The patch
ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From aa43112445f0f3b7b30ea2189218fcbd437c28ec Mon Sep 17 00:00:00 2001
From: Peter Rosin peda@axentia.se Date: Tue, 15 Nov 2016 19:38:15 +0100 Subject: [PATCH] ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850
The TSE-850 is an FM Transmitter Station Equipment, designed to generate baseband signals for FM, mainly the DARC subcarrier, but other signals are also possible.
Signed-off-by: Peter Rosin peda@axentia.se Signed-off-by: Mark Brown broonie@kernel.org --- MAINTAINERS | 1 + sound/soc/atmel/Kconfig | 10 + sound/soc/atmel/Makefile | 2 + sound/soc/atmel/tse850-pcm5142.c | 472 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 485 insertions(+) create mode 100644 sound/soc/atmel/tse850-pcm5142.c
diff --git a/MAINTAINERS b/MAINTAINERS index 35485fd86e73..0dc36a9c61cd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2322,6 +2322,7 @@ M: Peter Rosin peda@axentia.se L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/sound/axentia,* +F: sound/soc/atmel/tse850-pcm5142.c
AZ6007 DVB DRIVER M: Mauro Carvalho Chehab mchehab@s-opensource.com diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index 22aec9a1e9a4..4a56f3dfba51 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -78,4 +78,14 @@ config SND_ATMEL_SOC_PDMIC help Say Y if you want to add support for Atmel ASoC driver for boards using PDMIC. + +config SND_ATMEL_SOC_TSE850_PCM5142 + tristate "ASoC driver for the Axentia TSE-850" + depends on ARCH_AT91 && OF + depends on ATMEL_SSC && I2C + select SND_ATMEL_SOC_SSC_DMA + select SND_SOC_PCM512x_I2C + help + Say Y if you want to add support for the ASoC driver for the + Axentia TSE-850 with a PCM5142 codec. endif diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile index a2b127bd9c87..67e10cbd4ed7 100644 --- a/sound/soc/atmel/Makefile +++ b/sound/soc/atmel/Makefile @@ -13,9 +13,11 @@ snd-atmel-soc-wm8904-objs := atmel_wm8904.o snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o snd-atmel-soc-classd-objs := atmel-classd.o snd-atmel-soc-pdmic-objs := atmel-pdmic.o +snd-atmel-soc-tse850-pcm5142-objs := tse850-pcm5142.o
obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o obj-$(CONFIG_SND_ATMEL_SOC_CLASSD) += snd-atmel-soc-classd.o obj-$(CONFIG_SND_ATMEL_SOC_PDMIC) += snd-atmel-soc-pdmic.o +obj-$(CONFIG_SND_ATMEL_SOC_TSE850_PCM5142) += snd-atmel-soc-tse850-pcm5142.o diff --git a/sound/soc/atmel/tse850-pcm5142.c b/sound/soc/atmel/tse850-pcm5142.c new file mode 100644 index 000000000000..ac6a814c8ecf --- /dev/null +++ b/sound/soc/atmel/tse850-pcm5142.c @@ -0,0 +1,472 @@ +/* + * TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec + * + * Copyright (C) 2016 Axentia Technologies AB + * + * Author: Peter Rosin peda@axentia.se + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * loop1 relays + * IN1 +---o +------------+ o---+ OUT1 + * \ / + * + + + * | / | + * +--o +--. | + * | add | | + * | V | + * | .---. | + * DAC +----------->|Sum|---+ + * | '---' | + * | | + * + + + * + * IN2 +---o--+------------+--o---+ OUT2 + * loop2 relays + * + * The 'loop1' gpio pin controlls two relays, which are either in loop + * position, meaning that input and output are directly connected, or + * they are in mixer position, meaning that the signal is passed through + * the 'Sum' mixer. Similarly for 'loop2'. + * + * In the above, the 'loop1' relays are inactive, thus feeding IN1 to the + * mixer (if 'add' is active) and feeding the mixer output to OUT1. The + * 'loop2' relays are active, short-cutting the TSE-850 from channel 2. + * IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name + * of the (filtered) output from the PCM5142 codec. + */ + +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/regulator/consumer.h> + +#include <sound/soc.h> +#include <sound/pcm_params.h> + +#include "atmel_ssc_dai.h" + +struct tse850_priv { + int ssc_id; + + struct gpio_desc *add; + struct gpio_desc *loop1; + struct gpio_desc *loop2; + + struct regulator *ana; + + int add_cache; + int loop1_cache; + int loop2_cache; +}; + +static int tse850_get_mux1(struct snd_kcontrol *kctrl, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); + struct snd_soc_card *card = dapm->card; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + + ucontrol->value.enumerated.item[0] = tse850->loop1_cache; + + return 0; +} + +static int tse850_put_mux1(struct snd_kcontrol *kctrl, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); + struct snd_soc_card *card = dapm->card; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + struct soc_enum *e = (struct soc_enum *)kctrl->private_value; + unsigned int val = ucontrol->value.enumerated.item[0]; + + if (val >= e->items) + return -EINVAL; + + gpiod_set_value_cansleep(tse850->loop1, val); + tse850->loop1_cache = val; + + return snd_soc_dapm_put_enum_double(kctrl, ucontrol); +} + +static int tse850_get_mux2(struct snd_kcontrol *kctrl, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); + struct snd_soc_card *card = dapm->card; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + + ucontrol->value.enumerated.item[0] = tse850->loop2_cache; + + return 0; +} + +static int tse850_put_mux2(struct snd_kcontrol *kctrl, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); + struct snd_soc_card *card = dapm->card; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + struct soc_enum *e = (struct soc_enum *)kctrl->private_value; + unsigned int val = ucontrol->value.enumerated.item[0]; + + if (val >= e->items) + return -EINVAL; + + gpiod_set_value_cansleep(tse850->loop2, val); + tse850->loop2_cache = val; + + return snd_soc_dapm_put_enum_double(kctrl, ucontrol); +} + +int tse850_get_mix(struct snd_kcontrol *kctrl, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); + struct snd_soc_card *card = dapm->card; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + + ucontrol->value.enumerated.item[0] = tse850->add_cache; + + return 0; +} + +int tse850_put_mix(struct snd_kcontrol *kctrl, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); + struct snd_soc_card *card = dapm->card; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + int connect = !!ucontrol->value.integer.value[0]; + + if (tse850->add_cache == connect) + return 0; + + /* + * Hmmm, this gpiod_set_value_cansleep call should probably happen + * inside snd_soc_dapm_mixer_update_power in the loop. + */ + gpiod_set_value_cansleep(tse850->add, connect); + tse850->add_cache = connect; + + snd_soc_dapm_mixer_update_power(dapm, kctrl, connect, NULL); + return 1; +} + +int tse850_get_ana(struct snd_kcontrol *kctrl, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); + struct snd_soc_card *card = dapm->card; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + int ret; + + ret = regulator_get_voltage(tse850->ana); + if (ret < 0) + return ret; + + /* + * Map regulator output values like so: + * -11.5V to "Low" (enum 0) + * 11.5V-12.5V to "12V" (enum 1) + * 12.5V-13.5V to "13V" (enum 2) + * ... + * 18.5V-19.5V to "19V" (enum 8) + * 19.5V- to "20V" (enum 9) + */ + if (ret < 11000000) + ret = 11000000; + else if (ret > 20000000) + ret = 20000000; + ret -= 11000000; + ret = (ret + 500000) / 1000000; + + ucontrol->value.enumerated.item[0] = ret; + + return 0; +} + +int tse850_put_ana(struct snd_kcontrol *kctrl, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl); + struct snd_soc_card *card = dapm->card; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + struct soc_enum *e = (struct soc_enum *)kctrl->private_value; + unsigned int uV = ucontrol->value.enumerated.item[0]; + int ret; + + if (uV >= e->items) + return -EINVAL; + + /* + * Map enum zero (Low) to 2 volts on the regulator, do this since + * the ana regulator is supplied by the system 12V voltage and + * requesting anything below the system voltage causes the system + * voltage to be passed through the regulator. Also, the ana + * regulator induces noise when requesting voltages near the + * system voltage. So, by mapping Low to 2V, that noise is + * eliminated when all that is needed is 12V (the system voltage). + */ + if (uV) + uV = 11000000 + (1000000 * uV); + else + uV = 2000000; + + ret = regulator_set_voltage(tse850->ana, uV, uV); + if (ret < 0) + return ret; + + return snd_soc_dapm_put_enum_double(kctrl, ucontrol); +} + +static const char * const mux_text[] = { "Mixer", "Loop" }; + +static const struct soc_enum mux_enum = + SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, 2, mux_text); + +static const struct snd_kcontrol_new mux1 = + SOC_DAPM_ENUM_EXT("MUX1", mux_enum, tse850_get_mux1, tse850_put_mux1); + +static const struct snd_kcontrol_new mux2 = + SOC_DAPM_ENUM_EXT("MUX2", mux_enum, tse850_get_mux2, tse850_put_mux2); + +#define TSE850_DAPM_SINGLE_EXT(xname, reg, shift, max, invert, xget, xput) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw, \ + .get = xget, \ + .put = xput, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } + +static const struct snd_kcontrol_new mix[] = { + TSE850_DAPM_SINGLE_EXT("IN Switch", SND_SOC_NOPM, 0, 1, 0, + tse850_get_mix, tse850_put_mix), +}; + +static const char * const ana_text[] = { + "Low", "12V", "13V", "14V", "15V", "16V", "17V", "18V", "19V", "20V" +}; + +static const struct soc_enum ana_enum = + SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, 9, ana_text); + +static const struct snd_kcontrol_new out = + SOC_DAPM_ENUM_EXT("ANA", ana_enum, tse850_get_ana, tse850_put_ana); + +static const struct snd_soc_dapm_widget tse850_dapm_widgets[] = { + SND_SOC_DAPM_LINE("OUT1", NULL), + SND_SOC_DAPM_LINE("OUT2", NULL), + SND_SOC_DAPM_LINE("IN1", NULL), + SND_SOC_DAPM_LINE("IN2", NULL), + SND_SOC_DAPM_INPUT("DAC"), + SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0), + SOC_MIXER_ARRAY("MIX", SND_SOC_NOPM, 0, 0, mix), + SND_SOC_DAPM_MUX("MUX1", SND_SOC_NOPM, 0, 0, &mux1), + SND_SOC_DAPM_MUX("MUX2", SND_SOC_NOPM, 0, 0, &mux2), + SND_SOC_DAPM_OUT_DRV("OUT", SND_SOC_NOPM, 0, 0, &out, 1), +}; + +/* + * These connections are not entirely correct, since both IN1 and IN2 + * are always fed to MIX (if the "IN switch" is set so), i.e. without + * regard to the loop1 and loop2 relays that according to this only + * control MUX1 and MUX2 but in fact also control how the input signals + * are routed. + * But, 1) I don't know how to do it right, and 2) it doesn't seem to + * matter in practice since nothing is powered in those sections anyway. + */ +static const struct snd_soc_dapm_route tse850_intercon[] = { + { "OUT1", NULL, "MUX1" }, + { "OUT2", NULL, "MUX2" }, + + { "MUX1", "Loop", "IN1" }, + { "MUX1", "Mixer", "OUT" }, + + { "MUX2", "Loop", "IN2" }, + { "MUX2", "Mixer", "OUT" }, + + { "OUT", NULL, "MIX" }, + + { "MIX", NULL, "DAC" }, + { "MIX", "IN Switch", "IN1" }, + { "MIX", "IN Switch", "IN2" }, + + /* connect board input to the codec left channel output pin */ + { "DAC", NULL, "OUTL" }, +}; + +static struct snd_soc_dai_link tse850_dailink = { + .name = "TSE-850", + .stream_name = "TSE-850-PCM", + .codec_dai_name = "pcm512x-hifi", + .dai_fmt = SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFS, +}; + +static struct snd_soc_card tse850_card = { + .name = "TSE-850-ASoC", + .owner = THIS_MODULE, + .dai_link = &tse850_dailink, + .num_links = 1, + .dapm_widgets = tse850_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tse850_dapm_widgets), + .dapm_routes = tse850_intercon, + .num_dapm_routes = ARRAY_SIZE(tse850_intercon), + .fully_routed = true, +}; + +static int tse850_dt_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *codec_np, *cpu_np; + struct snd_soc_card *card = &tse850_card; + struct snd_soc_dai_link *dailink = &tse850_dailink; + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + + if (!np) { + dev_err(&pdev->dev, "only device tree supported\n"); + return -EINVAL; + } + + cpu_np = of_parse_phandle(np, "axentia,ssc-controller", 0); + if (!cpu_np) { + dev_err(&pdev->dev, "failed to get dai and pcm info\n"); + return -EINVAL; + } + dailink->cpu_of_node = cpu_np; + dailink->platform_of_node = cpu_np; + tse850->ssc_id = of_alias_get_id(cpu_np, "ssc"); + of_node_put(cpu_np); + + codec_np = of_parse_phandle(np, "axentia,audio-codec", 0); + if (!codec_np) { + dev_err(&pdev->dev, "failed to get codec info\n"); + return -EINVAL; + } + dailink->codec_of_node = codec_np; + of_node_put(codec_np); + + return 0; +} + +static int tse850_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &tse850_card; + struct device *dev = card->dev = &pdev->dev; + struct tse850_priv *tse850; + int ret; + + tse850 = devm_kzalloc(dev, sizeof(*tse850), GFP_KERNEL); + if (!tse850) + return -ENOMEM; + + snd_soc_card_set_drvdata(card, tse850); + + ret = tse850_dt_init(pdev); + if (ret) { + dev_err(dev, "failed to init dt info\n"); + return ret; + } + + tse850->add = devm_gpiod_get(dev, "axentia,add", GPIOD_OUT_HIGH); + if (IS_ERR(tse850->add)) { + if (PTR_ERR(tse850->add) != -EPROBE_DEFER) + dev_err(dev, "failed to get 'add' gpio\n"); + return PTR_ERR(tse850->add); + } + tse850->add_cache = 1; + + tse850->loop1 = devm_gpiod_get(dev, "axentia,loop1", GPIOD_OUT_HIGH); + if (IS_ERR(tse850->loop1)) { + if (PTR_ERR(tse850->loop1) != -EPROBE_DEFER) + dev_err(dev, "failed to get 'loop1' gpio\n"); + return PTR_ERR(tse850->loop1); + } + tse850->loop1_cache = 1; + + tse850->loop2 = devm_gpiod_get(dev, "axentia,loop2", GPIOD_OUT_HIGH); + if (IS_ERR(tse850->loop2)) { + if (PTR_ERR(tse850->loop2) != -EPROBE_DEFER) + dev_err(dev, "failed to get 'loop2' gpio\n"); + return PTR_ERR(tse850->loop2); + } + tse850->loop2_cache = 1; + + tse850->ana = devm_regulator_get(dev, "axentia,ana"); + if (IS_ERR(tse850->ana)) { + if (PTR_ERR(tse850->ana) != -EPROBE_DEFER) + dev_err(dev, "failed to get 'ana' regulator\n"); + return PTR_ERR(tse850->ana); + } + + ret = regulator_enable(tse850->ana); + if (ret < 0) { + dev_err(dev, "failed to enable the 'ana' regulator\n"); + return ret; + } + + ret = atmel_ssc_set_audio(tse850->ssc_id); + if (ret != 0) { + dev_err(dev, + "failed to set SSC %d for audio\n", tse850->ssc_id); + goto err_disable_ana; + } + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(dev, "snd_soc_register_card failed\n"); + goto err_put_audio; + } + + return 0; + +err_put_audio: + atmel_ssc_put_audio(tse850->ssc_id); +err_disable_ana: + regulator_disable(tse850->ana); + return ret; +} + +static int tse850_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card); + + snd_soc_unregister_card(card); + atmel_ssc_put_audio(tse850->ssc_id); + regulator_disable(tse850->ana); + + return 0; +} + +static const struct of_device_id tse850_dt_ids[] = { + { .compatible = "axentia,tse850-pcm5142", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, tse850_dt_ids); + +static struct platform_driver tse850_driver = { + .driver = { + .name = "axentia-tse850-pcm5142", + .of_match_table = of_match_ptr(tse850_dt_ids), + }, + .probe = tse850_probe, + .remove = tse850_remove, +}; + +module_platform_driver(tse850_driver); + +/* Module information */ +MODULE_AUTHOR("Peter Rosin peda@axentia.se"); +MODULE_DESCRIPTION("ALSA SoC driver for TSE-850 with PCM5142 codec"); +MODULE_LICENSE("GPL");