<dustin <at> seznam.cz> writes:
Hi Ross,
I apologize for a delayed reply. Joint work on adding support to your card
sounds certainly interesting to
me, it's just the current time pressure and a work on another card I would
like to finish first. One or two
weeks I hope.
Regards,
Pavel.
Hi Pavel,
No worries on the delayed response, just glad to hear that support can be added. I will continue to read through alsa documentation and try to get as far as I can on my own over the next few weeks and then will give you an update on my progress at this stage.
I suspect it will not be possible to use the complete aureon driver. The hitpoint (and av710) uses a combination of the 6 channel vt1616 codec (ac-link) and the 2 channel wolfson WM8728 (I2S) to achieve the 8 channels. The aureon uses the 8 channel wm8770 which is all I2s. You may be able to advise that despite the differences in chip the control of the envy24ht-s remains the same? But as far as I can see the envy chip has different modes to make use of ac-link, i2s or a mix of both.
Hopefully the cs8415 is hooked up in exactly the same way on both cards and therefore this code will be reuseable.
Of course I would be glad to hear from anyone who has experience in adapting ALSA drivers in the way that is required here. The resultant driver will most likely add spdif input functionality to the more readily available maddog entertainer 7.1 under linux (unless someone can confirm that this is already working).
Cheers,
Ross