This patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and fsl_spdif.c drivers.
Signed-off-by: Nicolin Chen b42378@freescale.com --- Changelog v10->v11: * Use boolean properties for spdif-out/in switch instead of codec phandles. * Accordingly create dummy codec driver in probe() instead of DT nodes.
.../devicetree/bindings/sound/imx-audio-spdif.txt | 34 +++++ sound/soc/fsl/Kconfig | 11 ++ sound/soc/fsl/Makefile | 2 + sound/soc/fsl/imx-spdif.c | 152 ++++++++++++++++++++ 4 files changed, 199 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 sound/soc/fsl/imx-spdif.c
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt new file mode 100644 index 0000000..7d13479 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt @@ -0,0 +1,34 @@ +Freescale i.MX audio complex with S/PDIF transceiver + +Required properties: + + - compatible : "fsl,imx-audio-spdif" + + - model : The user-visible name of this sound complex + + - spdif-controller : The phandle of the i.MX S/PDIF controller + + +Optional properties: + + - spdif-out : This is a boolean property. If present, the transmitting + function of S/PDIF will be enabled, indicating there's a physical + S/PDIF out connector/jack on the board or it's connecting to some + other IP block, such as an HDMI encoder/display-controller. + + - spdif-in : This is a boolean property. If present, the receiving + function of S/PDIF will be enabled, indicating there's a physical + S/PDIF in connector/jack on the board. + +* Note: At least one of these two properties should be set in the DT binding. + + +Example: + +sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; +}; diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index cd088cc..a708380 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -193,6 +193,17 @@ config SND_SOC_IMX_SGTL5000 Say Y if you want to add support for SoC audio on an i.MX board with a sgtl5000 codec.
+config SND_SOC_IMX_SPDIF + tristate "SoC Audio support for i.MX boards with S/PDIF" + select SND_SOC_IMX_PCM_DMA + select SND_SOC_FSL_SPDIF + select SND_SOC_FSL_UTILS + select SND_SOC_SPDIF + help + SoC Audio support for i.MX boards with S/PDIF + Say Y if you want to add support for SoC audio on an i.MX board with + a S/DPDIF. + config SND_SOC_IMX_MC13783 tristate "SoC Audio support for I.MX boards with mc13783" depends on MFD_MC13783 && ARM diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index 4b5970e..e2aaff7 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -45,6 +45,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o snd-soc-wm1133-ev1-objs := wm1133-ev1.o snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o snd-soc-imx-wm8962-objs := imx-wm8962.o +snd-soc-imx-spdif-objs :=imx-spdif.o snd-soc-imx-mc13783-objs := imx-mc13783.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o @@ -53,4 +54,5 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o +obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o diff --git a/sound/soc/fsl/imx-spdif.c b/sound/soc/fsl/imx-spdif.c new file mode 100644 index 0000000..af5b553 --- /dev/null +++ b/sound/soc/fsl/imx-spdif.c @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/of_platform.h> +#include <sound/soc.h> + +struct imx_spdif_data { + struct snd_soc_dai_link dai[2]; + struct snd_soc_card card; + struct platform_device *txdev; + struct platform_device *rxdev; +}; + +static int imx_spdif_audio_probe(struct platform_device *pdev) +{ + struct device_node *spdif_np, *np = pdev->dev.of_node; + struct platform_device *spdif_pdev; + struct imx_spdif_data *data; + int ret = 0, num_links = 0; + + spdif_np = of_parse_phandle(np, "spdif-controller", 0); + if (!spdif_np) { + dev_err(&pdev->dev, "failed to find spdif-controller\n"); + ret = -EINVAL; + goto end; + } + + spdif_pdev = of_find_device_by_node(spdif_np); + if (!spdif_pdev) { + dev_err(&pdev->dev, "failed to find S/PDIF device\n"); + ret = -EINVAL; + goto end; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + ret = -ENOMEM; + goto end; + } + + if (of_property_read_bool(np, "spdif-out")) { + data->dai[num_links].name = "S/PDIF TX"; + data->dai[num_links].stream_name = "S/PDIF PCM Playback"; + data->dai[num_links].codec_dai_name = "dit-hifi"; + data->dai[num_links].codec_name = "spdif-dit"; + data->dai[num_links].cpu_of_node = spdif_np; + data->dai[num_links].platform_of_node = spdif_np; + num_links++; + } + + if (of_property_read_bool(np, "spdif-in")) { + data->dai[num_links].name = "S/PDIF RX"; + data->dai[num_links].stream_name = "S/PDIF PCM Capture"; + data->dai[num_links].codec_dai_name = "dir-hifi"; + data->dai[num_links].codec_name = "spdif-dir"; + data->dai[num_links].cpu_of_node = spdif_np; + data->dai[num_links].platform_of_node = spdif_np; + num_links++; + } + + if (!num_links) { + dev_err(&pdev->dev, "no enabled S/PDIF DAI link\n"); + goto end; + } + + data->card.dev = &pdev->dev; + data->card.num_links = num_links; + data->card.dai_link = data->dai; + + ret = snd_soc_of_parse_card_name(&data->card, "model"); + if (ret) + goto end; + + data->txdev = platform_device_register_simple("spdif-dit", -1, NULL, 0); + if (IS_ERR(data->txdev)) { + ret = PTR_ERR(data->txdev); + dev_err(&pdev->dev, "register spdif-dit failed (%d)\n", ret); + goto end; + } + + data->rxdev = platform_device_register_simple("spdif-dir", -1, NULL, 0); + if (IS_ERR(data->rxdev)) { + ret = PTR_ERR(data->rxdev); + dev_err(&pdev->dev, "register spdif-dir failed (%d)\n", ret); + goto error_dit; + } + + ret = snd_soc_register_card(&data->card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); + goto error_dir; + } + + platform_set_drvdata(pdev, data); + + goto end; + +error_dir: + platform_device_unregister(data->rxdev); +error_dit: + platform_device_unregister(data->txdev); +end: + if (spdif_np) + of_node_put(spdif_np); + + return ret; +} + +static int imx_spdif_audio_remove(struct platform_device *pdev) +{ + struct imx_spdif_data *data = platform_get_drvdata(pdev); + + platform_device_unregister(data->rxdev); + platform_device_unregister(data->txdev); + + snd_soc_unregister_card(&data->card); + + return 0; +} + +static const struct of_device_id imx_spdif_dt_ids[] = { + { .compatible = "fsl,imx-audio-spdif", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_spdif_dt_ids); + +static struct platform_driver imx_spdif_driver = { + .driver = { + .name = "imx-spdif", + .owner = THIS_MODULE, + .of_match_table = imx_spdif_dt_ids, + }, + .probe = imx_spdif_audio_probe, + .remove = imx_spdif_audio_remove, +}; + +module_platform_driver(imx_spdif_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("Freescale i.MX S/PDIF machine driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:imx-spdif");