On 2011-03-07 15:15, Mark Brown wrote:
On Mon, Mar 07, 2011 at 01:45:13PM +0100, Christian Glindkamp wrote:
+static int max9850_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)+{
- switch (level) {
- case SND_SOC_BIAS_ON:
break;- case SND_SOC_BIAS_PREPARE:
snd_soc_update_bits(codec, MAX9850_ENABLE, MAX9850_SHDN,MAX9850_SHDN);break;- case SND_SOC_BIAS_STANDBY:
snd_soc_update_bits(codec, MAX9850_ENABLE, MAX9850_SHDN, 0);break;- case SND_SOC_BIAS_OFF:
break;This pattern looks awfully like you should set idle_bias_off for the CODEC and then move the code blocks down one power level - _SHDN sounds like a general power down for the device which fits better with the _OFF state.
Or use DAPM like Dimitris suggested.
I've done so, because it seemed that after the first use, the codec is hold in standby (when not entering suspend) for the whole time. So I thought by moving shutdown to standby might save some milliamps. But I think I will go the DAPM route.
- /* enable slew-rate control */
- snd_soc_update_bits(codec, MAX9850_VOLUME, 0x40, 0x40);
- /* set slew-rate 125ms */
- snd_soc_update_bits(codec, MAX9850_CHARGE_PUMP, 0xff, 0xc0);
If this is for the charge pump this is fine but the _VOLUME makes it sound like this should perhaps be user visibile?
These bits control, whether the volume is set immediately or smoothly slewn between levels. I don't see a real reason a user would want to change it.
+static int max9850_remove(struct snd_soc_codec *codec) +{
- return 0;
+}
Just delete this if not required, all ASoC functions should be optional.
Will do this, even though Dimitris suggested setting the bias level to off, because it would still be a nop.