If an OSS application calls SNDCTL_DSP_SYNC, then ALSA will call the driver's _hw_params and _prepare functions again. On the Freescale MPC8610 DMA ASoC driver, this caused the DMA controller to be unneccessarily re-programmed, and apparently it doesn't like that. The DMA will then not operate when instructed. This patch relocates much of the DMA programming to fsl_dma_open(), which is called only once.
Signed-off-by: Timur Tabi timur@freescale.com ---
This patch is for 2.6.27. A separate patch for ASoC V2 will be posted later.
sound/soc/fsl/fsl_dma.c | 235 +++++++++++++++++++++++++---------------------- 1 files changed, 124 insertions(+), 111 deletions(-)
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 7ceea2b..d2d3da9 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -327,14 +327,75 @@ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai, * fsl_dma_open: open a new substream. * * Each substream has its own DMA buffer. + * + * ALSA divides the DMA buffer into N periods. We create NUM_DMA_LINKS link + * descriptors that ping-pong from one period to the next. For example, if + * there are six periods and two link descriptors, this is how they look + * before playback starts: + * + * The last link descriptor + * ____________ points back to the first + * | | + * V | + * ___ ___ | + * | |->| |->| + * |___| |___| + * | | + * | | + * V V + * _________________________________________ + * | | | | | | | The DMA buffer is + * | | | | | | | divided into 6 parts + * |______|______|______|______|______|______| + * + * and here's how they look after the first period is finished playing: + * + * ____________ + * | | + * V | + * ___ ___ | + * | |->| |->| + * |___| |___| + * | | + * |______________ + * | | + * V V + * _________________________________________ + * | | | | | | | + * | | | | | | | + * |______|______|______|______|______|______| + * + * The first link descriptor now points to the third period. The DMA + * controller is currently playing the second period. When it finishes, it + * will jump back to the first descriptor and play the third period. + * + * There are four reasons we do this: + * + * 1. The only way to get the DMA controller to automatically restart the + * transfer when it gets to the end of the buffer is to use chaining + * mode. Basic direct mode doesn't offer that feature. + * 2. We need to receive an interrupt at the end of every period. The DMA + * controller can generate an interrupt at the end of every link transfer + * (aka segment). Making each period into a DMA segment will give us the + * interrupts we need. + * 3. By creating only two link descriptors, regardless of the number of + * periods, we do not need to reallocate the link descriptors if the + * number of periods changes. + * 4. All of the audio data is still stored in a single, contiguous DMA + * buffer, which is what ALSA expects. We're just dividing it into + * contiguous parts, and creating a link descriptor for each one. */ static int fsl_dma_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_dma_private *dma_private; + struct ccsr_dma_channel __iomem *dma_channel; dma_addr_t ld_buf_phys; + u64 temp_link; /* Pointer to next link descriptor */ + u32 mr; unsigned int channel; int ret = 0; + unsigned int i;
/* * Reject any DMA buffer whose size is not a multiple of the period @@ -395,68 +456,74 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) snd_soc_set_runtime_hwparams(substream, &fsl_dma_hardware); runtime->private_data = dma_private;
+ /* Program the fixed DMA controller parameters */ + + dma_channel = dma_private->dma_channel; + + temp_link = dma_private->ld_buf_phys + + sizeof(struct fsl_dma_link_descriptor); + + for (i = 0; i < NUM_DMA_LINKS; i++) { + struct fsl_dma_link_descriptor *link = &dma_private->link[i]; + + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->next = cpu_to_be64(temp_link); + + temp_link += sizeof(struct fsl_dma_link_descriptor); + } + /* The last link descriptor points to the first */ + dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys); + + /* Tell the DMA controller where the first link descriptor is */ + out_be32(&dma_channel->clndar, + CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys)); + out_be32(&dma_channel->eclndar, + CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys)); + + /* The manual says the BCR must be clear before enabling EMP */ + out_be32(&dma_channel->bcr, 0); + + /* + * Program the mode register for interrupts, external master control, + * and source/destination hold. Also clear the Channel Abort bit. + */ + mr = in_be32(&dma_channel->mr) & + ~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE); + + /* + * We want External Master Start and External Master Pause enabled, + * because the SSI is controlling the DMA controller. We want the DMA + * controller to be set up in advance, and then we signal only the SSI + * to start transferring. + * + * We want End-Of-Segment Interrupts enabled, because this will generate + * an interrupt at the end of each segment (each link descriptor + * represents one segment). Each DMA segment is the same thing as an + * ALSA period, so this is how we get an interrupt at the end of every + * period. + * + * We want Error Interrupt enabled, so that we can get an error if + * the DMA controller is mis-programmed somehow. + */ + mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN | + CCSR_DMA_MR_EMS_EN; + + /* For playback, we want the destination address to be held. For + capture, set the source address to be held. */ + mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE; + + out_be32(&dma_channel->mr, mr); + return 0; }
/** - * fsl_dma_hw_params: allocate the DMA buffer and the DMA link descriptors. - * - * ALSA divides the DMA buffer into N periods. We create NUM_DMA_LINKS link - * descriptors that ping-pong from one period to the next. For example, if - * there are six periods and two link descriptors, this is how they look - * before playback starts: - * - * The last link descriptor - * ____________ points back to the first - * | | - * V | - * ___ ___ | - * | |->| |->| - * |___| |___| - * | | - * | | - * V V - * _________________________________________ - * | | | | | | | The DMA buffer is - * | | | | | | | divided into 6 parts - * |______|______|______|______|______|______| - * - * and here's how they look after the first period is finished playing: - * - * ____________ - * | | - * V | - * ___ ___ | - * | |->| |->| - * |___| |___| - * | | - * |______________ - * | | - * V V - * _________________________________________ - * | | | | | | | - * | | | | | | | - * |______|______|______|______|______|______| + * fsl_dma_hw_params: continue initializing the DMA links * - * The first link descriptor now points to the third period. The DMA - * controller is currently playing the second period. When it finishes, it - * will jump back to the first descriptor and play the third period. - * - * There are four reasons we do this: - * - * 1. The only way to get the DMA controller to automatically restart the - * transfer when it gets to the end of the buffer is to use chaining - * mode. Basic direct mode doesn't offer that feature. - * 2. We need to receive an interrupt at the end of every period. The DMA - * controller can generate an interrupt at the end of every link transfer - * (aka segment). Making each period into a DMA segment will give us the - * interrupts we need. - * 3. By creating only two link descriptors, regardless of the number of - * periods, we do not need to reallocate the link descriptors if the - * number of periods changes. - * 4. All of the audio data is still stored in a single, contiguous DMA - * buffer, which is what ALSA expects. We're just dividing it into - * contiguous parts, and creating a link descriptor for each one. + * This function obtains hardware parameters about the opened stream and + * programs the DMA controller accordingly. * * Note that due to a quirk of the SSI's STX register, the target address * for the DMA operations depends on the sample size. So we don't program @@ -468,11 +535,8 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, { struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_dma_private *dma_private = runtime->private_data; - struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel;
dma_addr_t temp_addr; /* Pointer to next period */ - u64 temp_link; /* Pointer to next link descriptor */ - u32 mr; /* Temporary variable for MR register */
unsigned int i;
@@ -490,8 +554,6 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, dma_private->dma_buf_next = dma_private->dma_buf_phys;
/* - * Initialize each link descriptor. - * * The actual address in STX0 (destination for playback, source for * capture) is based on the sample size, but we don't know the sample * size in this function, so we'll have to adjust that later. See @@ -507,16 +569,11 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, * buffer itself. */ temp_addr = substream->dma_buffer.addr; - temp_link = dma_private->ld_buf_phys + - sizeof(struct fsl_dma_link_descriptor);
for (i = 0; i < NUM_DMA_LINKS; i++) { struct fsl_dma_link_descriptor *link = &dma_private->link[i];
link->count = cpu_to_be32(period_size); - link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->next = cpu_to_be64(temp_link);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) link->source_addr = cpu_to_be32(temp_addr); @@ -524,51 +581,7 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, link->dest_addr = cpu_to_be32(temp_addr);
temp_addr += period_size; - temp_link += sizeof(struct fsl_dma_link_descriptor); } - /* The last link descriptor points to the first */ - dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys); - - /* Tell the DMA controller where the first link descriptor is */ - out_be32(&dma_channel->clndar, - CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys)); - out_be32(&dma_channel->eclndar, - CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys)); - - /* The manual says the BCR must be clear before enabling EMP */ - out_be32(&dma_channel->bcr, 0); - - /* - * Program the mode register for interrupts, external master control, - * and source/destination hold. Also clear the Channel Abort bit. - */ - mr = in_be32(&dma_channel->mr) & - ~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE); - - /* - * We want External Master Start and External Master Pause enabled, - * because the SSI is controlling the DMA controller. We want the DMA - * controller to be set up in advance, and then we signal only the SSI - * to start transfering. - * - * We want End-Of-Segment Interrupts enabled, because this will generate - * an interrupt at the end of each segment (each link descriptor - * represents one segment). Each DMA segment is the same thing as an - * ALSA period, so this is how we get an interrupt at the end of every - * period. - * - * We want Error Interrupt enabled, so that we can get an error if - * the DMA controller is mis-programmed somehow. - */ - mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN | - CCSR_DMA_MR_EMS_EN; - - /* For playback, we want the destination address to be held. For - capture, set the source address to be held. */ - mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE; - - out_be32(&dma_channel->mr, mr);
return 0; }