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst index 51cc7ac034ce..7ebaacb6df3d 100644 --- a/Documentation/sound/cards/audigy-mixer.rst +++ b/Documentation/sound/cards/audigy-mixer.rst @@ -46,157 +46,158 @@ FX-bus
name='PCM Front Playback Volume',index=0 ---------------------------------------- -This control is used to attenuate samples for left and right front PCM FX-bus +This control is used to attenuate samples from left and right front PCM FX-bus accumulators. ALSA uses accumulators 8 and 9 for left and right front PCM -samples for 5.1 playback. The result samples are forwarded to the front DAC PCM -slots of the Philips DAC. +samples for 5.1 playback. The result samples are forwarded to the front speakers.
name='PCM Surround Playback Volume',index=0 ------------------------------------------- -This control is used to attenuate samples for left and right surround PCM FX-bus +This control is used to attenuate samples from left and right surround PCM FX-bus accumulators. ALSA uses accumulators 2 and 3 for left and right surround PCM -samples for 5.1 playback. The result samples are forwarded to the surround DAC PCM -slots of the Philips DAC. +samples for 5.1 playback. The result samples are forwarded to the surround (rear) +speakers. + +name='PCM Side Playback Volume',index=0 +--------------------------------------- +This control is used to attenuate samples from left and right side PCM FX-bus +accumulators. ALSA uses accumulators 14 and 15 for left and right side PCM +samples for 7.1 playback. The result samples are forwarded to the side speakers.
name='PCM Center Playback Volume',index=0 ----------------------------------------- -This control is used to attenuate samples for center PCM FX-bus accumulator. -ALSA uses accumulator 6 for center PCM sample for 5.1 playback. The result sample -is forwarded to the center DAC PCM slot of the Philips DAC. +This control is used to attenuate samples from center PCM FX-bus accumulator. +ALSA uses accumulator 6 for center PCM samples for 5.1 playback. The result +samples are forwarded to the center speaker.
name='PCM LFE Playback Volume',index=0 -------------------------------------- This control is used to attenuate sample for LFE PCM FX-bus accumulator. -ALSA uses accumulator 7 for LFE PCM sample for 5.1 playback. The result sample -is forwarded to the LFE DAC PCM slot of the Philips DAC. +ALSA uses accumulator 7 for LFE PCM samples for 5.1 playback. The result +samples are forwarded to the subwoofer.
name='PCM Playback Volume',index=0 ---------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for -stereo playback. The result samples are forwarded to the front DAC PCM slots -of the Philips DAC. +stereo playback. The result samples are forwarded to the front speakers.
name='PCM Capture Volume',index=0 --------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus -accumulator. ALSA uses accumulators 0 and 1 for left and right PCM. -The result is forwarded to the ADC capture FIFO (thus to the standard capture -PCM device). +This control is used to attenuate samples from left and right PCM FX-bus +accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for +stereo playback. The result is forwarded to the standard capture PCM device.
name='Music Playback Volume',index=0 ------------------------------------ -This control is used to attenuate samples for left and right MIDI FX-bus +This control is used to attenuate samples from left and right MIDI FX-bus accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples. -The result samples are forwarded to the front DAC PCM slots of the AC97 codec. +The result samples are forwarded to the virtual stereo mixer.
name='Music Capture Volume',index=0 ----------------------------------- -These controls are used to attenuate samples for left and right MIDI FX-bus -accumulator. ALSA uses accumulators 4 and 5 for left and right PCM. -The result is forwarded to the ADC capture FIFO (thus to the standard capture -PCM device). +These controls are used to attenuate samples from left and right MIDI FX-bus +accumulator. ALSA uses accumulators 4 and 5 for left and right MIDI samples. +The result is forwarded to the standard capture PCM device.
name='Mic Playback Volume',index=0 ---------------------------------- -This control is used to attenuate samples for left and right Mic input. -For Mic input is used AC97 codec. The result samples are forwarded to -the front DAC PCM slots of the Philips DAC. Samples are forwarded to Mic -capture FIFO (device 1 - 16bit/8KHz mono) too without volume control. +This control is used to attenuate samples from left and right Mic input of +the AC97 codec. The result samples are forwarded to the virtual stereo mixer.
name='Mic Capture Volume',index=0 --------------------------------- -This control is used to attenuate samples for left and right Mic input. -The result is forwarded to the ADC capture FIFO (thus to the standard capture -PCM device). +This control is used to attenuate samples from left and right Mic input of +the AC97 codec. The result is forwarded to the standard capture PCM device. + +The original samples are also forwarded to the Mic capture PCM device (device 1; +16bit/8KHz mono) without volume control.
name='Audigy CD Playback Volume',index=0 ---------------------------------------- This control is used to attenuate samples from left and right IEC958 TTL digital inputs (usually used by a CDROM drive). The result samples are -forwarded to the front DAC PCM slots of the Philips DAC. +forwarded to the virtual stereo mixer.
name='Audigy CD Capture Volume',index=0 --------------------------------------- This control is used to attenuate samples from left and right IEC958 TTL -digital inputs (usually used by a CDROM drive). The result samples are -forwarded to the ADC capture FIFO (thus to the standard capture PCM device). +digital inputs (usually used by a CDROM drive). The result is forwarded +to the standard capture PCM device.
name='IEC958 Optical Playback Volume',index=0 --------------------------------------------- This control is used to attenuate samples from left and right IEC958 optical -digital input. The result samples are forwarded to the front DAC PCM slots -of the Philips DAC. +digital input. The result samples are forwarded to the virtual stereo mixer.
name='IEC958 Optical Capture Volume',index=0 -------------------------------------------- This control is used to attenuate samples from left and right IEC958 optical -digital inputs. The result samples are forwarded to the ADC capture FIFO -(thus to the standard capture PCM device). +digital inputs. The result is forwarded to the standard capture PCM device.
name='Line2 Playback Volume',index=0 ------------------------------------ This control is used to attenuate samples from left and right I2S ADC -inputs (on the AudigyDrive). The result samples are forwarded to the front -DAC PCM slots of the Philips DAC. +inputs (on the AudigyDrive). The result samples are forwarded to the virtual +stereo mixer.
name='Line2 Capture Volume',index=1 ----------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs (on the AudigyDrive). The result samples are forwarded to the ADC -capture FIFO (thus to the standard capture PCM device). +inputs (on the AudigyDrive). The result is forwarded to the standard capture +PCM device.
name='Analog Mix Playback Volume',index=0 ----------------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs from Philips ADC. The result samples are forwarded to the front -DAC PCM slots of the Philips DAC. This contains mix from analog sources -like CD, Line In, Aux, .... +inputs from Philips ADC. The result samples are forwarded to the virtual +stereo mixer. This contains mix from analog sources like CD, Line In, Aux, ....
name='Analog Mix Capture Volume',index=1 ---------------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs Philips ADC. The result samples are forwarded to the ADC -capture FIFO (thus to the standard capture PCM device). +inputs Philips ADC. The result is forwarded to the standard capture PCM device.
name='Aux2 Playback Volume',index=0 ----------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs (on the AudigyDrive). The result samples are forwarded to the front -DAC PCM slots of the Philips DAC. +inputs (on the AudigyDrive). The result samples are forwarded to the virtual +stereo mixer.
name='Aux2 Capture Volume',index=1 ---------------------------------- This control is used to attenuate samples from left and right I2S ADC -inputs (on the AudigyDrive). The result samples are forwarded to the ADC -capture FIFO (thus to the standard capture PCM device). +inputs (on the AudigyDrive). The result is forwarded to the standard capture +PCM device.
name='Front Playback Volume',index=0 ------------------------------------ -All stereo signals are mixed together and mirrored to surround, center and LFE. -This control is used to attenuate samples for left and right front speakers of -this mix. +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the front speakers.
name='Surround Playback Volume',index=0 --------------------------------------- -All stereo signals are mixed together and mirrored to surround, center and LFE. -This control is used to attenuate samples for left and right surround speakers of -this mix. +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the surround (rear) speakers. + +name='Side Playback Volume',index=0 +----------------------------------- +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the side speakers.
name='Center Playback Volume',index=0 ------------------------------------- -All stereo signals are mixed together and mirrored to surround, center and LFE. -This control is used to attenuate sample for center speaker of this mix. +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the center speaker.
name='LFE Playback Volume',index=0 ---------------------------------- -All stereo signals are mixed together and mirrored to surround, center and LFE. -This control is used to attenuate sample for LFE speaker of this mix. +This control is used to attenuate samples from the virtual stereo mixer. +The result samples are forwarded to the subwoofer.
name='Tone Control - Switch',index=0 ------------------------------------ -This control turns the tone control on or off. The samples for front, rear -and center / LFE outputs are affected. +This control turns the tone control on or off. The samples forwarded to +the speaker outputs are affected.
name='Tone Control - Bass',index=0 ---------------------------------- @@ -212,8 +213,7 @@ The closest value to pure signal is 20.
name='Master Playback Volume',index=0 ------------------------------------- -This control is used to attenuate samples for front, surround, center and -LFE outputs. +This control is used to attenuate samples forwarded to the speaker outputs.
name='IEC958 Optical Raw Playback Switch',index=0 ------------------------------------------------- diff --git a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst index 4dd9bfe01bd8..27667f58aae1 100644 --- a/Documentation/sound/cards/sb-live-mixer.rst +++ b/Documentation/sound/cards/sb-live-mixer.rst @@ -61,61 +61,61 @@ FX-bus
``name='Wave Playback Volume',index=0`` --------------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples. The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
``name='Wave Surround Playback Volume',index=0`` ------------------------------------------------ -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples. The result samples are forwarded to the rear I2S DACs. These DACs operates separately (they are not inside the AC97 codec).
``name='Wave Center Playback Volume',index=0`` ---------------------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples. The result is mixed to mono signal (single channel) and forwarded to the ??rear?? right DAC PCM slot of the AC97 codec.
``name='Wave LFE Playback Volume',index=0`` ------------------------------------------- -This control is used to attenuate samples for left and right PCM FX-bus +This control is used to attenuate samples from left and right PCM FX-bus accumulators. ALSA uses accumulators 0 and 1 for left and right PCM. The result is mixed to mono signal (single channel) and forwarded to the ??rear?? left DAC PCM slot of the AC97 codec.
``name='Wave Capture Volume',index=0``, ``name='Wave Capture Switch',index=0`` ------------------------------------------------------------------------------ -These controls are used to attenuate samples for left and right PCM FX-bus +These controls are used to attenuate samples from left and right PCM FX-bus accumulator. ALSA uses accumulators 0 and 1 for left and right PCM. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
``name='Synth Playback Volume',index=0`` ---------------------------------------- -This control is used to attenuate samples for left and right MIDI FX-bus +This control is used to attenuate samples from left and right MIDI FX-bus accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples. The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
``name='Synth Capture Volume',index=0``, ``name='Synth Capture Switch',index=0`` -------------------------------------------------------------------------------- -These controls are used to attenuate samples for left and right MIDI FX-bus -accumulator. ALSA uses accumulators 4 and 5 for left and right PCM. +These controls are used to attenuate samples from left and right MIDI FX-bus +accumulator. ALSA uses accumulators 4 and 5 for left and right MIDI samples. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
``name='Surround Playback Volume',index=0`` ------------------------------------------- -This control is used to attenuate samples for left and right rear PCM FX-bus +This control is used to attenuate samples from left and right rear PCM FX-bus accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples. The result samples are forwarded to the rear I2S DACs. These DACs operate separately (they are not inside the AC97 codec).
``name='Surround Capture Volume',index=0``, ``name='Surround Capture Switch',index=0`` -------------------------------------------------------------------------------------- -These controls are used to attenuate samples for left and right rear PCM FX-bus +These controls are used to attenuate samples from left and right rear PCM FX-bus accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device). @@ -134,18 +134,18 @@ to the ??rear?? left DAC PCM slot of the AC97 codec.
``name='AC97 Playback Volume',index=0`` --------------------------------------- -This control is used to attenuate samples for left and right front ADC PCM slots +This control is used to attenuate samples from left and right front ADC PCM slots of the AC97 codec. The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
.. note:: This control should be zero for the standard operations, otherwise a digital loopback is activated.
``name='AC97 Capture Volume',index=0`` -------------------------------------- -This control is used to attenuate samples for left and right front ADC PCM slots +This control is used to attenuate samples from left and right front ADC PCM slots of the AC97 codec. The result is forwarded to the ADC capture FIFO (thus to the standard capture PCM device).